West Mountain Radio PWRcheck 58430-1286

Hardware

• Handles 8 display modes including voltage, current flow in either direction, wattage and amp-hours
• Measures 0V* to 60V (Less than 8V requires USB power to PWRcheck), 40A continuous load
• Accurate to within +/- 10mV, +/- 10mA
• Resolution - 10mV, 10mA
• High side monitoring does not require breaking power supply ground or return path, ideal for vehicle use
• Backlit graphics LCD displays data in digital, analog and bar graph formats
• Monitor back up battery with programmable gas gauge
• Non-volatile memory stores more than 100,000 data points (nearly 2 1/2 months worth of data @ 1 point per minute) without power
• USB computer interface for configuration and data download
• Programmable alarm conditions for overcurrent, over/under voltage, amp-hours
• Uses Powerpole^® connectors (see Accessories)
• Dimensions: 0.875" H x 4.5" W x 3" D

* PWRcheck requires a minimum 50mA load to measure voltages below 4.5V.

Software

• Easily program every aspect of PWRcheck operation such as data logging rate, display formats, alarm conditions
• Displays current, voltage, wattage and amp-hours in real time
• Integrated charting software automatically collects and displays data
• Downloads stored data for later analysis
• Exports to Excel

Computer System Requirements

Basic Requirements:

• At least an 800 X 600 graphics card and display monitor
• Windows XP, Vista®: 32 or 64 bit, Windows® 7: 32 or 64 bit, Windows® 8, Windows® 10
• An available USB port

Capabilities

Hardware

• Handles 8 display modes including voltage, current flow in either direction, wattage and amp-hours
• Measures 0V* to 60V (Less than 8V requires USB power to PWRcheck), 40A continuous load
• Accurate to within +/- 10mV, +/- 10mA
• Resolution - 10mV, 10mA
• High side monitoring does not require breaking power supply ground or return path, ideal for vehicle use
• Backlit graphics LCD displays data in digital, analog and bar graph formats
• Monitor back up battery with programmable gas gauge
• Non-volatile memory stores more than 100,000 data points (nearly 2 1/2 months worth of data @ 1 point per minute) without power
• USB computer interface for configuration and data download
• Programmable alarm conditions for overcurrent, over/under voltage, amp-hours
• Uses Powerpole^® connectors (see Accessories)
• Dimensions: 0.875" H x 4.5" W x 3" D

* PWRcheck requires a minimum 50mA load to measure voltages below 4.5V.

Software

• Easily program every aspect of PWRcheck operation such as data logging rate, display formats, alarm conditions
• Displays current, voltage, wattage and amp-hours in real time
• Integrated charting software automatically collects and displays data
• Downloads stored data for later analysis
• Exports to Excel

Computer System Requirements

Basic Requirements:

• At least an 800 X 600 graphics card and display monitor
• Windows XP, Vista®: 32 or 64 bit, Windows® 7: 32 or 64 bit, Windows® 8, Windows® 10
• An available USB port