RF Systems Accessories

ML&S Store ¦ Accessories (By Manufacturer) ¦ RF Systems Accessories


Product:  RF Systems SP-3
E-mail Friend Print Product 

The SP – 3 splitter makes it possible to connect two receivers simultaneously to one wideband- or VHF-UHF output of an indoorunit. Both receivers operate if they are connected to their own antenna.

The high isolation of this splitter assures that both receivers are completely separated: there is no mutual influence such as signal loss or birdies generated from one receiver into the other. The frequency range of the SP – 3 covers 10 MHz – 2500 MHz

Price (Inc VAT at 20%):  £93.86
Ex-VAT Price:  £78.21
 

Product:  RF Systems DX-500/2
E-mail Friend Print Product 

A shortwave receiver together with a scanner

Most wideband scanners give good reception at VHF-UHF frequencies, but at the shortwave bands performance is often less satisfactory.

Price TBA

 

Product:  RF Systems DX-500/3
E-mail Friend Print Product 

Separate outputs for long-wave, medium- and shortwave and VHF-UHF

The DX 500/3 indoorunit is developed for applications whereby several receivers for different frequency bands are in use, for instance on yachts.

Price TBA

 

Product:  RF Systems DX-500/AMP
E-mail Friend Print Product 

The DX 500 antenna comes with 12 mtrs high-grade Mil-Spec coaxial antenna cable. For most applications this length is sufficient.

As it is highly recommended to place the antenna out of the interference field which surrounds every house, 12 mtrs can be sometimes too short and the antenna cable must be extended.

Price TBA

 

Product:  RF Systems DX-500/ATT
E-mail Friend Print Product 

In-line duplexer/attenuator for the output level adjustment of signals in the 30 kHz – 32 MHz frequency range, without influencing the signals in the 32 MHz – 550 MHz frequency range.

The module isinserted in the coaxial cable coming from the antenna. Power supply not required. The DX 500/ATT can be used with all indoor units.

Price TBA