All Accessories

https://www.hamradio.co.uk/
All Accessories
Results : 1 - 28 of 28 |Show
Sort by :
Page of 1
DX Engineering 15035 Coax Cable Strippers DXE-15035
17%
Off

Great for everything from RG-58 up to Ultraflex 10!DX Engineering 15035 Coax Cable Strippers are designed for stripping RG-8, RG-2...

£23.95(Inc VAT at 20%)
DXE-AOK-17M
31%
Off
(4 reviews)

DX Engineering's patent pending* 17 Meter Add-On Kits add 17 meter band coverage to the Hustler BTV series vertical antennas witho...

£99.95(Inc VAT at 20%)
DXE-CGB-200

Grounding Clamp Size Range:1.000 in.-2.000 in.   Coaxial Connector Hole Size:0.640 in.   Grounding Bracket M...

£20.40(Inc VAT at 20%)
DXE-UT-8213 (Coax Cable Stripper)
(1 review)

DXE-UT-8213,UT-8213,UT8213,8213This tool prepares RG-8, RG-213, 9913F7, LMR-400 (not LMR-400UF) and other similar size coax cable ...

£76.95(Inc VAT at 20%)
DXE-AOK-DCF

The DXE-AOK-DCF Direct Coax Feed assembly by DX Engineering for the Hustler BTV series antennas allows direct connection from a co...

£35.95(Inc VAT at 20%)
DX Engineering Silver Plated Female Secure Mount Bulkhead Connectors

oaxial Connector Designation:UHF female, SO-239   Coaxial Connector Dielectric Type:PTFE   Hardware Included:Y...

£20.95(Inc VAT at 20%)
DXE-UT-80N (Connector Assembly Tool)

This assembly tool* allows simple threading of the two-piece Type N connector sleeve onto the vinyl jacket of RG-8/U, RG-213/U, LM...

£28.50(Inc VAT at 20%)
DX Engineering FSM HWK

Coaxial Connector Designation:Hardware pack   Hardware Included:Yes   Quantity:Sold as a kit.   Notes...

£6.00(Inc VAT at 20%)
DXE-UT-80P (Connector Assembly Tool)

DXE-UT-80P,UT-80P,UT80P,80POriginally introdruced as the DXE-UT-80TN at Hamvention� 2008, this assembly tool allows simple threa...

£28.50(Inc VAT at 20%)
DXE-GR-5P

Fits Tubing SizeGuy Ring Outer Diameter 0.750 in. 2.500 in. 1.000 in. 2.750 in. 1.250 in. 3.000 in. 1...

£9.95(Inc VAT at 20%)
DXE-BAL050-H10-AT

DX Engineering High Power Transmission Line Transformers and Baluns with Maxi-CoreTM Technology, allows your antenna perform to it...

£139.00(Inc VAT at 20%)
DXE-BAL050-H11-CT

DX Engineering High Power Transmission Line Transformers and Baluns with Maxi-CoreTM Technology, allows your antenna perform to it...

£215.00(Inc VAT at 20%)
DXE-BAL200-H10-AT

DX Engineering High Power Transmission Line Transformers and Baluns with Maxi-CoreTM Technology, allows your antenna perform to it...

£169.95(Inc VAT at 20%)
DXE-BAL200-H10-CT

DX Engineering High Power Transmission Line Transformers and Baluns with Maxi-CoreTM Technology, allows your antenna perform to it...

£215.00(Inc VAT at 20%)
DXE-BDAB-1P

THIS IS NO LONGER AVAILABLE                   This mounting kit allows you to mount a...

£23.32(Inc VAT at 20%)
DXE-BMB-2P

This handy Aluminum mounting bar and Stainless Steel hardware kit will allow you to mount your quality DX Engineering Balun, Feed ...

£25.95(Inc VAT at 20%)
DXE-CAVS-11P

This V-Clamp is made in one size that fits tubing from 1/2 to 1-3/4'' O.D. as used in antenna construction. The supplied V-bolt is...

£14.99(Inc VAT at 20%)
DXE-CSB-COMBO

Ferrite Beads in a Split Carrier, Combo Pack - Assorted Pack of 8. - Reduce or eliminate ignition/injector noise - 3 S-units impro...

£44.76(Inc VAT at 20%)
RG-8 Mini Coax

This product has been surpassed by the Ultraflex 7 - before you make your purchase decision check it out CLICK HERE!

£1.00(Inc VAT at 20%)
DXE-EGK-200

The DX Engineering DXE-EGK-200 is a 2" Grounding Exhaust Kit.

£26.50(Inc VAT at 20%)
DXE-HR-1P

The DX Engineering Hot Rodz™ is an adjustable capacity hat system that increases the efficiency and gain of single-band vert...

£129.95(Inc VAT at 20%)
DXE-MM-1

The MM-1 is a dual ratio UN-UN (unbalanced to unbalanced transformer). Great for coupling your 50 Ohm coax to an antenna with a fe...

£131.50(Inc VAT at 20%)
DXE-SAD-200A

These Saddle Clamps are made in sizes that fit thick wall tubing, used in antenna construction not like clamps found at your typic...

£10.82(Inc VAT at 20%)
25 A Twin Core DC Lead

Heavy duty twin core 25 amp DC lead (Red/Black). Core: 79/0.2mm.Price per metre

£0.79(Inc VAT at 20%)
40 A Twin Core DC Lead

Heavy duty twin core 40 amp DC lead (Red/Black). Core: 130/0.2mm.  Price per metre

£1.63(Inc VAT at 20%)
DXE-TB-3P

The DX Engineering DXE-TB-3P is a Tilt Base Kit for 1/4 wave Hustler 4, 5 & 6 BTV Verticals.With a DX Engineering Tilt Base, o...

£67.95(Inc VAT at 20%)
DXE-UT-RB-HD Spare Blades

Blades, Tool Steel, Replacement for DX Engineering UT-series Coaxial Cable Prep Tools , Pair

£20.86(Inc VAT at 20%)
DX Engineering Hot Rodz™ Antenna Capacity Hats DXE-HR-1P

DX Engineering Hot Rodz™ Antenna Capacity Hat systems are designed to increase the efficiency and gain of single-band mobile...

£129.95(Inc VAT at 20%)
Results : 1 - 28 of 28 |Show
Sort by :
Page of 1
Yaesu
Icom