Mast Clamps
Special offers
 |
A lightweight medium duty swaged pole with a unique push fitting allowing for more than one to be added together - price for singl...
£22.05(Inc VAT at 20%)
 |
2 X 2.5 CROSSOVER PLATE
£15.83(Inc VAT at 20%)
 |
A range of T & K wall brackets to suit almost any application and constructed from 40mm x 40mm x 5mm angle iron, and totally s...
£77.79(Inc VAT at 20%)
 |
Description Safe working load:- 30Kg Breaking strength:- 100Kg Elongation working:- 2.4 % Weight:- 0.2 Kg/100 m New type of g...
£24.26(Inc VAT at 20%)
 |
2.5 X 2.5 CROSSOVER PLATE
£15.83(Inc VAT at 20%)
 |
Description Safe working load:- 60Kg Breaking strength:- 200Kg Elongation working:- 2.4 % Weight:- 0.5 Kg/100 m New type of...
£31.50(Inc VAT at 20%)
 |
Description Safe working load:- 120Kg Breaking strength:- 400Kg Elongation working:- 2.4 % Weight:- 1.5 Kg/100 m Ne...
£44.10(Inc VAT at 20%)
 |
MATERIAL:- T316 STAINLESS STEEL, MARINE GRADE (A4) 2" x 3" Crossover or Inline Mounting with 2 x 3" 'V' Bolts, 2 x 2.2" 'V' Bolts...
£39.25(Inc VAT at 20%)
 |
A cable grip is used in the Radio Communications industry to secure a loop in a rope or wire cable to hold a wire thimble for tens...
£3.88(Inc VAT at 20%)
 |
A cable grip is used in the Radio Communications industry to secure a loop in a rope or wire cable to hold a wire thimble for tens...
£4.16(Inc VAT at 20%)
 |
A cable grip is used in the Radio Communications industry to secure a loop in a rope or wire cable to hold a wire thimble for tens...
£4.73(Inc VAT at 20%)
 |
2" x 3" CROSSOVER OR INLINE MOUNTING, 2 ABS ISOLATING SADDLES & 2 x 3" SADDLES T316 STAINLESS STEEL, MARINE GRADE A4
£53.36(Inc VAT at 20%)
 |
The BE611/ 3 connects a 2” mast to a 3” masts at right angles and the finish is galvanised. Made in our own workshop f...
£15.83(Inc VAT at 20%)
 |
2.2" x 2.2" 'U' & 'V' BOLT CROSSOVER PLATE T316 STAINLESS STEEL, MARINE GRADE (A4) WITH 2 ISOLATING SADDLES
£60.58(Inc VAT at 20%)
 |
BNC PLUG RG58, RG223 CLAMP, TOP HAT COMPRESSION
£3.84(Inc VAT at 20%)
 |
Off
N PLUG RG58, RG223, RG400 CLAMP, TOP HAT COMPRESSION
£5.46(Inc VAT at 20%)
 |
2.2" x 2.2" 'V' BOLT CROSSOVER PLATE T316 STAINLESS STEEL, MARINE GRADE (A4) WITH 4 ISOLATING SADDLES
£54.18(Inc VAT at 20%)
 |
3" SADDLE CLAMP ( SLEDGE / JAW CLAMP ) FOR 1" - 3" MAST IN 3mm T316 SS (MARINE GRADE) A4
£9.26(Inc VAT at 20%)
 |
N Plug ANT400, CNT400, LMR400, Ecoflex-10 or Equivalent Cable, Clamp, Top Hat Compression White Bronze Body, Solder Pin Gold...
£8.27(Inc VAT at 20%)
 |
HF Plug Ecoflex-10, ANT400, CNT400, LMR400 or Equivalent Cable, Clamp, Top Hat Compression White Bronze Body with Crimp and or Sol...
£7.88(Inc VAT at 20%)
 |
BNC Line Socket (Jack) RG58, RG223 or Equivalent Cable, Clamp, Top Hat Compression White Bronze Body, Solder Pin Gold Plated. Bod...
£4.65(Inc VAT at 20%)
 |
N Line Socket (Jack) RG58, RG223 or Equivalent Cable, Clamp, Top Hat Compression White Bronze Body, Solder Pin Gold Plated. Clamp...
£5.46(Inc VAT at 20%)
 |
RG-213 CABLE ENTRY PL-259 PLUG
£5.75(Inc VAT at 20%)
 |
This is a compression fitting plug designed for RG8X MINI.
£7.01(Inc VAT at 20%)
 |
RG-58 CABLE ENTRY PL-259 PLUG
£4.32(Inc VAT at 20%)
 |
BNC PLUG TO TWO BNC SKTS 'U'
£7.88(Inc VAT at 20%)
 |
N Line Socket (Jack) for WESTFLEX, CNT400, LMR400, Ecoflex-10 or Equivalent Cable, Clamp, Top Hat Compression White Bronze B...
£6.89(Inc VAT at 20%)
 |
ADAPTOR N-TYPE SOCKET TO BNC SOCKET
£4.22(Inc VAT at 20%)
 |
ADAPTOR ELBOW BNC SOCKET BNC PLUG
£5.62(Inc VAT at 20%)
 |
N-TYPE PLUG ELBOW TO N-TYPE SOCKET
£4.80(Inc VAT at 20%)
 |
BNC MALE PLUG TO MALE PLUG
£4.49(Inc VAT at 20%)
 |
N type Male to Male Adapter Connector
£5.07(Inc VAT at 20%)
 |
A range of metal die cast pulleys made from Mazek Zinc and fitted with Nylon wheels. All pulley wheels are secured with 4.0mm plat...
£6.98(Inc VAT at 20%)
 |
Ground guy stakes are suitable for both driving into soil and for securing into concrete. They have a 12.5mm hole in the welded to...
£17.90(Inc VAT at 20%)
 |
A special feature of the design is the latch mechanism which holds the mast safely in the upright position while the securing bolt...
£192.88(Inc VAT at 20%)
 |
These brackets enable a (Bell type) rotator to be side mounted onto a static pole. This increases the stability and reduces the we...
£115.45(Inc VAT at 20%)
 |
Wall bracket for masts which are not required to clear very large overhang.*** ONE BRACKET ONLY ***
£8.54(Inc VAT at 20%)
 |
UHF PLUG PL259 ECOFLEX-15, ANT600, CNT600, LMR600 CLAMP, TOP HAT COMPRESSION, CRIMP/SOLDER PIN OR SOLDERLESS.
£9.53(Inc VAT at 20%)
 |
A range of metal die cast pulleys made from Mazek Zinc and fitted with Nylon wheels. All pulley wheels are secured with 4.0mm plat...
£8.40(Inc VAT at 20%)
 |
Bracket is of welded angle iron contruction with 7.5" between mast fixing centres and will handle a 1.5" aluminium mast.
£10.24(Inc VAT at 20%)
 |
Screwbolt anchors are a new concept in fixing to brick and other materials. The same anchor can be used in all materials just by v...
£2.03(Inc VAT at 20%)
 |
Ground guy stakes are suitable for both driving into soil and for securing into concrete. They have a 12.5mm hole in the welded to...
£21.74(Inc VAT at 20%)
 |
Mast to boom right angle clamp, 1" mast to 1" boom, Light Duty. Clamp with M6 bolts for Mast to Boom clamp or frame building if m...
£2.97(Inc VAT at 20%)
 |
This design is based on the well proven gin pole technique, with the addition of many other practical features all combined in one...
£257.43(Inc VAT at 20%)
 |
Wall bracket for masts which are not required to clear very large overhang.
£12.78(Inc VAT at 20%)
 |
1.5" x 1.5" ALUMINIUM CROSSOVER - M6 BOLTS - 4"x4"x1/4" Plate - BE640/6/U15U15
£17.11(Inc VAT at 20%)
 |
A range of metal die cast pulleys made from Mazek Zinc and fitted with Nylon wheels. All pulley wheels are secured with 4.0mm plat...
£8.95(Inc VAT at 20%)
 |
Ground guy stakes are suitable for both driving into soil and for securing into concrete. They have a 12.5mm hole in the welded to...
£25.30(Inc VAT at 20%)
 |
Mast to boom right angle clamp, 1" - 2" round mast to 1/2" - 1" square boom, or 1" round. Clamp Square Boom Section is stepped fo...
£2.99(Inc VAT at 20%)
 |
Portable mast base for the temporary mast where your vehicle can be used both as support and weight to anchor the mast.
£125.08(Inc VAT at 20%)
 |
Wall brackets for masts which are required to clear very small or no overhang.
£15.70(Inc VAT at 20%)
 |
Bracket to attach winch to a 2" pole. Complete with 2 'U' bolts and 2 x M8 x 20mm bolts and locking nuts.
£21.32(Inc VAT at 20%)
 |
A range of metal die cast pulleys made from Mazek Zinc and fitted with Nylon wheels. All pulley wheels are secured with 4.0mm plat...
£10.23(Inc VAT at 20%)
 |
Screwbolt anchors are a new concept in fixing to brick and other materials. The same anchor can be used in all materials just by v...
£3.56(Inc VAT at 20%)
 |
Mast to boom right angle clamp, light duty 1 - 2" round mast to 1" round boom. Scaffolding pole to 1" boom is this clamps best us...
£3.52(Inc VAT at 20%)
 |
Four 2" sockets with 2xM12 bolts located on each socket and arranged to give three leg supports and one vertical.
£159.10(Inc VAT at 20%)
 |
Wall bracket for mast which is required to clear very small or no overhang or Pole to Pole spacing of 4” (100mm), 6” (...
£15.91(Inc VAT at 20%)
 |
Large corner plate for lashing protection around chimney corners.
£0.33(Inc VAT at 20%)
 |
Eyebolts have a closed end of the bolt, welded closed for security and will not pull out under tension.
£2.19(Inc VAT at 20%)
 |
Mast to boom right angle or parallel clamp 1"-2" round mast to 1" round boom secured in 90mm length of tube with two pinch bolts. ...
£7.85(Inc VAT at 20%)
 |
The base tilt support is designed to use with the 2" or 50mm mast, a suitable wall bracket on and a pulley system.
£46.75(Inc VAT at 20%)
 |
Wall bracket to suit almost any application. Constructed from 40 x 40 x 5mm angle iron and totally seam welded.
£36.70(Inc VAT at 20%)
 |
Mast to boom right angle or parallel clamp 1"-2" round mast to 1.25" round boom secured in 90mm length of tube with one pinch bolt...
£7.85(Inc VAT at 20%)
 |
The short tilt support is similar to the BE 201 but, is designed to hold a 2” or 1.5” aluminium mast, to be used in co...
£51.47(Inc VAT at 20%)
 |
Wall bracket to suit almost any application. Constructed from 40 x 40 x 5mm angle iron and totally seam welded.
£39.85(Inc VAT at 20%)
 |
Adaptor from Female N-type to PL-259
£6.56(Inc VAT at 20%)
 |
Mast to boom right angle or parallel clamp 1"- 2" round mast to 1.5" max. round boom. Bracket can be used for mounting boom to ma...
£5.14(Inc VAT at 20%)
 |
BE204 is a simple socket mast support and is ideal where there is not the need to lower the mast at frequent intervals.
£26.20(Inc VAT at 20%)
 |
Wall bracket to suit almost any application. Constructed from 40 x 40 x 5mm angle iron and totally seam welded.BE401/18 Mast to wa...
£36.16(Inc VAT at 20%)
 |
Available in two diameters 12mm and 10mm, these being drill sizes required. And 70mm and 75mm being the minimum depths.
£2.02(Inc VAT at 20%)
 |
Mast to boom right angle ( T V Aerial ) clamp 1" - 2" round mast to 15mm square boom. Light duty clamp with M6 2" 'V' Bolt. Requi...
£2.61(Inc VAT at 20%)
 |
The double socket is designed to hinge a 2" or 50mm mast some distance above the ground.
£64.00(Inc VAT at 20%)
 |
Wall bracket to suit almost any application. Constructed from 40 x 40 x 5mm angle iron and totally seam welded.
£46.41(Inc VAT at 20%)
 |
Flexible galvanised steel rope all with a construction of 6 x 19 strands and fibre core.
£98.28(Inc VAT at 20%)
 |
All turnbuckles are supplied with a ring at one end and hook at the other.
£3.54(Inc VAT at 20%)
 |
Available in two diameters 12mm and 10mm, these being drill sizes required. And 70mm and 75mm being the minimum depths.
£2.34(Inc VAT at 20%)
 |
2" x 6" U bolt and three saddles. Used to couple two masts in parallel. Finish: Plated We have photographed an arrangement with 2...
£7.88(Inc VAT at 20%)
 |
This tilt version allows larger aerial systems to be erected with fewer people. The ground spike is 12" long and will accept up to...
£53.07(Inc VAT at 20%)
 |
Wall bracket to suit almost any application. Constructed from 40 x 40 x 5mm angle iron and totally seam welded.
£18.74(Inc VAT at 20%)
 |
All turnbuckles are supplied with a ring at one end and hook at the other.
£2.91(Inc VAT at 20%)
 |
DOUBLE LASHING CHIMNEY BRACKET (PAIR)This chimney bracket is sold in pairs and will give adequate support proportional to spacing ...
£25.41(Inc VAT at 20%)
 |
The BE611/1 connects two 2" masts at right angles. This product gives a very strong connection between masts, and can be used to ...
£19.90(Inc VAT at 20%)
 |
The ground spike is 12" long and will accept up to 2" masting. (Main image of Ground Spike with Tilt)
£35.46(Inc VAT at 20%)
 |
Wall bracket to suit almost any application. Constructed from 40 x 40 x 5mm angle iron and totally seam welded.
£26.20(Inc VAT at 20%)
 |
All turnbuckles are supplied with a ring at one end and hook at the other.
£4.30(Inc VAT at 20%)
 |
GALVANIZED LASHING WIRE Description Seven strand 18 gauge wire in 17ft coils suitable for chimney bracket lashing. The most e...
£2.97(Inc VAT at 20%)
 |
For inline coupling of two 2" masts. A stop is provided half way down the coupler to ensure equal entry from both ends.
£19.29(Inc VAT at 20%)
 |
Wall bracket to suit almost any application. Constructed from 40 x 40 x 5mm angle iron and totally seam welded.
£21.58(Inc VAT at 20%)
 |
Off
HEAVY DUTY DOUBLE LASHING CHIMNEY BRACKET - 200MM This chimney bracket is sold in pairs and will give adequate support proportion...
£28.98(Inc VAT at 20%)
 |
For inline coupling of two 1.5" masts. A stop is provided half way down the coupler to ensure equal entry from both ends.
£17.59(Inc VAT at 20%)
 |
Wall bracket to suit almost any application. Constructed from 40 x 40 x 5mm angle iron and totally seam welded.
£26.33(Inc VAT at 20%)
 |
A range of thimbles to accept our range of poly rope, and galvanised wire rope.
£0.52(Inc VAT at 20%)
 |
3 Hook, 3 Section mast guy clamp for 1.5" to 2" dia. mast, Light Duty. Uses 3 x M8 bolts to secure to mast and has 3 tapering slo...
£6.29(Inc VAT at 20%)
 |
A range of thimbles to accept our range of poly rope, and galvanised wire rope.
£0.60(Inc VAT at 20%)
 |
3 Eye single section fabricated mast guy clamp, Heavy Duty. Will fit Scaffolding size tube ( 48mm to 51mm ) or 2" 3 x 13mm...
£16.64(Inc VAT at 20%)
 |
A range of thimbles to accept our range of poly rope, and galvanised wire rope.
£0.67(Inc VAT at 20%)
 |
3 Eye, 3 Section fabricated mast guy clamp, Heavy Duty. Will fit Scaffolding size tube ( 44mm to 58mm ) or 1.75" to 2.25" w...
£16.64(Inc VAT at 20%)
 |
A bracket of welded construction suitable for light aerials and short stand-off of 3" mast to wall clearance.
£14.81(Inc VAT at 20%)
 |
A range of thimbles to accept our range of poly rope, and galvanised wire rope.
£0.84(Inc VAT at 20%)
 |
4 Hook, 4 Section mast guy clamp for 1.9" to 3" ( 48mm to 75mm ) diameter mast, Light Duty. Uses 4 x M8 bolts to secure to ...
£7.91(Inc VAT at 20%)
 |
A bracket of welded construction suitable for light aerials and short stand-off of 3" mast to wall clearance.
£12.49(Inc VAT at 20%)
 |
4 Eye single section fabricated mast guy clamp, Heavy Duty. Will fit Scaffolding size tube ( 48mm to 51mm ) or 2". 4 x 13m...
£22.04(Inc VAT at 20%)
 |
This bracket will accept a 2" tube. This bracket can also be used on a 2" pole by use of a second pair of BE915 'V' bolts.
£27.49(Inc VAT at 20%)
 |
A range of thimbles made from stainless steel to complement our range of ropes and cable grips.
£0.84(Inc VAT at 20%)
 |
4 Eye, 4 Section mast guy clamp, Heavy Duty. Will fit Scaffolding size tube ( 48mm to 75mm ) or 1.9" to 3" with bolts provi...
£22.04(Inc VAT at 20%)
 |
Self support guying can be achieved when you use the mast brace bracket. Suitable for 45-50mm diameter masts. Giving a standoff o...
£37.31(Inc VAT at 20%)
 |
This bracket will accept a 2" tube. This bracket can also be used on a 2" pole by use of a second pair of BE915 'V' bolts.
£29.02(Inc VAT at 20%)
 |
Mast clamps used when only a single or double attachment point is required for the pulley system and or bracing wire. Suitable for...
£9.55(Inc VAT at 20%)
 |
This bracket will accept a 2" tube. This bracket can also be used on a 2" pole by use of a second pair of BE915 'V' bolts.
£30.34(Inc VAT at 20%)
 |
A range of thimbles made from stainless steel to complement our range of ropes and cable grips.
£2.32(Inc VAT at 20%)
 |
Mast clamps used when only a single or double attachment point is required for the pulley system or bracing wire. Suitable for sc...
£10.75(Inc VAT at 20%)
 |
This bracket will accept a 2" tube. This bracket can also be used on a 2" pole by use of a second pair of BE915 'V' bolts.
£39.85(Inc VAT at 20%)
 |
The rope cleat is used for securing the pulley system rope and is not intended for use as a straining point.
£9.31(Inc VAT at 20%)
 |
A mast to boom clamp. Up to 2" mast and 1.25" boom. The boom is secured by a 145mm tube clamp with three locking bolts. Vertical c...
£20.61(Inc VAT at 20%)
 |
The main requirement for this stand-off bracket is to clear cables around rotators. Another use is on telescopic masts which have ...
£10.00(Inc VAT at 20%)
 |
A range of 'V' & 'U' bolts suitable for securing masts to various brackets made from mild steel and plated or stainless steel ...
£0.73(Inc VAT at 20%)
 |
N Plug RG213 Clamp, Top Hat Compression White Bronze Body, Crimp and or Solder Pin Gold Plated. This connector can be f...
£5.46(Inc VAT at 20%)
 |
A range of 'V' & 'U' bolts suitable for securing masts to various brackets made from mild steel and plated or stainless steel ...
£1.43(Inc VAT at 20%)
 |
A range of 'V' & 'U' bolts suitable for securing masts to various brackets made from mild steel and plated or stainless steel ...
£0.67(Inc VAT at 20%)
 |
A range of 'V' & 'U' bolts suitable for securing masts to various brackets made from mild steel and plated or stainless steel ...
£1.25(Inc VAT at 20%)
 |
A range of 'V' & 'U' bolts suitable for securing masts to various brackets made from mild steel and plated or stainless steel ...
£3.82(Inc VAT at 20%)
 |
Colinear clamp capable of securing 1.25" based colinear aerial to up to 2" mast, or any in line pole. The main advantage for this ...
£22.49(Inc VAT at 20%)
 |
A range of 'V' & 'U' bolts suitable for securing masts to various brackets made from mild steel and plated or stainless steel ...
£2.51(Inc VAT at 20%)
 |
Colinear clamp capable of securing 1.5" based colinear aerial to up to 2" mast, or any in line pole. The main advantage for this t...
£25.70(Inc VAT at 20%)
 |
A range of 'V' & 'U' bolts suitable for securing masts to various brackets made from mild steel and plated or stainless steel ...
£0.67(Inc VAT at 20%)
 |
Colinear clamp capable of securing 2" based colinear aerial to up to 2" mast, or any in line pole. The main advantage for this typ...
£25.70(Inc VAT at 20%)
 |
A range of 'V' & 'U' bolts suitable for securing masts to various brackets made from mild steel and plated or stainless steel ...
£0.91(Inc VAT at 20%)
 |
Off
N-type Male to BNCF
£5.36(Inc VAT at 20%)
 |
A range of 'V' & 'U' bolts suitable for securing masts to various brackets made from mild steel and plated or stainless steel ...
£3.25(Inc VAT at 20%)
 |
A multi punched 6mm plate to secure a 2” pole to a square leg of a site cabin. Bracket supplied with one 4” square bot...
£35.86(Inc VAT at 20%)
 |
mini unf plug for sun sdr 2
£4.87(Inc VAT at 20%)
 |
A range of 'V' & 'U' bolts suitable for securing masts to various brackets made from mild steel and plated or stainless steel ...
£2.15(Inc VAT at 20%)
 |
4" Square Bottom Bolt - M8 Thread Internal Width - 4" (103mm) Leg Length - 4.3/4" (122mm) Thread Length - 2....
£3.94(Inc VAT at 20%)
 |
Off
SMA PLUG / UHF SOCKET INTERSERIES ADAPTOR - 166515
£5.79(Inc VAT at 20%)
 |
DOUBLE FEMALE SO-239 UHF BULKHEAD CONNECTOR, 2-INCH BARREL
£6.56(Inc VAT at 20%)
 |
A range of 'V' & 'U' bolts suitable for securing masts to various brackets made from mild steel and plated or stainless steel ...
£1.49(Inc VAT at 20%)
 |
A range of 'V' & 'U' bolts suitable for securing masts to various brackets made from mild steel and plated or stainless steel ...
£1.12(Inc VAT at 20%)
 |
A range of 'V' & 'U' bolts suitable for securing masts to various brackets made from mild steel and plated or stainless steel ...
£1.29(Inc VAT at 20%)
 |
A range of 'V' & 'U' bolts suitable for securing masts to various brackets made from mild steel and plated or stainless steel ...
£1.02(Inc VAT at 20%)
 |
Light duty fixing for brick, such as BE713 with short pole. Complete with bolt and wall plug.
£1.26(Inc VAT at 20%)
 |
BNC Female to SMA Male Adapter
£4.73(Inc VAT at 20%)
 |
2" Saddle Clamp with serrated edges for use with most V & U bolts up to 2" internal diameter. As used on Order Code : BE610. ...
£1.42(Inc VAT at 20%)
 |
3mm Cable Grip to suit polypropylene and steel ropes. Suitable for ropes up to 3mm, and recommended that each rope end has 2 x ca...
£0.60(Inc VAT at 20%)
 |
5mm Cable Grip to suit polypropylene and steel ropes. Suitable for ropes up to 5mm, and recommended that each rope end has 2 x ca...
£0.67(Inc VAT at 20%)
 |
6mm Cable Grip to suit polypropylene and steel ropes. Suitable for ropes up to 6mm, and recommended that each rope end has 2 x ca...
£0.76(Inc VAT at 20%)
 |
8mm Cable Grip to suit polypropylene and steel ropes. Suitable for ropes up to 8mm, and recommended that each rope end has 2 x ca...
£0.84(Inc VAT at 20%)
 |
A range of sprung loaded snap hooks for connections to closed eye situations where speed and efficiency is required.
£1.52(Inc VAT at 20%)
 |
A range of sprung loaded snap hooks for connections to closed eye situations where speed and efficiency is required.
£1.69(Inc VAT at 20%)
 |
A range of sprung loaded snap hooks for connections to closed eye situations where speed and efficiency is required.
£2.10(Inc VAT at 20%)
 |
Nickel BNC Socket (Female) Dust Cap Bayonet
£3.67(Inc VAT at 20%)
 |
A range of sprung loaded snap hooks for connections to closed eye situations where speed and efficiency is required.
£2.53(Inc VAT at 20%)
 |
5mm 'D' shackle connecting closed eye components. The dimension referred to in the order code is the diameter of the securing pin...
£1.05(Inc VAT at 20%)
 |
6mm 'D' shackle connecting closed eye components. The dimension referred to in the order code is the diameter of the securing pin...
£1.16(Inc VAT at 20%)
 |
8mm 'D' shackle connecting closed eye components. The dimension referred to in the order code is the diameter of the securing pin...
£1.10(Inc VAT at 20%)
 |
10mm 'D' shackle connecting closed eye components. The dimension referred to in the order code is the diameter of the securing pi...
£1.78(Inc VAT at 20%)
 |
12mm 'D' shackle connecting closed eye components. The dimension referred to in the order code is the diameter of the securing pi...
£2.14(Inc VAT at 20%)
 |
The pulley mounting block will take up to three pulleys and can be fitted upto a 2" mast using 'V' bolt BE915 or wall fixing ancho...
£6.65(Inc VAT at 20%)
 |
A secure link with a positive barrel lock and an alternative link to BE926 for connection of pulleys etc.
£1.29(Inc VAT at 20%)
 |
Standard 'J' Bolt for securing chimney brackets and for light duty tensioning etc.
£89.25(Inc VAT at 20%)
 |
30mm Single Sheave, SIngle Eye, Maximum Load 250Kg Frame Size : 27mm x 30mm x 80mm Length. Pulley Wheel 30mm Diameter, Maximum R...
£7.35(Inc VAT at 20%)
