Heil PR-10PKG PR-10 Set LB1 lighted base with PTT
SKU Part Number: PR-10PKG
From the amateur radio division of Heil Sound, Ltd, The PR10 Package. This small but mighty microphone will bring your radio to life with full speech...
Read More
£249.95 £208.29
Pre Order
call

Seen this product cheaper elseware?

Call 0345 2300 599
From the amateur radio division of Heil Sound, Ltd, The PR10 Package. This small but mighty microphone will bring your radio to life with full speech articulation and perfect balance.

The package contains Heil’s compact PR10 microphone, an LB-1 table base with an LED backlit transmit status light, and an adjustable 8” mic boom to bring the mic up to a comfortable operating position during use.

The PR10 is Heil’s newest communication microphone designed for articulate communication with most of todays transceivers. Although compact in size this microphone is built around a full 1-1/8” diameter dynamic element, just as our other PR series microphones used in commercial broadcast applications around the world. Producing full articulate sound from 85Hz to 16kHz you will be sure to be heard with every transmission.

PLEASE NOTE:

Most Icom transceivers do not have adequate mic pre ampfification to support a dynamic element, an external preamplifier may be required. Please check with your manual or visit www.heilsound.com for these applications and compatibility.
The PR10 Package includes a LB-1 table base. This sleek, sturdy table base will keep your PR10 microphone at a comfortable height for hours of use.
Integrated into the base we have a PTT control and an LED backlit indicator with three settings. The LEDs that illuminate the face and ring of the LB-1 base may be set to continuously glow, illuminate only while transmitting, or turned off with the three-position switch located on the right side of the base. Like our popular CB-1-PTT base, the LB-1 base has a 1/8” jack on the back and includes a 24” pigtail to interconnect the base to the proper CC-1 connecting cable. LB-1 requires 2-AA batteries for illumination.
*A CC-1-XLR series cable is needed to interface this microphone with a transceiver*

Please visit https://heilhamradio.com/support/adapter-selector/ for proper interface cable.

Yaesu FT-991/A FT-DX 1200/3000/5000/ 101/MD CC-1-XLR-Y
Kenwood TS-990/870/590/570 etc Heil CC-1 XLR-K8

Output Connection: 3 pin XLR PR 10
Generating Element: Heil Dynamic
Frequency Response: 85 Hz – 16 kHz
Polar Pattern: Cardioid
Impedance: 600 ohms balanced
Output Level: -55 dB @ 1,000 Hz
Diaphragm: 1 1/8” Low-mass aluminum
Weight: PR 10: 12 oz LB-1: 22.5 oz
Finish: Black Satin Epoxy


Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]