West Mountain Radio Accessories

https://www.hamradio.co.uk/
West Mountain Radio Accessories
Results : 49 - 96 of 191 |Show
Sort by :
Page of 4
Buss 20A ATC Circuit Breaker 58537-1089

For all RIGrunner fuse positions (Except 4010S Master) Manual Reset Single Pole Circuit Breaker COOPER Bussmann Automotive Products Caution: Due to thicker blade width, once this Circuit Breaker is inse...

£7.95(Inc VAT at 20%)
Buss 15A ATC Circuit Breaker 58537-1088

For all RIGrunner fuse positions (Except 4010S Master) Manual Reset Single Pole Circuit Breaker COOPER Bussmann Automotive Products Caution: Due to thicker blade width, once this Circuit Breaker is inse...

£7.95(Inc VAT at 20%)
Buss 10A ATC Circuit Breaker 58537-1087

For all RIGrunner fuse positions (Except 4010S Master) Manual Reset Single Pole Circuit Breaker COOPER Bussmann Automotive Products Caution: Due to thicker blade width, once this Circuit Breaker is inse...

£7.95(Inc VAT at 20%)
Fuse Assortment High Value 58537-1086

Extra ATC/ATO Fuses. Package includes: 2 ea. of 15A, 20A, 30A, 40A, 8 pcs total

£5.95(Inc VAT at 20%)
Fuse Assortment Low Value 58537-1085

Extra ATC/ATO Fuses. Package includes: 3 @ 1A, 3 @ 5A & 2 & 10A, 8 pcs total

£5.95(Inc VAT at 20%)
PWRlock - RIGrunner Retainer Kit 58512-1060

Some have complained that Powerpole® unplugs too easily. They can fall out especially in a car. This Retainer Kit fits RI...

£16.95(Inc VAT at 20%)
PWR AC Controller 58317-1389

PWR AC Controller is an accessory device using 12VDC to switch 120VAC. Powerpole® connectors on the 12VDC input connect t...

£59.95(Inc VAT at 20%)
PWRcrimp Die Set - Replacement (Powerpole™ 15-30-45A) 58568-1057

Replacement Die Set (15-30-45 PP) for West Mountain Radio PWRcrimp Tool WILL NOT WORK WITH OR FIT ANY OTHER TOOL Crimps - 15, ...

£16.95(Inc VAT at 20%)
PWRcrimp Die Set Package (all except replacement) 58568-1056

The 6 Die Set Package for the West Mountain Radio PWRcrimp Tool contains: 1 - 01 Insulated Terminal Die Set 1 - 02 Non-insulat...

£65.95(Inc VAT at 20%)
PWRcrimp - Crimp Tool for Powerpoleᆴ Connectors 58568-1049

PWRcrimp - Crimp Tool for Powerpole® Connectors. High performance Powerpole® crimp tool for a reasonable pric...

£47.95(Inc VAT at 20%)
PWRcrimp Die Set - RJ45 8P Modular 58507-1055

RJ45 8P Modular Plug Die Set for the West Mountain Radio PWRcrimp Tool Crimps - Keyed or non-Keyed Modular Plug (excluding AMP)...

£16.95(Inc VAT at 20%)
PWRcrimp Die Set - RG59, RG6, F type, CATV 58505-1054

RG59, RG6, F Type, CATV Connector Die Set for the West Mountain Radio PWRcrimp Tool Crimps Hex - 0.35/0.32/0.255

£16.95(Inc VAT at 20%)
PWRcrimp Die Set - RG58, RG59/62, BNC/TNC, Coax 58505-1053

RG58, RG59/62, BNC/TNC, Coaxial Connector Die Set for the West Mountain Radio PWRcrimp Tool Crimps Hex - 0.255/0.213/0.068

£16.95(Inc VAT at 20%)
PWRcrimp Die Set - Non-insulated Terminals 58502-1052

Non-insulated Terminal Die Set for the West Mountain Radio PWRcrimp Tool Crimps Non-insulated Terminals from 0.5mm to 10.0mm ...

£11.95(Inc VAT at 20%)
PWRcrimp Die Set - Non-insulated Open Barrel Terminals 58502-1051

Non-insulated Open Barrel Terminal Die Set for the West Mountain Radio PWRcrimp Tool Crimps Non-insulated Open Barrel Terminals...

£11.95(Inc VAT at 20%)
PWRcrimp Die Set - Insulated Terminals 58502-1050

Insulated Terminal Die Set for the West Mountain Radio PWRcrimp Tool Crimps Insulated Terminals from 0.5mm to 6.0mm

£11.95(Inc VAT at 20%)
DB9F to USB
50%
Off

USB to RS232 Male Adapter cable with Female converter for CAT communcication on radios with a DB-9 for RS232 rig control connector...

£20.95(Inc VAT at 20%)
RIGtalk USB for Rig Control Interface

USB to TTL level interface for CI-V Radios Pocket Sized USB Dongle Design Tested With Most Rig Control & Logging Software ...

£45.95(Inc VAT at 20%)
USB External Sound Card Adapter 58141-1633

This USB device may be used with any RIGblaster that uses the PC internal sound card. It adds another sound device to the PC so yo...

£11.95(Inc VAT at 20%)
VoIP Internet Linking for Radio Amateurs (Second Edition) 58141-1011

Growing numbers of hams are using VoIP, or Voice Over Internet Protocol, in combination with their radios for long-distance commun...

£26.34(Inc VAT at 20%)
Bluetooth™ 4.0 Dongle Micro Wireless Adapter for PC 58140-1505

Capabilites USB 2.0 Mini Wireless Bluetooth® V4.0 Dual Mode Dongle Adapter 20m for PC Laptop Suggested to use with a PC...

£11.94(Inc VAT at 20%)
Bluetooth™ Wireless Headset w/ Mic 58140-1504

Capabilites Balance & lightweight, Headset, Handsfree, A2DP and AVRCP Profiles Blocks four times the external noise Noise...

£53.95(Inc VAT at 20%)
DVD of Sound Card Software Collection  58140-1010

This DVD is included FREE with every RIGblaster. It is available here as an additional or replacement option. A DVD of the RIGbla...

£11.95(Inc VAT at 20%)
RB Jumpers - Pro Kit 58137-1003

Includes (12) White Jumpers (6) Blue Shunt Jumpers 1/4" Adapter (4) 3M Adhesive Pads (4) Black Screws This is the Jumper...

£24.00(Inc VAT at 20%)
RB Jumpers - M4, M8, RJ & plus Kit 58137-1002

Includes (8) White Jumpers (5) Blue Shunt Jumpers (4) Rubber Feet (4) 3M Adhesive Pads (4) Black Screws This is the Jump...

£12.00(Inc VAT at 20%)
4 Pin to 8 Pin Round Conversion Kit 58136-1000

This kit contains 2 components; a 4 Pin Screw On Custom Mic Cable, 3ft. and a 4 Pin to 8 Pin Mic Adapter. It is used to adapt the ...

£23.95(Inc VAT at 20%)
FSK for Elecraft K3 DB15

Operate FSK RTTY with your Elecraft K3 and the RIGblaster Pro, Advantage or Plus II.

£23.95(Inc VAT at 20%)
Fixed Level Audio + FSK for Yaesu MiniDIN-6 58131-1501

This cable is for Yaesu radios which support FSK on pin 4 of the 6 pin mini din jack. These include the FT-450/450D, FT-950D, FT D...

£35.95(Inc VAT at 20%)
Fixed Level Audio + FSK for Kenwood DIN-13 58131-999

This cable is for Kenwood radios that have a rear panel 13 pin DIN connector (See List Below) for Fixed Level Audio output and FSK...

£23.95(Inc VAT at 20%)
Fixed Level Audio + FSK for Yaesu DIN-4 58131-998

This cable is for Yaesu FT-1000 and other Yaesu radios that have a rear panel 4 pin DIN RTTY connector for FSK input and Fixed Lev...

£23.95(Inc VAT at 20%)
Fixed Level Audio for Yaesu MiniDIN-6 58131-997

This cable is for Yaesu FT-100, 100D, 450, 817, 857 & 897 radios. It provides fixed level audio from the Data Port of these ra...

£23.95(Inc VAT at 20%)
Fixed Level Audio for Yaesu RCA 58131-996

This cable is for Yaesu radios that have an RCA Fixed Level Audio connector on the rear panel. It provides fixed level audio from ...

£23.95(Inc VAT at 20%)
Fixed Level Audio + FSK for ICOM DIN-13 58129-995

This cable is for Icom radios that have a rear panel 13 pin DIN connector, such as IC-703, 706, 718 & 7000 for Fixed Level Aud...

£23.95(Inc VAT at 20%)
Fixed Level Audio + FSK for ICOM DIN-8 58129-994

This cable is for ICOM Radios (listed below) that have an 8 pin DIN Accessory (ACC1) connector on the rear panel. The un-labeled m...

£23.95(Inc VAT at 20%)
Fixed Level Audio for ICOM DIN-8 58129-993

This cable is for ICOM Radios (listed below) that have an 8 pin DIN Accessory (ACC1) connector on the rear panel. It provides fixe...

£23.95(Inc VAT at 20%)
1/8" (3.5mm) Stereo M-F Extension Cord, 10ft   58127-992

Used to extend the 6 foot audio cables shipped with RIGblasters.

£11.95(Inc VAT at 20%)
1/8" (3.5mm) Stereo M-M Cable, 6ft     58127-991

Included with every RIGblaster (6 with a RIGblaster Pro). It is available here as an additional or replacement option.

£11.95(Inc VAT at 20%)
DB9M to USB RS232 Adapter Cable 58126-990

Standard USB to RS232 Male Adapter cable. This cable connects your RIGblaster to any computer that has a USB Port but does not hav...

£23.95(Inc VAT at 20%)
DB9F to DB9M Serial Extension Cable, 6ft   58124-989

This cable, included with every RIGblaster (except M8), is available here as an extension or replacement option.

£11.95(Inc VAT at 20%)
https://www.hamradio.co.uk/accessories-by-manufacturer-west-mountain-radio-accessories/west-mountain-radio/rigblaster-12v-dc-cord-with-powerpole-6ft-58123-1404-pd-7972.php

This cable may be used to connect a RIGblaster Pro, Plus or M8/M4/RJ to a 12V DC supply. Fitted with a 15A Anderson Powerpole®...

£11.95(Inc VAT at 20%)
3.3x5.5mm DC to Stripped/Tinned Cable, 6ft   58123-987

This cable may be used to connect a RIGblaster Pro, Plus or M8/M4/RJ to a 12V DC supply. *This cable will not fit the RIGblaster ...

£11.95(Inc VAT at 20%)
RB Mic or CW to 1/4" Cable, 3ft 58122-986

This cable is not included with any RIGblaster but can be ordered for and used with a RIGblaster Nomic Universal only for keyboard...

£23.95(Inc VAT at 20%)
CW/FSK Combo Adapter   58120-1531

Allows simultaneous connection of CW and FSK cables to the same RIGblaster keying jack.

£5.94(Inc VAT at 20%)
CW for any 1/8" or 1/4" Radio, 6ft  58120-984

This kit is included with a RIGblaster Pro.Enable keyboard CW with the following products: RIGblaster Advantage RIGblaster Plu...

£11.95(Inc VAT at 20%)
RIG Control Cable for Kenwood RS232 CAT, RB-Pro, 6ft  58119-1513

Take control of your Kenwood RS-232C CAT transceiver (eg. TS-2000) using your RIGblaster Pro. Includes M/M DB-9 adapter.

£23.95(Inc VAT at 20%)
RIG Control Cable for Kenwood RS232 CAT, RB-Adv, 6ft 58119-1432

Take control of your Kenwood RS-232C CAT transceiver (eg. TS-2000) using your RIGblaster Advantage.

£11.95(Inc VAT at 20%)
RB Mic to Elecraft KX3/FX9A Cable, 6ft 58119-1431

This cable is not packaged with any RIGblaster. It is optionally available here for the Elecraft KX3, KX2, BG2FX, FX-9A for digita...

£23.95(Inc VAT at 20%)
RB Jumpers - ISC: Baofeng/Kenwood HT Cable 58119-1374

Turn a Wouxun or Baofeng or Kenwood HT into a portable EMCOMM digital-mode station. This set-up allows for hooking up a high quali...

£47.95(Inc VAT at 20%)
Results : 49 - 96 of 191 |Show
Sort by :
Page of 4
Yaesu
Icom