Contains 2 elements positioned above each other, for optimizing the separation by a single coaxial drop to get the 2 bands act without altering the signal and results from the interaction between bands and elements.
Elements divided into several sections, for simulated wind resistance above 160 kmh.
Mast plate of 305x100mm with 6mm thick with M8 U-bolts for the plate to the mast.
Features of the WARC1217
This antenna, although larger in size than a rigid dipole of the same bands, this antenna acts as an antenna of half wavelength, taking 3.0 dBi in free space, which no market rigid dipole has it, unless it monoband. This antenna improved more than in an actual installation being fully extended branches off the usual installation fixed inverted V wire.
Simple and quick, because the elements are attached by screws DIN 912 M3 for a lifetime installation, high pressure worm clamps on the ends for adjustment.
Antenna very solid construction, and with an acceptable weight.
It is recommended that if triband location above directives boom be located parallel to and at a distance not less than one meter.
Elements per Band:
8,02m / 26,3'
4,01m / 13,15'
≥ 160kmh / ≥ 100mph
6,0 Kg / 13,22 Pounds
* Gain dBi (gain over isotropic dipole in free space) = -2.15 dBd ** Ratio Gain Front / Back “F / B” (gain when the antenna is rotated 180 ° azimuth direction) *** Balun included, there are options of 5 and 10 kW.