West Mountain Radio Super PWRgate PG40S 58403-1046

  Product is successfully added to wishlist.

West Mountain Radio Super PWRgate PG40S 58403-1046
Part Number: 58403-1046
£167.95 ( £139.96 EXC. VAT )
ESTIMATED SHIPPING COST:
£5.95
In Stock
Shipping to:
Add to cart
Call Now
Product Information
  • Overview
  • Features
  • Specifications
  • A Super PWRgate is a 12 volt backup power system rated at 40 amperes continuous from either a Power Supply or a Battery.
  • The Super PWRgate has a built-in four-stage battery charger with selectable current rates of 1, 4, 7 or 10 amperes.
  • Connected equipment will instantly switch to battery during a power blackout or power supply failure.
  • Uses two 80 ampere Schottky diodes as an OR-Gate to isolate the battery and power supply from each other.
  • Low loss PWRgate provides forward voltage drop of less than 0.3 volts at 20 A and 0.37 volts at 40 A.
  • Optimized for use with GELLED & AGM type batteries, but will keep flooded lead acid and marine type batteries near full charge as well.
  • Solid, durable construction in an aluminum case with heat sink. Includes mounting holes for convenient and secure use in mobile units.
  • Uses Anderson Powerpole® connectors
  • Dimensions: 1.65" H x 5.25" W x 3.9" D
  • A Super PWRgate is a 12 volt backup power system rated at 40 amperes continuous from either a Power Supply or a Battery.
  • The Super PWRgate has a built-in four-stage battery charger with selectable current rates of 1, 4, 7 or 10 amperes.
  • Connected equipment will instantly switch to battery during a power blackout or power supply failure.
  • Uses two 80 ampere Schottky diodes as an OR-Gate to isolate the battery and power supply from each other.
  • Low loss PWRgate provides forward voltage drop of less than 0.3 volts at 20 A and 0.37 volts at 40 A.
  • Optimized for use with GELLED & AGM type batteries, but will keep flooded lead acid and marine type batteries near full charge as well.
  • Solid, durable construction in an aluminum case with heat sink. Includes mounting holes for convenient and secure use in mobile units.
  • Uses Anderson Powerpole® connectors
  • Dimensions: 1.65" H x 5.25" W x 3.9" D
Specifications

Maximum Voltage: 18 Volts DC
Maximum Current: 40 Amperes
Circuit: Diode OR-Gate
Diodes: Two Schottky 80 Ampere, 20 Volt
Voltage Drop: 0.25 Vdc at 1 Ampere
0.37 Vdc at 40 Ampere
Charging Circuit: Smart, linear charger
Fuse switched for 1,4,7 or 10 Amperes (±5%) maximum
Peak voltage limit: 13.8 (Gelled), 14.2 (AGM),(±2%)
Peak voltage limit set via internal jumper to GELLED or AGM
Peak voltage terminate point: 0.1 Maximum current
Float Voltage: 13.5 volts (±2%)
LEDs: Green - Indicates charger is "ON"
Red - Indicates peak "PK" charge voltage
Yellow - Indicates Float "FL" voltage
Connectors: Anderson Powerpole®, 40A
Dimensions: 1.65" H x 5.25" W x 3.9" D
Weight: 0.9 lbs, 0.4 kg (aluminum enclosure with heat sink)
Mounting Holes: Two, 0.175 in. d, at a distance 4.875 in., for #8 hardware
Recently Viewed
If you’d like us to let you know as soon as this product comes back into stock, please enter your email address and mobile number below.
 
Product is successfully added to wishlist.
Yaesu
Icom