Yaesu FT-DX3000 £1254.95 after Cash back!
(9 reviews)Write a review
RRP: £ 2609.94
£1429.95 (Inc. VAT 20.00%)
Ex-VAT Price : £1191.63
Add to cart
Product Information
  • Overview
  • Yaesu FTdx3000
  • Resources
  • Video
  • Customer Reviews

The FT DX 3000 Transceiver is the newest additions to the Yaesu family of fine Amateur Radios, incorporating down conversion and sharp edged crystal roofing filter technology. These features provide outstanding receiver performance which is a handed down heritage of the FT-DX5000. The FTDX3000 transceiver incorporates many other new features in a compact housing using a 3.5" TFT screen for displaying operating frequency, mode and other essential operating information. 

 


 
 


Rugged 100 Watt Output Power


The new FTdx3000 HF+50 MHz 100 Watt Transceiver is another exciting new product that is certain to capture the hearts of determined DXers and Contesters as well as casual operators looking for solid communications. Using the newest down conversion and sharp edged crystal roofing filter technology, this fabulous radio attains outstanding receiver performance inherited from Amateur Radio’s leading HF radio; our proud FTdx5000. The market has been waiting for a reasonably priced transceiver that takes a major performance leap forward – the FTdx3000 is that feature filled compact radio package. 

  • TX Frequency Coverage: 160 - 6 meters
  • RX Frequency Coverage: 30 kHz - 56 MHz
  • Operating Modes: USB, LSB, CW, AM, FM
  • Digital Noise Reduction
  • Large 4.3 inch (dia.) colour TFT display
  • Power Output: 5 to 100 watts HF - 6m
  • IF DSP
  • Built-in Electronic Keyer
  • Built In Antenna Tuner
  • High Speed Spectrum Scope

The Yaesu FTDX3000 transceiver provides ultimate weak signal receiver performance in crowded, strong signal environments. General coverage receive is available from 30 kHz to 56 MHz. Power is adjustable 5 to 100 watts for the amateur bands from 160 to 6 meters. A built-in 4.3-in TFT wide full colour high resolution display provides superior operability and visibility for the FTDX3000D user. A High Speed Spectrum scope located just below the LCD display gives the operator all the information needed to place them at the right place on the band with the right receiver set-up to have a satisfying experience with a casual QSO chat or while digging out a rare desired weak signal contact. Other refinements include: USB interface, 9 MHz IF output, RX-only antenna input, RTTY/PSK encoder/decoder, High speed antenna tuner and a specialized 50 MHz amplifier. 


Read what Mike M0AZE
 said about his recent FTdx3000 purchase from ML&S:

"Dear Martin,
I was made very welcome and 'looked' after in the proper customer service sense on Saturday, never pressured and allowed to explore all of the wonderful delights out on show. I bought a new Yaesu FTDX 3000, initial reaction it has everything I'd hoped for.
A very big thank you has to go to every one there, some I don't know their names, from the coffee maker to Tony who spent time on the phone with me on Friday to Steve the technical man (star of YouTube and looks better in the flesh) to Richard your Sales Manager.  The 270 mile round trip was worth it, even the M25 was a doddle both ways.
Congratulations on a super new store and I wish you and everyone at ML&S all the best and continued success.   
Kindest regards,
Mike - M0AZE, March 2015"


Read what David G7LJV said about his recent FTdx3000 purchase from ML&S:

"Richard,

Many thanks for your advice, assistance and patience in helping me (finally) choose the right radio!

Unsurprisingly, the FTDX-3000 is absolutely superb and in performance terms is significantly better than any radio I have previously owned.  It is also remarkably logical and easy to operate, although I have yet to absorb every page of the weighty user's manual!

Whilst I never thought I would spend so much on a transceiver (parsimonious is my middle name), the Yaesu is worth every penny (even if the price reported to my wife had the decimal point moved one place to the left).

Finally, in this age of disposable consumerism, it is refreshing and reassuring to receive such excellent customer service - thanks Richard!

Kind regards,

David - G7LJV, April 2013"
 

Read the review at EHAM.NET click 
HERE



FT DX 3000 Brief Description:

The Amazing Crystal Roofing Filter performance has been proven in the FT DX 5000

The Down conversion 9 MHz 1st IF frequency receiver construction can realise narrow 300 Hz (optional), 600 Hz and 3 kHz bandwidth roofing filters.

Implementing the extra sharp Crystal Roofing Filters provides superior close-in dynamic range and affords the best receiver performance possible.

Outstanding Receiver performance is the heritage of the FT DX 5000
The Essential elements in receiver performance are the RF amplifier and the 1st mixer.
The RF Amplifier has optimized NF points, and the over-sized wide range RF transformer exhibits minimum saturation in strong signal processing. The optimized devices were selected to guarantee superior multi-signal RX performance.
The desired maximum performance has been realized in the development of the FT DX 3000 receiver circuitry. This new radio has the high dynamic rance IP3 performance that was realized and proven in the FT DX 5000.

IF DSP provides effective and optimized QRM rejection
The 32 bit high speed floating decimal DSP (max 2800 MIPS) provides effective cancellation/reduction (DNR) of the random noise that is frequently found on the HF Frequencies.
Auto-Notch (DNF) that automatically eliminates the dominant beat tone
CONTOUR and APF; very effective receiver noise reduction tools in the HF band operations.
Yaesu original DSP QRM and noise reduction are also provided with the new FT DX 3000.

Large and Wide Colour LCD Display
The high-resolution (480 x 272 dots) 3.5-inch wide colour LCD displays the operating information and the status of the transceiver functions.
The various FT DX 3000 functions are displayed on this LCD and provide the operator with easy to read operating information.

High Speed Spectrum Scope built-in
Although the FT DX 3000 only has one receiver, a high speed Spectrum Scope is built into the radio.
When in Auto Mode, the Spectrum Scope display is updated in real time.
The maximum bandwidth of the scope is 1 MHz, and the minimum span width setting is 20 kHz. The best desired span is selectable for the high-resolution display. The current band activity can be monitored in real time.

AF SCOPE display and RTTY/PSK encoder/decoder (optional)
The optional AF SCOPE and optional RTTY encoder/decoder functions have been developed for the FT DX 3000.
The wave form of the AF SCOPE signal can be displayed on the TFT LCD. Also, the RTTY/PSK text may be displayed on the LCD.


Independent Frequency Display
The Main operating frequency is the most important display in the radio, with VFO-A frequency located just above the main dial.
The newly-developed LCD has a wider viewing angle and higher contrast for convenient and effortless viewing.

Other Features:

  • Built-In Specialised Receiver amplifier for 50 MHZ
  • Three antenna connectors are provided, with the possibility of assigning the "ANT-3" connector to "RX-Only"
  • Signal output for an external receiver
  • 9 MHz IF output
  • High Speed Automatic antenna tuner built-in
  • Optional µ-tune unit available
  • USB Interface

 

The FTDX3000 requires 13.8 VDC at 23 amps. This radio comes with the MH-31B8 hand mic, DC cable spare fuses and plugs. 14.4 x 4.5 x 12.4 inches 22 lbs. (10 kg).




 

The new Yaesu FTdx3000 HF/6m Base 

Now available to view & buy at our Staines Showroom.

The new FTdx3000 HF+50 MHz 100 Watt Transceiver is another exciting new product that is certain to capture the hearts of determined DXers and Contesters as well as casual operators looking for solid communications. Using the newest down conversion and sharp edged crystal roofing filter technology, this fabulous radio attains outstanding receiver performance inherited from Amateur Radio’s leading HF radio; our proud FTdx5000. The market has been waiting for a reasonably priced transceiver that takes a major performance leap forward – the FTdx3000 is that feature filled compact radio package.

  • TX Frequency Coverage: 160 - 6 meters
  • RX Frequency Coverage: 30 kHz - 56 MHz
  • Operating Modes: USB, LSB, CW, AM, FM
  • Digital Noise Reduction
  • Large 4.3 inch (dia.) colour TFT display
  • Power Output: 5 to 100 watts HF - 6m
  • IF DSP
  • Built-in Electronic Keyer
  • Built In Antenna Tuner
  • High Speed Spectrum Scope

The Yaesu FTDX3000 transceiver provides ultimate weak signal receiver performance in crowded, strong signal environments. General coverage receive is available from 30 kHz to 56 MHz. Power is adjustable 5 to 100 watts for the amateur bands from 160 to 6 meters. A built-in 4.3-in TFT wide full colour high resolution display provides superior operability and visibility for the FTDX3000D user. A High Speed Spectrum scope located just below the LCD display gives the operator all the information needed to place them at the right place on the band with the right receiver set-up to have a satisfying experience with a casual QSO chat or while digging out a rare desired weak signal contact. Other refinements include: USB interface, 9 MHz IF output, RX-only antenna input, RTTY/PSK encoder/decoder, High speed antenna tuner and a specialized 50 MHz amplifier.


FT DX 3000 Brief Description

Rugged 100 Watt Output Power


The Amazing Crystal Roofing Filter performance has been proven in the FT DX 5000

The Down conversion 9 MHz 1st IF frequency receiver construction can realise narrow 300 Hz (optional), 600 Hz and 3 kHz bandwidth roofing filters.


Implementing the extra sharp Crystal Roofing Filters provides superior close-in dynamic range and affords the best receiver performance possible.

Outstanding Receiver performance is the heritage of the FT DX 5000
The Essential elements in receiver performance are the RF amplifier and the 1st mixer.

The RF Amplifier has optimized NF points, and the over-sized wide range RF transformer exhibits minimum saturation in strong signal processing. The optimized devices were selected to guarantee superior multi-signal RX performance.

The desired maximum performance has been realized in the development of the FT DX 3000 receiver circuitry. This new radio has the high dynamic rance IP3 performance that was realized and proven in the FT DX 5000.

IF DSP provides effective and optimized QRM rejection
The 32 bit high speed floating decimal DSP (max 2800 MIPS) provides effective cancellation/reduction (DNR) of the random noise that is frequently found on the HF Frequencies.

Auto-Notch (DNF) that automatically eliminates the dominant beat tone

CONTOUR and APF; very effective receiver noise reduction tools in the HF band operations.

Yaesu original DSP QRM and noise reduction are also provided with the new FT DX 3000.

Large and Wide Colour LCD Display
The high-resolution (480 x 272 dots) 3.5-inch wide colour LCD displays the operating information and the status of the transceiver functions.

The various FT DX 3000 functions are displayed on this LCD and provide the operator with easy to read operating information.

High Speed Spectrum Scope built-in
Although the FT DX 3000 only has one receiver, a high speed Spectrum Scope is built into the radio.

When in Auto Mode, the Spectrum Scope display is updated in real time.

The maximum bandwidth of the scope is 1 MHz, and the minimum span width setting is 20 kHz. The best desired span is selectable for the high-resolution display. The current band activity can be monitored in real time.

AF SCOPE display and RTTY/PSK encoder/decoder (optional)
The optional AF SCOPE and optional RTTY encoder/decoder functions have been developed for the FT DX 3000.

The wave form of the AF SCOPE signal can be displayed on the TFT LCD. Also, the RTTY/PSK text may be displayed on the LCD.


Independent Frequency Display
The Main operating frequency is the most important display in the radio, with VFO-A frequency located just above the main dial.

The newly-developed LCD has a wider viewing angle and higher contrast for convenient and effortless viewing.

Other Features


  • Built-In Specialised Receiver amplifier for 50 MHZ
  • Three antenna connectors are provided, with the possibility of assigning the "ANT-3" connector to "RX-Only"
  • Signal output for an external receiver
  • 9 MHz IF output
  • High Speed Automatic antenna tuner built-in
  • Optional µ-tune unit available
  • USB Interface

 

The FTDX3000 requires 13.8 VDC at 23 amps. This radio comes with the MH-31B8 hand mic, DC cable spare fuses and plugs. 14.4 x 4.5 x 12.4 inches 22 lbs. (10 kg).

Download here the Leaflet

Download here the Operating Manual
(9 reviews)Write a review
FTdx3000
Preben|21-11-2016
Just purchased the FTdx3000 to replace my old FT950 and what a difference. Not that the 950 was bad but the FTdx3000 is just amassing. Connecting 3 antennas and still have RX Out for my SDRplay RSP makes for a formidable combo. Noise levels has gone down on all bands and the display/menu structure makes for easy management. CAT control is just as easy as anything. Had the FTdx3000 for only 2 days but already a very positive addition to the shack.
Excellent Radio
Kevin|16-11-2016
after owning this radio for a few years now I can honesty say this is a radio with a brilliant receiver the noise reduction combined with contour brings out weak signals like they are in the same room, I cannot find fault with this radio other than the fact I should have purchased it long before I did this combined with my Heil PR-781 and innovantennas xr6c yagi have enable me to get past the 100 countries worked mark very happy ML & S customer de G0UDG
Still Brill
Mike|27-08-2016
I have owned many radios - many more than once (probably bought Mr Lynch a car over the years, or a pushbike at least!) so have lots of experience of radios to form the basis of what is good and bad when it comes to HF Transceivers. I have recently gone back to the FTDX-3000. What a receiver! Its so close to the FTDX-5000 - for the casual op, there's no difference. With most radios on the market having excellent specs nowadays what sets the 3000 apart? Its the warm, rich audio - even from the internal speaker and the DSP that pushes the noise and dirt down, and brings the otherwise hard to hear stations up that puts it up there as one of the greats. I toyed with trying an FTDX-1200 but the 300Hz roofing filter and general selectivity numbers made me go for another FTDX-3000. I promise to keep this one - at least for a month!
Mr
Paul|09-12-2015
De G4AZC I have held a callsign and been professionally involved with Marine and Amateur radio for over 40 years. I would not have belived it possible for a radio to be as good as this. Faultless in every respect, Put the DNR on and 7MHz WAB sounds like FM, just like 30 years ago before Mf and HF noise levels rose to S9. 5W on topband gives S9+ reports all the time. Superb audio reports. Unbelievably good radio. Well built and ergonomially superb. No I am not being paid to write this, just very very impressed ....................................................
David GM0RTY
David|15-05-2015
Having owned an FT950 for some time and with very noisy HF ,I was looking for something ' a bit special' to try an eliminate some of this noise and to upgrade to a suitable rig, a swift phone call to Martin Lynch put me right and I purchased an FT3000 and never looked back, what a rig!! has surpassed ALL my expectations WELL DONE Martin Lynch!! (again)
Fantastic
Richard|26-09-2014
Purchased my 3000 from Lynch's back in March. Fantastic service, delivered next day and blown away by the radio. First class as always from ML&S. Thanks.
FTDX3000D
Kevin|15-07-2014
Highly Recommended I Purchased this radio only a few weeks ago to replace my Ft900at, and have to say its the best purchase I have made in a long time well done on the excellent service and quick delivery time. The transceiver is excellent on receive and I have been getting great audio reports despite only using the default microphone that came with the radio worth every penny paid
FTDX 3000 D
David.A.R.|25-04-2014
FT 920, FT 950, ? , = FTDX 3000 D. Looked at numerous mid range TXVR's. Kept returning to the 3000. After much research, talking to owners, and Yaesu's cash back offer, I bought one. Had it three weeks now, and thrilled, to say the least. Good layout, quiet receiver, very good filtering, easy to operate. Use a Heil PR 781 with it, now got the EQ, Gain, and processer, set up for DX, and the comments are most pleasing. The only feature I would not miss, is the scope, I now use waterfall, which is quite good. This is a 6/5 rig ! David. SM7JKD, G4HUT.
FTDx3000
George|02-03-2013
I purchased my FTdx3000 from ML&S in January. 2013 This transceiver is a gem it is very versitile come with good spec, its performance is all that a discerning amateur would wish for at a realistic price. the menu system is very easy to use, the large display panel is excellent, the scope is a very useful feature useful when searching for free frequencies on some of the congested bands, the DNR is again a feature that works well, handbook is very comprehensive and easy to use. All in all a very good piece of kit. I upgraded from FT950 which was in its self excellent, but in my opinion if you can afford that little extra cash go for it. Martyn Lynch Ltd are to be recommended for their professional customer service. George G0CMF
Accessories
Recently Viewed
If you’d like us to let you know as soon as this product comes back into stock, please enter your email address and mobile number below.
Yaesu
Icom