Wall Brackets, ML&S Martin Lynch and Sons Ltd

Product Sections

See what our customers have to say on our comments page.

PDF Downloads

Download PDF Leaflets, Brochures and Manuals

Wall Brackets

ML&S Store ¦ Accessories - General ¦ Barenco Antenna Hardware ¦ Wall Brackets

Accessories,Amateur Radio,anchor,Antenna,Antenna Analysers,Aviation,Aviation ,Baluns,Barenco,Barenco Antenna Hardware,bolt,brackets,cable grips,Chertsey,chimney,Coax Connections,Coaxail Cable,Commercial Two-Way Radio,DC Cable,Dummy Loads,Duplexcers,eyebolt,Gift Vouchers Insulators,ground ,guy stakes,Ham Radio,Hardware,Headphones,Icom Aerial Tuning Units,j bolt,Linear Amplifiers,Marine,Martin Lynch,mast clamps,Microphones,ML&S,Mobile Antenna Mounts,Morse Keys,plastic,Poles,polyproplene rope,Pre-amps,quick link,screwbolt,shackles,Sheave,snap hook,Speakers,Thimble,totaor,Turnbuckle,winches

Product: Gable End Bracket with 2.25" Clearance - BE303

Gable End Bracket with 2.25" Clearance - BE303

Wall bracket for masts which are not required to clear very large overhang.

People who bought this item also bought:

1. 2" 'V' Bolt x M8 x 4" - BE913

2. 2" 'V' Bolt x 3/8" W x 3.5" - BE915

3. Cable Stand - Off Bracket - BE502

Price: £8.27 (€10.38) Including VAT at 17.5%
Ex-VAT Price: £7.04 (€8.83)

Product: Gable End Bracket with 5.7" Clearance - BE304

Gable End Bracket with 5.7" Clearance - BE304

Wall bracket for masts which are not required to clear very large overhang.

People who bought this item also bought:

1. 2" 'V' Bolt x M10 x 70mm Stainless Steel - BE915SS

2. 4 Way Guy Clamp (With Eyes) Single Section - BE614/A

3. Snap Hook 8 x 80mm - BE923/80

Price: £9.00 (€11.29) Including VAT at 17.5%
Ex-VAT Price: £7.66 (€9.61)

Product: Channel Bracket 4" - BE305

	Wall brackets for masts which are required to clear very small or no overhang. Price: £11.44 (€14.35) Including VAT at 17.5% Ex-VAT Price: £9.74 (€12.22)

Product: Channel Bracket 6" - BE306

	Wall brackets for masts which are required to clear very small or no overhang. Price: £12.89 (€16.17) Including VAT at 17.5% Ex-VAT Price: £10.97 (€13.76)

Product: Wall Bracket K with 9" (235mm) Clearance - BE401/9

	Wall bracket to suit almost any application. Constructed from 40 x 40 x 5mm angle iron and totally seam welded. Price: £24.12 (€30.26) Including VAT at 17.5% Ex-VAT Price: £20.53 (€25.76)

Product: Wall Bracket K with 12" (310mm) Clearance - BE401/12

	Wall bracket to suit almost any application. Constructed from 40 x 40 x 5mm angle iron and totally seam welded. Price: £26.27 (€32.96) Including VAT at 17.5% Ex-VAT Price: £22.36 (€28.05)

Product: Wall Bracket K with 18" (460mm) Clearance - BE401/18

Wall Bracket K with 18" (460mm) Clearance - BE401/18

Wall bracket to suit almost any application. Constructed from 40 x 40 x 5mm angle iron and totally seam welded.

People who bought this item also bought:

1. 2" 'V' Bolt x 3/8" W x 3.5" - BE915

2. Wall Bracket T with 18" (460mm) Clearance - BE402/18

Price: £29.30 (€36.76) Including VAT at 17.5%
Ex-VAT Price: £24.94 (€31.29)

Product: Wall Bracket K with 24" (615mm) Clearance - BE401/24

Wall Bracket K with 24" (615mm) Clearance - BE401/24

Wall bracket to suit almost any application. Constructed from 40 x 40 x 5mm angle iron and totally seam welded.

People who bought this item also bought:

1. RG-213U Coax

2. 40mm Single Sheave Single Eye Pulley - 1100Kg - BE927/40

3. Self Amalgamating Tape

Price: £34.57 (€43.37) Including VAT at 17.5%
Ex-VAT Price: £29.42 (€36.91)

Product: Wall Bracket T with 9" (235mm) Clearance - BE402/9

	Wall bracket to suit almost any application. Constructed from 40 x 40 x 5mm angle iron and totally seam welded. Price: £13.96 (€17.51) Including VAT at 17.5% Ex-VAT Price: £11.88 (€14.90)

Product: Wall Bracket T with 12" (310mm) Clearance - BE402/12

	Wall bracket to suit almost any application. Constructed from 40 x 40 x 5mm angle iron and totally seam welded. Price: £15.91 (€19.96) Including VAT at 17.5% Ex-VAT Price: £13.54 (€16.99)

Product: Wall Bracket T with 18" (460mm) Clearance - BE402/18

Wall Bracket T with 18" (460mm) Clearance - BE402/18

Wall bracket to suit almost any application. Constructed from 40 x 40 x 5mm angle iron and totally seam welded.

People who bought this item also bought:

1. Wall Bracket K with 18" (460mm) Clearance - BE401/18

2. 2" 'V' Bolt x 3/8" W x 3.5" - BE915

Price: £17.48 (€21.93) Including VAT at 17.5%
Ex-VAT Price: £14.88 (€18.67)

Product: Wall Bracket T with 24" (615mm) Clearance - BE402/24

	Wall bracket to suit almost any application. Constructed from 40 x 40 x 5mm angle iron and totally seam welded. Price: £21.34 (€26.77) Including VAT at 17.5% Ex-VAT Price: £18.16 (€22.78)

Product: Parallel Tilt Over Bracket with 12" Clearance - BE404/12

	The BE404 is designed for areas where the mast much swing parallel to a wall giving access to the aerials. Price: £61.92 (€77.68) Including VAT at 17.5% Ex-VAT Price: £52.70 (€66.11)

Product: Parallel Tilt Over Bracket with 18" Clearance - BE404/18

	The BE404 is designed for areas where the mast much swing parallel to a wall giving access to the aerials. Price: £79.43 (€99.65) Including VAT at 17.5% Ex-VAT Price: £67.60 (€84.81)

Product: 3" Wall Bracket for 1.5" Mast - BE713/03

	A bracket of welded construction suitable for light aerials and short stand-off of 3" mast to wall clearance. Price: £7.14 (€8.96) Including VAT at 17.5% Ex-VAT Price: £6.08 (€7.63)

Product: 3" Wall Bracket for 2" Mast - BE713/06

	A bracket of welded construction suitable for light aerials and short stand-off of 3" mast to wall clearance. Price: £7.95 (€9.97) Including VAT at 17.5% Ex-VAT Price: £6.77 (€8.49)

Product: 2" Wall Bracket - BE715/02

This bracket will accept a 2" tube. This bracket can also be used on a 2" pole by use of a second pair of BE915 'V' bolts.

Add BE915 Bolts Stainless Steel - £3.24 inc VAT each

People who bought this item also bought:

1. MyDEL BS1100 Cable Kits

2. MyDEL AS1105

3. MyDEL BS1100

Price: £22.27 (€27.94) Including VAT at 17.5%
Ex-VAT Price: £18.95 (€23.77)

Product: 6" Wall Bracket - BE715/06

This bracket will accept a 2" tube. This bracket can also be used on a 2" pole by use of a second pair of BE915 'V' bolts.

People who bought this item also bought:

1. 2" 'V' Bolt x M10 x 70mm Stainless Steel - BE915SS

2. 4 Way Guy Clamp (With Eyes) Single Section - BE614/A

3. 2" Mast to Winch Bracket - BE255

Price: £23.49 (€29.47) Including VAT at 17.5%
Ex-VAT Price: £19.99 (€25.08)

Product: 9" Wall Bracket - BE715/09

This bracket will accept a 2" tube. This bracket can also be used on a 2" pole by use of a second pair of BE915 'V' bolts.

People who bought this item also bought:

1. 2" 'V' Bolt x 3/8" W x 3.5" - BE915

2. Snap Hook 8 x 80mm - BE923/80

3. Alpha Delta CIN

Price: £24.58 (€30.84) Including VAT at 17.5%
Ex-VAT Price: £20.92 (€26.24)

Product: 12" Wall Bracket - BE715/12

	This bracket will accept a 2" tube. This bracket can also be used on a 2" pole by use of a second pair of BE915 'V' bolts. Price: £25.44 (€31.92) Including VAT at 17.5% Ex-VAT Price: £21.65 (€27.16)

Product: Cable Stand - Off Bracket - BE502

The main requirement for this stand-off bracket is to clear cables around rotators. Another use is on telescopic masts which have a requirement to stand-off the cables clear of the tower.

People who bought this item also bought:

1. Base Tilt Support - BE201

2. Gable End Bracket with 2.25" Clearance - BE303

Price: £9.68 (€12.14) Including VAT at 17.5%
Ex-VAT Price: £8.24 (€10.34)

This website is best viewed in Internet Explorer 7, you are able to download it here. Best viewed in 800x600 or above screen resolution.
Terms & Conditions | Privacy Statement | Online Security | Site Map | Contact

We Accept These Credit Cards
Shopping online at ML&S is safe & secure. More info

Martin Lynch & Sons Ltd . Outline House . 73 Guildford Street . Chertsey . Surrey . KT16 9AS
Opening Hours: Monday to Friday - 9:00 to 5:30, Saturday - 9:30 to 5:00 Tel: +44 (0)845 2300 599 Fax: +44 (0) 1932 567 222 Email: