DX Engineering Antenna Accessories

http://www.hamradio.co.uk/
DX Engineering Antenna Accessories
Results : 1 - 45 of 45 |Show
Sort by :
Page of 1
DX Engineering Maxi-Core® High-Power Transmission Line Transformers and Baluns DXE-BAL200H11CT

 Manufacturer's Part Number:DXE-BAL200H11CT  DXE Part Number:DXE-BAL200H11CT Frequency Range:1.8-30 MHz R...

£219.95(Inc VAT at 20%)
DX Engineering Plug-in Modules DXE-RG5000HD-PM

Manufacturer's Part Number:DXE-RG5000HD-PMPart Type:HF Receive Antenna System DevicesProduct Line:DX Engineering Plug-in ModulesDX...

£64.95(Inc VAT at 20%)
DXE-NCC-2 Receive Antenna Phasing System

Receive Antenna Phasing Controller, Enhanced Controls, RTR + Module Slots, Uses+Bias-T 12 to 21 Vdc, 2A, EachImagine adjusting the...

£789.95(Inc VAT at 20%)
DXE-363-SST

This hi-quality bulkhead connector uses silver plated outer and inner conductors and a Teflon insulator. The connector has very lo...

£9.98(Inc VAT at 20%)
DXE-AOK-17M
(2 reviews)

The DX Engineering DXE-AOK-17M kit adds 17 meter coverage to the Hustler BTV series of vertical antennas without giving up any exi...

£119.94(Inc VAT at 20%)
DXE-UT-8213 (Coax Cable Stripper)
(1 review)

DXE-UT-8213,UT-8213,UT8213,8213This tool prepares RG-8, RG-213, 9913F7, LMR-400 (not LMR-400UF) and other similar size coax cable ...

£54.95(Inc VAT at 20%)
DXE-AOK-DCF

The DXE-AOK-DCF Direct Coax Feed assembly by DX Engineering for the Hustler BTV series antennas allows direct connection from a co...

£35.95(Inc VAT at 20%)
DXE-UT-80N (Connector Assembly Tool)

This assembly tool* allows simple threading of the two-piece Type N connector sleeve onto the vinyl jacket of RG-8/U, RG-213/U, LM...

£24.95(Inc VAT at 20%)
DXE-UT-80P (Connector Assembly Tool)

DXE-UT-80P,UT-80P,UT80P,80POriginally introdruced as the DXE-UT-80TN at Hamvention® 2008, this assembly tool allows simple threadi...

£26.51(Inc VAT at 20%)
DXE-BAL050-H10-A

DX Engineering High Power Transmission Line Transformers and Baluns with Maxi-CoreTM Technology, allows your antenna perform to it...

£149.95(Inc VAT at 20%)
DXE-BAL050-H10-AT

DX Engineering High Power Transmission Line Transformers and Baluns with Maxi-CoreTM Technology, allows your antenna perform to it...

£154.95(Inc VAT at 20%)
DXE-BAL050-H11-CT

DX Engineering High Power Transmission Line Transformers and Baluns with Maxi-CoreTM Technology, allows your antenna perform to it...

£215.00(Inc VAT at 20%)
DXE-BAL200-H10-AT

DX Engineering High Power Transmission Line Transformers and Baluns with Maxi-CoreTM Technology, allows your antenna perform to it...

£129.95(Inc VAT at 20%)
DXE-BAL200-H10-CT

DX Engineering High Power Transmission Line Transformers and Baluns with Maxi-CoreTM Technology, allows your antenna perform to it...

£215.00(Inc VAT at 20%)
DXE-BDAB-1P

THIS IS NO LONGER AVAILABLE                   This mounting kit allows you to mount a...

£27.98(Inc VAT at 20%)
DXE-BMB-2P

This handy Aluminum mounting bar and Stainless Steel hardware kit will allow you to mount your quality DX Engineering Balun, Feed ...

£22.95(Inc VAT at 20%)
DXE-CAVS-11P

This V-Clamp is made in one size that fits tubing from 1/2 to 1-3/4'' O.D. as used in antenna construction. The supplied V-bolt is...

£14.99(Inc VAT at 20%)
DXE-CSB-COMBO

Ferrite Beads in a Split Carrier, Combo Pack - Assorted Pack of 8. - Reduce or eliminate ignition/injector noise - 3 S-units impro...

£53.71(Inc VAT at 20%)
DXE-EGK-200

The DX Engineering DXE-EGK-200 is a 2" Grounding Exhaust Kit.

£19.27(Inc VAT at 20%)
DXE-FCC050-H05-A

The DXE-FCC050-H05-A Feedline Current Choke, using Maxi-Core® technology, prevents unwanted RFI by eliminating feedline curren...

£119.94(Inc VAT at 20%)
DXE-HR-1P

The DX Engineering Hot Rodz™ is an adjustable capacity hat system that increases the efficiency and gain of single-band vert...

£129.95(Inc VAT at 20%)
DXE-MM-1

The MM-1 is a dual ratio UN-UN (unbalanced to unbalanced transformer). Great for coupling your 50 Ohm coax to an antenna with a fe...

£114.95(Inc VAT at 20%)
DXE-RADP-1HWK

Additional 20 Sets of ALL Stainless Steel Radial Hardware for use with the DX Engineering Stainless Steel Radial Plate.(20) 1/4'' ...

£9.95(Inc VAT at 20%)
DXE-RADP-3

The DXE-RADP-3 is a Plate, Stainless Steel w/ 20 Sets of SS Radial Attachment Hardware.The DX Engineering Radial Plate is meant fo...

£59.99(Inc VAT at 20%)
DXE-RADW-500KBD

To achieve optimal performance with a ground-mounted vertical, install as many radials as possible. This bulk radial wire kit uses...

£144.95(Inc VAT at 20%)
DXE-RR8-HP-P1

The DXE-RR8-HP is the smallest antenna switch in the DX Engineering RR8 series. It is designed to switch up to 8 coaxial lines in ...

£469.94(Inc VAT at 20%)
DXE-SAD-200A

These Saddle Clamps are made in sizes that fit thick wall tubing, used in antenna construction not like clamps found at your typic...

£12.98(Inc VAT at 20%)
DXE-STPL-100BD

DX Engineering DXE-STPL-100BD is a 100-pack of 3" biodegradable anchors that are produced from recycled PLA (Polylactide Resi...

£16.68(Inc VAT at 20%)
DXE-TB-3P

The DX Engineering DXE-TB-3P is a Tilt Base Kit for 1/4 wave Hustler 4, 5 & 6 BTV Verticals.With a DX Engineering Tilt Base, o...

£79.94(Inc VAT at 20%)
DXE-VFCC-H05-A

The DX Engineering DXE-VFCC-H05-A is a 2/5 kW Vertical Feedline Current Choke.If your antenna SWR is already low and you wish to r...

£169.95(Inc VAT at 20%)
DXE-CAVS-2P

Saddle Clamp, 1 in.-2 in. V-Bolt, 5/16-18 in. Thread, Stainless Steel/Aluminum, Natural, Each

£19.72(Inc VAT at 20%)
DXE-AOK-12M
(2 reviews)

12 Meter Add-On Kit, for Hustler BTV series HF verticals, Kit

£69.95(Inc VAT at 20%)
DXE-BAL050-H05-A - High-Power Transmission Line Transformers and Baluns

Balun, Maxi-Core, 1:1 Ratio, 1.8-30 MHz, 50 ohms, Top, Aluminum Enclosure

£92.95(Inc VAT at 20%)
DXE-170M - DX Engineering Precision Shear Side Cutters

DX Engineering Precision Shear Side Cutters DXE-170MDX Engineering Precision Shear Side Cutters are the perfect tools for trimmin...

£16.79(Inc VAT at 20%)
Cable Cutting Pliers  - CNL-911

Pliers, Cable Cutting, High Carbon Steel, 9.50 in. Overall Length, 1.40 in. Jaw Length, Eachcoax cable cutters are the difference ...

£0.00(Inc VAT at 20%)
DXE-CPC-375  DX Engineering Cushioned P-Clamps

P-Clamps, Cushioned, Aluminum, Neoprene, 3/8 in. Size, for Use with RG-213, RG-8, RG-11 Cable, Set of 10DX Engineering Cushioned P...

£0.00(Inc VAT at 20%)
Radial Wire Metal Anchor Pins - 100 units pack

DX Engineering radial wire metal anchor pins are perfect for fastening radials below the grass line to eliminate the risk of dama...

£19.95(Inc VAT at 20%)
DXE-NCC-1 RECEIVE ANTENNA PHASING CONTROLLER

Receive Antenna Variable Phasing Controller, 0.3-30 MHzDX Engineering NCC-1 Receive Antenna Variable Phasing Controllers are desig...

£589.95(Inc VAT at 20%)
DXE-GUY100-KIT

 Vertical Antenna Guy Kit

£29.95(Inc VAT at 20%)
DX Engineering Tilt Base Antenna Mounting Systems DXE-TB-4P

DX Engineering Tilt Base Antenna Mounting Systems DXE-TB-4PTilt Base Mount Plate, Stainless Steel, w/Tilt Plate for Ant Mast, Req....

£129.95(Inc VAT at 20%)
DXESSVC2P - DX Engineering Saddle Clamps
21%
Off

Brand:DX Engineering Manufacturer's Part Number:DXE-SSVC-2P Part Type:Saddle Clamps Product Line:DX Engineering Sad...

£19.72(Inc VAT at 20%)
DX Engineering Coax Cable Stripping Tools DXE-UT-808X

Coax Cable Stripping Tool for Solder Connectors Only, for RG-8X, 9258, Mini-8, Tool Steel Blades, EachStrips Cable TypeBelden 9258...

£46.96(Inc VAT at 20%)
DX Engineering RPA-1 Receive Preamplifiers DXE-RPA-1

DX Engineering RPA-1 Receive Preamplifiers are the best low noise, receive preamps available--period. RPA-1 Receive Preamplifiers ...

£179.95(Inc VAT at 20%)
DXE-AOK-60M
22%
Off

DX Engineering 60 Meter Add-On Kits add 60-meter coverage to the Hustler BTV series of vertical antennas without giving up any exi...

£69.95(Inc VAT at 20%)
Results : 1 - 45 of 45 |Show
Sort by :
Page of 1
Yaesu
Icom