West Mountain Radio CLRdsp ClearSpeech® DSP Noise Reduction Processor 58407-949

  Product is successfully added to wishlist.

West Mountain Radio CLRdsp ClearSpeech® DSP Noise Reduction Processor 58407-949
£279.95 ( £233.29 EXC. VAT )
ESTIMATED SHIPPING COST:
£5.95
Click for in-store availability
Shipping to:
Add to cart
Product Information
  • Overview
  • Features
  • Specifications
Capabilities
  • Speaker and headphone amplifier with ClearSpeech® adaptive DSP noise reduction for voice and CW
  • Recognizes intermittent nature of CW and allows it to pass noise free
  • Continuously adjustable noise reduction
  • Contains 11 watt (into 4 ohms) power amplifier
  • Sturdy aluminum case - Ideal for mobile operation as well as home station
  • Powerpole® plugs into any 12V supply
  • Plugs into the speaker or headphone output typically found on Amateur transceivers
  • Low-level input for connection to headphone jack typically found on portable Shortwave receivers
  • Works with stereo (dual mono) or mono headphones. Volume control also adjusts headphone level
  • Line-level output for recording (e.g. using a computer sound card)
  • 1/8 inch phone jack on rear can drive external 8 or 4 ohm loudspeaker
  • On-Off switch with green indicator LED
  • RED LED flashes to indicate "clipping"
Capabilities
  • Speaker and headphone amplifier with ClearSpeech® adaptive DSP noise reduction for voice and CW
  • Recognizes intermittent nature of CW and allows it to pass noise free
  • Continuously adjustable noise reduction
  • Contains 11 watt (into 4 ohms) power amplifier
  • Sturdy aluminum case - Ideal for mobile operation as well as home station
  • Powerpole® plugs into any 12V supply
  • Plugs into the speaker or headphone output typically found on Amateur transceivers
  • Low-level input for connection to headphone jack typically found on portable Shortwave receivers
  • Works with stereo (dual mono) or mono headphones. Volume control also adjusts headphone level
  • Line-level output for recording (e.g. using a computer sound card)
  • 1/8 inch phone jack on rear can drive external 8 or 4 ohm loudspeaker
  • On-Off switch with green indicator LED
  • RED LED flashes to indicate "clipping"
Specifications

Enclosure Aluminum, powder coat painted
Dimensions 1.25" H x 4.25" W x 6" D
Power Requirements 9 to 16 Vdc; 1.1 A typical before onset of clipping
Audio Input High impedance, 0.01 VAC
Voltage Gain 46 dB
Audio Output Power 11 watts RMS maximum into 4 ohms @ 13.8 VDC
Maximum Audio Ouput Voltage 7.75 Vrms
Input Clipping Level 0.04 volts RMS
Frequency Response (filter enabled) 300 Hz to 3400 Hz
Frequency Response (filter disabled) 300 Hz to 12000 Hz
Noise Reduction Characteristics Adaptive, single tone greater than 50 dB
Recently Viewed
If you’d like us to let you know as soon as this product comes back into stock, please enter your email address and mobile number below.
 
Product is successfully added to wishlist.
Yaesu
Icom