EAntenna 28OWA6 (11,55 dBi ﾖ 20,41 dB F/B) - R2010148
Notify Me When Available
Dimenions 235x17x11cm, Weight 21kg
EAntenna OWA antennas for HF, represent the highest development of HF antennas for its great features.
This performance is characterized in that:
You can listen to very low signals without QRM and QRN noise alters the audio clarity.
Direct feeding is 50 ohms, using supplied Balun.
The bandwidth of the OWA is the best technology development for the entire width of the band, and have low SWR / SWR.
The radiation pattern is similar to the LFA, but has more gain than these.
Its ratio of F / B is medium to high, offsetting the high gain front.
This is explained because in EAntenna:
Millimeter by millimeter, manufacture and build CNC machines and / or prepared to hundredths of a millimeter measurements for an accurate measurement.
It takes care of every piece of aluminum, by filing them smooth exterior and interior. All this by hand, skilled and prepared for a final product of extreme quality.
All hardware we use is in stainless steel AISI 304
The T5 aluminum used is 6061/6063 and 6082 T6, the best alloys for manufacturing antennas and resistant to the weather elements.
Always LFA EAntenna antennas are insulated from the boom, with German clamps PP (Polypropylene, -30 ° C / +60 ° C).
Square boom 50/45/40x2mm telescopic sections.
Items divided into 2 sections; central 20mm diameter and 15mm tips.
Mast plate of 150x150mm with 10mm thick with square U-bolts M8 boom to the plate and U-bolts of M8 to the plate to the mast.
Characteristics of the 28OWA6
To take advantage of both low solar cycle in full swing, you can achieve incredible results in this band. With a bandwidth will get amazing high gain wide band width
With a rotor G650/G800 have enough to rotate and resist the wind, because wind resistance offered by the elements is minimal.
Simple and quick, because the boom joints are easy to assemble. And the elements are attached by screws DIN 912 M3 Interns and Endless Clamp (Hose Clamp) for Driven to a quick and durable fastening.
Antenna very solid construction, and with an acceptable weight.
Available for enfasar 2 (below include enfasamiento table), and to make a profit is not known.
28,0 ~ 29,7 MHz.
3 kW. Balun Include
10,7m / 35,1'
6,0m / 19,7'
≥ 160kmh / ≥ 100mph
21,0 Kg / 46,3 Pounds
* Gain dBi (gain over isotropic dipole in free space) = -2.15 dBd ** Ratio Gain Front / Back “F / B” (gain when the antenna is rotated 180 ° azimuth direction) *** Balun included, there are options of 5 and 10 kW.