The Yaesu FTM-350R dual band mobile transceiver operates on 2 meters and 70 centimeters. And that is with a full 50 watts of reliable power on both bands. And even QRP 220 MHz (1 watt) is supported (USA version only).

It has two separate receivers with dual speakers on the rear of the control head. The controls are easy to use. On the left receiver enjoy the AM, FM and stereo FM broadcast bands with extended receive: 0.5-1.7, 76-108, 108-250, 300-1000 MHz (less former cellular frequencies). The right receiver covers 108-250, 300-1000 MHz (less former cellular frequencies).

Enjoy 500 memories with alpha tagging for the left band and 500 for the right band (total 1000) plus 9 DTMF memories. And the FTM-350R menu system is easy to use. There is also stereo line inputs available. This radio has a built-in TNC for APRS® applications. Cross-band repeat is supported. The FTM-350R is ready to accept the optional FGPS-1 internal GPS receiver-antenna. The front panel is easily remoteable with the 10 foot included cable.

A 20 foot remote cable is available optionally. There is a front panel built-in microphone activates PTT transmission. Supplied with: MH-48A6JA DTMF hand mic, Front panel suction type mounting bracket, DC power cable, 10 foot control panel cable, speaker cable, spare fuse and Owner's Manual.

Features:

• High Speed Bandscope
• Optional FGPS-1 Internal GPS Unit
• Optional FGPS-2 External GPS Unit
• Optional FPR-1 Monitor Unit
• 500+500 Alpha Memories
• Bluetooth Ready
• Built in Barometric Pressure Sensor
• Large Dot Matrix Display
• Selectable Eight Color Display
• Extended Receive
• AM & FM, FM Stereo Broadcast Bands
• Easy menu system
• WIRES™ Ready
• 1200/9600 Packet Port [DIN]
• Built-in APRS® TNC
• Remotable Control Head
• Suction Type Control Head Mount
• Line Input Jack on rear panel

Supplied accessories:

The Yaesu FTM-350R rear panel features an data jack, a 3.5mm speaker output jack plus a 3.5mm stereo line input jack!

The Yaesu FTM-350R Control Head features a new suction type mounting system. The back of the control head is shown above with option FGPS-1 unit installed.