DX Engineering Antenna Accessories

http://www.hamradio.co.uk/
DX Engineering Antenna Accessories
Results : 1 - 22 of 22 |Show
Sort by :
Page of 1
DXE-AOK-17M
(2 reviews)

The DX Engineering DXE-AOK-17M kit adds 17 meter coverage to the Hustler BTV series of vertical antennas without giving up any exi...

£119.94(Inc VAT at 20%)
DXE-UT-8213 (Coax Cable Stripper)
(1 review)

DXE-UT-8213,UT-8213,UT8213,8213This tool prepares RG-8, RG-213, 9913F7, LMR-400 (not LMR-400UF) and other similar size coax cable ...

£54.95(Inc VAT at 20%)
DXE-AOK-DCF

The DXE-AOK-DCF Direct Coax Feed assembly by DX Engineering for the Hustler BTV series antennas allows direct connection from a co...

£35.95(Inc VAT at 20%)
DXE-UT-80P (Connector Assembly Tool)

DXE-UT-80P,UT-80P,UT80P,80POriginally introdruced as the DXE-UT-80TN at Hamvention® 2008, this assembly tool allows simple threadi...

£26.51(Inc VAT at 20%)
DXE-BAL050-H10-A

DX Engineering High Power Transmission Line Transformers and Baluns with Maxi-CoreTM Technology, allows your antenna perform to it...

£149.95(Inc VAT at 20%)
DXE-BAL050-H10-AT

DX Engineering High Power Transmission Line Transformers and Baluns with Maxi-CoreTM Technology, allows your antenna perform to it...

£154.95(Inc VAT at 20%)
DXE-BAL050-H11-CT

DX Engineering High Power Transmission Line Transformers and Baluns with Maxi-CoreTM Technology, allows your antenna perform to it...

£215.00(Inc VAT at 20%)
DXE-BAL200-H10-AT

DX Engineering High Power Transmission Line Transformers and Baluns with Maxi-CoreTM Technology, allows your antenna perform to it...

£129.95(Inc VAT at 20%)
DXE-BAL200-H10-CT

DX Engineering High Power Transmission Line Transformers and Baluns with Maxi-CoreTM Technology, allows your antenna perform to it...

£215.00(Inc VAT at 20%)
DXE-BDAB-1P

THIS IS NO LONGER AVAILABLE                   This mounting kit allows you to mount a...

£27.98(Inc VAT at 20%)
DXE-BMB-2P

This handy Aluminum mounting bar and Stainless Steel hardware kit will allow you to mount your quality DX Engineering Balun, Feed ...

£22.95(Inc VAT at 20%)
DXE-CAVS-11P

This V-Clamp is made in one size that fits tubing from 1/2 to 1-3/4'' O.D. as used in antenna construction. The supplied V-bolt is...

£14.99(Inc VAT at 20%)
DXE-CSB-COMBO

Ferrite Beads in a Split Carrier, Combo Pack - Assorted Pack of 8. - Reduce or eliminate ignition/injector noise - 3 S-units impro...

£53.71(Inc VAT at 20%)
DXE-EGK-200

The DX Engineering DXE-EGK-200 is a 2" Grounding Exhaust Kit.

£19.27(Inc VAT at 20%)
DXE-FCC050-H05-A

The DXE-FCC050-H05-A Feedline Current Choke, using Maxi-Core® technology, prevents unwanted RFI by eliminating feedline curren...

£119.94(Inc VAT at 20%)
DXE-HR-1P

The DX Engineering Hot Rodz™ is an adjustable capacity hat system that increases the efficiency and gain of single-band vert...

£129.95(Inc VAT at 20%)
DXE-MM-1

The MM-1 is a dual ratio UN-UN (unbalanced to unbalanced transformer). Great for coupling your 50 Ohm coax to an antenna with a fe...

£114.95(Inc VAT at 20%)
DXE-RADP-3

The DXE-RADP-3 is a Plate, Stainless Steel w/ 20 Sets of SS Radial Attachment Hardware.The DX Engineering Radial Plate is meant fo...

£59.99(Inc VAT at 20%)
DXE-RR8-HP-P1

The DXE-RR8-HP is the smallest antenna switch in the DX Engineering RR8 series. It is designed to switch up to 8 coaxial lines in ...

£469.94(Inc VAT at 20%)
DXE-SAD-200A

These Saddle Clamps are made in sizes that fit thick wall tubing, used in antenna construction not like clamps found at your typic...

£12.98(Inc VAT at 20%)
DXE-TB-3P

The DX Engineering DXE-TB-3P is a Tilt Base Kit for 1/4 wave Hustler 4, 5 & 6 BTV Verticals.With a DX Engineering Tilt Base, o...

£79.94(Inc VAT at 20%)
DXE-VFCC-H05-A

The DX Engineering DXE-VFCC-H05-A is a 2/5 kW Vertical Feedline Current Choke.If your antenna SWR is already low and you wish to r...

£169.95(Inc VAT at 20%)
Results : 1 - 22 of 22 |Show
Sort by :
Page of 1
Yaesu
Icom