main product photo
Flex Tuner Genius XL
SKU Part Number: FLEX-TGXL-CONFIG
An advanced engineering approach to tuner development has resulted in truly highest quality hardware and software solutions. Our software...
Read More
Finance from £73.32 a month
As low as £2,299.00 £1,915.83
Availability: In stock
call

Seen this product cheaper elsewhere?

Call 0345 2300 599

An advanced engineering approach to tuner development has resulted in truly highest quality hardware and software solutions.

Our software developers have extended the tuner with new functions, and completed integration with Antenna Genius, forming a single system. Very easy to use, uncompromisingly functional, the integration of TGXL into the Genius platform extends both functions as well as protection systems.

Once setup, TGXL will remember individual settings for each frequency change and will go to bypass if your antenna is in a segment with good SWR.
TGXL also features an extremely accurate power and SWR meter.
The RF block was carefully designed and is built from only the highest quality RF capacitors, making sure it’s capable of enduring currents and voltages generated by high SWR’s. On the images below you can see the C block of the tuner, with capacitors that would individually endure RF currents of 10-15A and voltages from 1500 to 3500V.

A careful calculation on all frequencies and impedances has enabled us to to choose the best components and making the tuner as efficient as possible. It also features mechanisms for protection in extreme cases by reducing the maximum working conditions and protecting RF components from damage.

C Board TGXL

The table shows maximum power per band that the tuner can handle, for different SWR values on the antenna.

Table with max power vs SWR for TGXL

Preliminary specification of TGXL automatic antenna tuner - 2000W.
We might change some technical details without notice.

  • Integrates with any transceiver
  • Designed to complement FLEX-6000 series transceivers and the Power Genius XL™ amplifier
  • Seamless SmartSDR™ software integration
  • Complete control and monitoring (over LAN) from an intuitive Windows™ application
  • Contest ready - the ONLY single-radio SO2R solution in amateur radio
  • High accuracy SWR and power meter measures in bypass mode.... and much more.

General Specification

  • Tuning: Fully automatic and manually tuned operation
  • Frequency Range: 1.8 to 54 MHz continuous
  • Radio Interface: Works with all radios using Flex radio LAN, RS232, CI-V, BCD, Pin-to-Band (PTB), or use the built in frequency counter.
  • Alarms and Warnings: Low drive, Frequency Out of Range, Wrong band, and High power
  • Matching Range: Up to 10:1 SWR. Resonant antenna frequency range memories will bypass the tuner automatically.
  • Tuning Time: Tuning solutions (2 to 12 seconds) are stored in memory automatically. Stored memory switching is 20ms.
  • Tuning Power Requirement: 10W - 200W

User Interface

  • Large 4.5” color touch screen display
  • Front panel controls for manual switching, tuning & configuration
  • Windows™ utility application for over the network control and configuration

RF Characteristics

  • Nominal Impedance: 50-Ohm unbalanced
  • Nominal Operating Power: Up to 2000W
  • Duty Cycle: 100% ICAS
  • Protection: Intelligent SWR and power derating

1x3 version

  • Inputs and Outputs: 1x3 matrix (1 in, 3 out)
  • Switching: Matrix, manual or automatic by frequency/band

SO2R Version

  • Inputs and Outputs: 2 in, 2 out - each input is paired with one output
  • Switching: Non-matrix SO2R, manual or automatic by frequency/band

 

  • Connector type: UHF/PTFE (SO-239A)

Mechanical/Electrical

  • Power Supply: 12 - 16V DC @2A via an external 100 to 240 VAC power supply
  • Dimensions: 11.8” W x 13.8” D x 5.9” H (30cm W x 35cm D x 15cm H)
  • Weight: 15.4 lbs (7kg)

 Environmental

  • Temperature Range: -4F (-20C) to +122F (+50 C)
  • Humidity: up to 98 percent (non-condensing)
  • Altitude (ASL): up to 10,000 feet (3,050m)


View the full spec sheet

An advanced engineering approach to tuner development has resulted in truly highest quality hardware and software solutions.

Dimension (L x W x H)0 x 0 x 0Weight0 4O3A

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]