Your Cart is Ready to checkout

Rig Expert AA-1000

Rig Expert AA-1000
Part Number: AA-1000
RRP: £ 947.94
£649.95 ( £541.63 EXC. VAT )
ESTIMATED SHIPPING COST:
£11.95
Pre-Order. Click to notify me
Shipping to:
Add to cart
Call Now
Product Information
  • Overview

The RigExpert AA-1000 is a powerful antenna analyzer designed for testing, checking, tuning or repairing antennas and antenna feedlines.

Graphical SWR (Standing Wave Ratio) and impedance, as well as Smith/polar chart displays are key features of these analyzers which significantly reduce the time required to adjust an antenna.

Easy-to use measurement modes, as well as additional features such as connection to a personal computer make RigExpert AA-600, AA-1000 and AA-1400 attractive for professionals and hobbyists.

AA-600, AA-1000 and AA-1400 are available in non-US version (with ability to display Smith chart) and US version (displaying a polar chart instead).

The following tasks are easily accomplished by using these analyzers:

  • Rapid check-out of an antenna
  • Tuning an antenna to resonance
  • Antenna SWR and impedance measurement and comparison before and after specific event (rain, hurricane, etc.)
  • Making coaxial lines or measuring their parameters
  • Cable testing and fault location
  • Measuring capacitance or inductance of reactive loads

See also: A short review of antenna and network analyzers
See also: AA-1000: measurements at higher frequencies

See also: rigexpert-analyzers – RigExpert antenna and network analyzer user’s group at Yahoo

See also: A short presentation of RigExpert Antenna Analyzers on YouTube.

RigExpert AA-1000 – Specifications

 

Frequency range: 0.1 to 1000 MHz – AA-1000

 

Frequency entry: 1 kHz resolution

 

Measurement for 25, 50, 75 and 100-Ohm systems

 

SWR measurement range: 1 to 100 in numerical mode,
1 to 10 in graph mode

 

SWR display: numerical or easily-readable bar

 

R and X range: 0…10000, -10000…10000 in numerical mode,
0…1000, -1000…1000 in graph mode

 

Display modes:
–    SWR at single or multiple frequencies
–    SWR, return loss, R, X, Z, L, C at single frequency
–    SWR graph, 80 points
–    R, X graph, 80 points
–    Smith (or polar) chart, 80 points
–    TDR (Time Domain Reflectometer) graph

 

Optional open-short-load calibration in SWR, R,X or Smith/polar chart graph modes.

 

RF output:
–    Connector type: N
–    Output signal shape: square, 0.1 to 200 MHz. For higher frequencies, harmonics of the main signal are used.
–    Output power: -10 dBm (at 50 Ohm load)

 

Power:
–    Three 1.2V, 1800…3000 mAh, Ni-MH batteries, type AA
–    Max. 3 hours of continuous measurement, max. 2 days in stand-by mode when fully charged batteries are used
–    When the analyzer is connected to a PC or a DC adapter with USB socket, it takes power from these sources

 

Interface:
–    320×240 color TFT displaty
–    6×3 keys on the water-proof keypad
–    Multilingual menus and help screens
–    USB connection to a personal computer

 

Dimensions: 23x10x5.5 cm (9x4x2”)

 

Operating temperature: 0…40 °C (32…104 °F)

 

Weight: 650g (23 Oz)

 

Warranty: 2 years

 

GTIN-13: 4820185420044

 

RigExpert AA-1000 is made in Ukraine.

 

Specifications are subject to change without notice.

 

Recently Viewed
If you’d like us to let you know as soon as this product comes back into stock, please enter your email address and mobile number below.
Yaesu
Icom