radio user
DJI
Radio user yaesu icomMy Short List (0) Items
0 items
 
RRP: £ 1999.94
Price : £1499.95 (Inc VAT at 20.00%)
Ex-VAT Price : Price : £1249.96
 
Add to cart
Product Accessories
 
 MyDEL MP-304mkII PSU - £99.95
 RadioSport RS60CF Kit For Icom IC-7410 - £249.90
Icom proudly announces the debut of the new HF/50MHz transceiver IC-7410. The IC-7410 has been designed as an HF/50MHz specialized rig with excellent performance and features in this category. The IC-7410 employs high grade DSP unit and double conversion super-heterodyne system developed from the latest technology used in our higher grade rigs such as the IC-7800/7700/7600 series. In addition, the IC-7410 comes with a built-in 15kHz 1st IF filter and can accept up to two optional filters (3kHz/6kHz). When used with these 1st IF filters, narrow mode signals such as the CW and SSB modes are protected from adjacent strong signals.

CLICK HERE FOR FIRMWARE UPDATE


       

Major features

  • +30dBm 3rd order intercept point (in 14MHz band)
  • Double conversion superheterodyne system improves inband IMD characteristics
  • 32-bit floating point DSP unit
  • Built-in 15kHz first IF filter and optional 3kHz and 6kHz first IF filters
  • Large monochrome LCD display
  • ±0.5ppm frequency stability
  • Built-in simple band scope
  • Built-in automatic antenna tuner
  • All mode (SSB/CW/RTTY/AM/FM)
  • Optional RS-BA1 for IP remote control

dsp unitFaster DSP unit and in-house DSP expertise

The IC-7410 employs a much higher speed DSP unit compared to the IC-746PRO/7400's DSP unit. The AD/DA converter AK4620B allows for a high dynamic range and superior S/N ratio.

Icom has many years of DSP expertise, and has been key in development of the technology. The IC-7410 represents the latest in digital achievement and performance.

dsp unit and ad/da converter

double-conversion superheterodyne

Double-conversion superheterodyne

The IC-7410 employs a double conversion superheterodyne system which has an image rejection mixer for the 2nd mixer stage. When compared to a typical triple-conversion system, signal distortion is dramactically reduced.


 

+30dBm third-order intercept point (IP3)

third-order intercept pointIcom's analog RF circuit experience  combined with the latest DSP software technology results in +30dBm IP3 equivalent to the IC-7600. Even in tough RF conditions, such as interference by broadcast stations or strong neighboring ham stations, a weak signal can be clearly received by the IC-7410.

Three first IF filters (3/6/15kHz)*

The IC-7410 comes with a built-in 15kHz 1st IF filter and can accept up to two optional filters (3kHz FL-431 and 6kHz FL-430). By changing the first if filterIF filter width according to the operating mode, the desired signal is protected from the influence of nearby strong stations. The 3kHz first IF filter is especially effective in the CW and SSB modes. (Fixed for 15kHz in FM mode.)
* in 14MHz

High frequency stability

A high stability TCXO crystal oscillator provides ±0.5ppm of high frequency stability over a wide temperature range (0°C to +50°C). This allows for a long stable operating time in modes such as RTTY.

Large, multi-function LCD

multi-function lcdThe display increases in width from the IC-746PRO/7400. The large multi-function LCD shows frequency, 9-character channel name, channel number, multi functional meter (includes S-meter, RF output, SWR and ALC level). The dot-matrix portion of the LCD shows the following items:

  • Channel name
  • Band scope
  • Memory keyer contents
  • Function key assignment
  • RTTY decoder screen
  • Graphical SWR scale

Simple band scope

The built-in simple band scope shows the band condition at a glance and is handy for searching for active stations.

RTTY demodulator and decoder

The built-in RTTY demodulator and decoder allows you to instantly read an RTTY message on the display. No external units or PC required. The built-in tuning indicator visually helps in critical tuning.

Ample CW functions

All of the following CW capabilities are included in the IC-7410

  • Large CW PITCH knob and independent BK-IN (break-in) delay knob improve operating efficiency
  • CW wave form controlled by the DSP
  • 4 keyer channels with 70 characters of transmit memory per channel
  • Multi-function electronic keyer with adjustable keying speed from 6-48 wpm, dot-dash ratio from 1:1:2.8 to 1:1:4.5 and paddle polarity
  • Bug keyer and full break-in function
  • Continuously adjustable CW pitch control from 300-900Hz
  • Double key jacks (front and rear panels)
  • CW reverse

Built-in antenna tuner

The internal antenna tuner covers from 1.8MHz to 54MHz and automatically tunes for low SWR. Variable capacitors provide higher accuracy than a typical mechanical relay tuner. Once you transmit on a frequency, the tuner can instantly retune the frequency using its built-in memory.USB connector

USB connector for PC control

The IC-7410 has a standard type B USB connector and can be connected to a PC. Modulation input, audio output, RTTY demodulator output and CI-V command can be controlled via the USB cable. Also, the conventional CI-V remote control jack is built-in to the IC-7410.

Download the USB Driver

large heat sinkLarge heat sink

When compared to the IC-746PRO/7400, the IC-7410's large heat sink improves heat dissipation. Even during long hours of heavy-duty cycle operation, the IC-7410 provides stable output power.

Optional RS-BA1 IP remote control software

The optional RS-BA1 allows you to use the IC-7410 from another room using your home network or even from a remote location over the Internet. Most settings such as filter width, AGC constant, etc., can be controlled from your PC.

RSBA1IP software

Other outstanding features

  • Built-in voice synthesizer announces operating frequency, mode and S-meter level
  • User programmable band edge beep (can be disabled)
  • VSC (Voice Squelch Control) function
  • RF speech compressor
  • Microphone equalizer and adjustable transmit bandwidth
  • Two preamplifier types: Preamp 1: Increases low level signal improving intermodulation characteristics, Preamp 2: High gain preamplifier
  • 20dB built-in attenuator
  • Audio equalizer function
  • CTCSS and DTCS tone encoder and decoder
  • Triple band stacking register
  • Quick split function and frequency lock function
  • RIT and ΔTx variable up to ±9.999kHz
  • SSB/CW synchronous tuning automatically shifts the carrier point when switching between CW and LSB/USB modes
  • 1Hz pitch tuning steps
  • Program scan, memory scan, select memory scan, mode select scan and Δf scan
  • Automatic tuning steps
  • AH-4 control circuit
  • Large independent MIC/RF power and Notch knobs

Rear panel

  1. Tuner Socket
  2. DC Power Socket
  3. Ground Terminal
  4. Antenna Connectors
  5. Key Jack
  6. ALC Input Jack
  7. Send Control Jack
  8. Accessory Socket
  9. CI-V Remote Control Jack
  10. USB Connector
  11. External Speaker Jack

IC7410 back view


General

Frequency coverage:
USA version
Rx
0.030–60.000MHz*

Tx
1.800–1.999MHz 3.500–3.999MHz
5.255–5.405MHz* 7.000–7.300MHz
10.100–10.150MHz 14.000–14.350MHz
18.068–18.168MHz 21.000–21.450MHz
24.890–24.990MHz 28.000–29.700MHz
50.000–54.000MHz
Frequency coverage:
Europe, Europe-01 version
Rx
0.030-60.000MHz*

Tx
1.810–1.999MHz 3.500–3.800MHz
7.000–7.100MHz (Europe)
7.000–7.200MHz (Europe-01)
10.100–10.150MHz 14.000–14.350MHz
18.068–18.168MHz 21.000–21.450MHz
24.890–24.990MHz 28.000–29.700MHz
50.000–52.000MHz
ModeUSB, LSB, CW, RTTY, AM, FM
Number of channels101 (99 regular, 2 scan edges)
Antenna connectorSO-239×2 (50Ω)
Power supply requirement13.8V DC ±15% (negative ground)
Temperature range0°C to 50°C; +32°F to +122°F
Frequency stabilityLess than ±0.5ppm
(0°C to 50°C; +32°F to +122°F)
Dimensions (W×H×D)
(projections not included)
315×116×343 mm;
12.4×4.57×13.5 in
Weight (approx.)10.2kg; 22.4lb
* Some frequency bands are not guaranteed.

Transmitter

Output power
(continuously adjustable)
SSB, CW, RTTY, FM:
2–100W

AM:
2–27W
Modulation systemSSB:
Digital PSN modulation

AM:
Digital low power modulation

FM:
Digital phase modulation
Spurious emissionLess than -50dB (HF bands)
Less than -63dB (50MHz band)
Carrier suppressionMore than 40dB
Unwanted sideband suppressionMore than 55dB
Microphone impedance600Ω (8-pin connector)

Receiver

Receive systemDouble conversion superheterodyne
Intermediate frequencies1st: 64.455MHz
2nd: 36kHz
Sensitivity (typical)SSB/CW: (10dB S/N)
1.8–29.9MHz 0.16μV*1
50–54MHz 0.13μV*2

AM: (10dB S/N)
0.5–1.8MHz 12.6μV*1
1.8–29.9MHz 2.0μV*1
50–54MHz 1.6μV*2

FM: (12dB SINAD)
1.8–29.9MHz 0.5μV*3
50–54MHz 0.32μV*3
Squelch sensitivity
(Pre-amp: ON)
SSB: Less than 5.6μV
FM: Less than 0.3μV
Selectivity (representative value)SSB (BW: 2.4kHz, sharp)
More than 2.4kHz / –6dB
Less than 3.4kHz / –40dB

CW (BW: 500Hz, sharp)
More than 500Hz / –6dB
Less than 700Hz / –40dB

RTTY (BW: 350Hz, sharp)
More than 500Hz / –6dB
Less than 800Hz / –40dB

AM (BW: 6kHz)
More than 6.0kHz / –6dB
Less than 10.0kHz / –40dB

FM (BW: 15kHz)
More than 12.0kHz / –6dB
Less than 22.0kHz / –40dB
Spurious and image rejection ratioMore than 70dB
Audio output power
(at 13.8V DC)
More than 2.0W at 10% distortion with an 8Ω load
RIT variable range±9.999kHz
PHONES connector3-conductor 6.35 (d) mm (1⁄4″)
EXT SP connector2-conductor 3.5 (d) mm (1⁄8″) /8Ω
*1 Pre-amp 1 ON
*2 Pre-amp 2 ON
*3 28–29.7MHz

Antenna tuner

Matching impedance rangeHF bands:
16.7–150Ω unbalanced*1

50MHz band:
20–125Ω unbalanced*2
Minimum operating powerHF bands:
8W

50MHz band:
15W
Tuning accuracyVSWR 1:1.5 or less
(SWR after the motor has stopped)
Insertion loss (after tuning)1.8MHz band:
1.2dB or less

3.5–50MHz bands:
1.0dB or less
*1 Less than VSWR 1:3
*2 Less than VSWR 1:2.5


All stated specifications are subject to change without notice or obligation.
     

Download here the review made by By Adam Farson VA7OJ/AB4OJ
       

Recently Viewed Items

Previous
Icom IC-7410
Icom IC-7410
Rating 0
Price : £1499.95 (Inc VAT at 20.00%)
 
Next
Yaesu
Icom
Search