Ameritron ALS-500MRXCE Amplifier
SKU Part Number: ALS-500MRXCE
We don't stock this product. Contact us for a better alternative. Get up to 500W PEP output from this solid state compact unit measuring 90 x...
Read More
£1,289.95 £1,074.96
Pre Order
call

Want more help on this product?

Call 0345 2300 599
We don't stock this product. Contact us for a better alternative. 

Get up to 500W PEP output from this solid state compact unit measuring 90 x 229 x 380mm. Directly driven from any 100W transceiver, and the solid state design means no tuning is necesssary and there is almost six times the power advantage.The unit can be remotely controlled for boot mounting with the supplied ALS-500RC remote controller.

1.8 - 30MHz (All Ham bands) - Output: 500W PEP (400W CW) - Input: 50 Ohms 60W (typ) 100W (max) - Output Devices: Transistor 4 x 2SC2879 - Meters: Current meter 0-100A - Connectors: SO-239 - Keying: Relay closure or sinking to Gnd 12V - Supply: 13.8V DC - 2.43m (8ft) power cable supplied - Size: 393 x 220 x 95mm - Weight: 3.4kg c/w ALS-500RC remote controller

description_1

Ameritron mobile no tune Solid State Amplifier

-The 
AL-500MRXCE is a combination of the CE certifed AL-500MXCE and an AL-500MRXCE Remote, for 240V export.

-Mobile no tune Solid State Amplifier - uses four rugged 2SC2879 high power linear RF power transistors.

-Instant bandswitching, no tuning, no warm up - just turn on and operate - makes mobile QSOs safer.

-Very Compact - Just 3 ½" x 9" x 15" - fits in nearly any mobile installation; weighs only 7 pounds.

-Extremely quiet - quiet low speed, low volume fan stays off and silent until temperature rises.

-Output Power - 500 watts PEP, 400 Watts CW

Continuous Coverage - 1.5 to 22 MHz 10/12 Meters with easy to install optional kit.

-Load Fault Protection - disables and bypasses amplifier if antenna has excessively h high reflected power or if bandswitching is set lower than exciter frequency - virtually eliminates damage because of operating error; has Load Fault LED indicator.

-Thermal Overload Protection - disables and bypasses amplifier if temperature is excessively high; automatically resets when temp drop to safe level Thermal Overload LED indicator.

-Excellent harmonic suppression - multiple section output network, push-pull output circuit has excellent harmonic suppression.

-DC current meter lets you monitor collector current.

-ON/OFF Switch - bypasses amplifier for "barefoot" operation without having to disconnect high current power supply cables.

-Remote ON/OFF Control - lets you remote control ON/OFF function for out-of-the-way mounting of amplifier.

-Exciter Drive - less than 100 watts input gives full output.

-Power Supply Requirements - requires 14 VDC at 80 amperes peak current for PA transistors and separate line for 14 - 16 VDC at 4 amperes for control and bias circuits. Made in USA.

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link below and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, sales@hamradio.co.uk