The KC901V is a RF multi-instrument integrating VNA, spectrum analyzer, field strength meter, and a low-frequency signal generator. It can do complete signal port vector measurement and 2-ports simple vector network analyzing.
Vector network analyzing up to 6.8GHz
1Hz frequency step
Good accuracy and anti-interference ability
Abundant functions and easy to carry (Weight less than 1kg)
Community developed and supported product
Transmission measurement (Filter adjustment, measuring amplifier, verifying directivity of antennas)
Spectrum display and field strength observance (inspecting radio station’s emission performance, searching for the interference sources)
The differences between 901V and 901S
The 901V and 901S have similar RF technical theories, so the 901V carries forward the technical effect of the KC901S
The 901S has taken sim-digital IF technology. The amplitude detection is analog and the phase discriminator is in digital form. The 901V has taken full-digital IF technology. Based on this improvement, the noise of the 901V’s phase amplitude path line has improved greatly compared with the KC901S.
Because of the improvement of the bridge, the 901V is already able to do the S11 measurement which reaches to 9KHz and the directionality is still good during the 9KHz to 6.8GHz.
The 901V’s spectrum function shares a same port with its S11 function. When using the transmission measurement, the way to use the port is opposite to 901S (are you able to guess why?).
The 901V’s S21 is vector. Although it only supports frequency response calibration, phase’s introduction can allow clearer judgment of the trend.
The 901V’s frequency range is from 9KHz to 6.8 GHz. Actually the frequency range can be set within 5KHz to 7GHz.
The 901V’s RBW can be set as 1KHz, 3KHz, 10KHz or 30KHz (actually it’s around 25KHz). The spectrum function is a bit stronger than the 901S.
Compared with the beta version of the 901S, the 901V’s beta version has added a network port. Both CPU and FPGA can be updated remotely.
KC901V is mainly used for adjusting various RF circuits, such as filters, amplifiers, splitters, combiners; testing input/output impedance, evaluating antenna feeding system and detecting equipment’s signal amplitudes at all level. It can also do filed strength measurement, which is useful during miscellaneous kinds of search for interference source etc.
Combining intelligence in the community, KC901V is the tool to study RF for students and hobbies. In professional situations, it is used in communication engineering, antenna manufacturing, daily maintenance of broadcast, RF circuits development and so on. KC901V improves working efficiency, ease the weight burden and improve working quality.