-
ACCESSORIES
-
AMATEUR RADIO
-
AERIALS
- AVIONICS
- DIGITAL MODES
- SDR
- SCANNERS AND CB
- COMMERCIAL / PMR RADIO
- SPECIAL OFFERS
- USED EQUIPMENT
- DX & CONTESTERS
- KEMPTON2018
Bushcomm SWC-100CS Centre Fed Dipole (125w Data)
- Home
- AERIALS
- Amateur Antennas
- HF Base Antennas
- Wire Antennas
- Bushcomm Wire Antennas Bushcomm SWC-100CS Centre Fed Dipole (125w Data)
Product Information
- Overview
- Description
The SWC-100 is a high quality single wire antenna designed for base use. The original SWC's that were first made over a decade ago are still going strong and have continually been improved and refined to ensure higher quality and durability than ever b e f o r e . O n e o f t h e l a t e s t developments is the evolution of the balun box to incorporate anchor points, as opposed to using additional ancho r b o lt s, h e ight eni ng the structural integrity.
The SWC-100 is 34m long, however, where space is limited, the SWC-100 can be set up as an inverted "v" from either of the two sets of mounting points. At a mast height of 10m, this setup will need an average of 23m space. As with the majority of Bushcomm antennas the SWC-100 can be adapted to suit many different installation sites. It can be suspended, the higher the better, between any two points - although avoiding running it over iron-roofed building is advisable for optimal performance. A broadband antenna, it covers the frequency range of 4.9-30MHz without a tuner
Special Features
The SWC-100 is 34m long, however, where space is limited, the SWC-100 can be set up as an inverted "v" from either of the two sets of mounting points. At a mast height of 10m, this setup will need an average of 23m space. As with the majority of Bushcomm antennas the SWC-100 can be adapted to suit many different installation sites. It can be suspended, the higher the better, between any two points - although avoiding running it over iron-roofed building is advisable for optimal performance. A broadband antenna, it covers the frequency range of 4.9-30MHz without a tuner
Special Features
- 4.9 – 30MHz
- No Tuner Required
- S/S Wire & Fittings
- UV Resistant balun/load boxes
- Easy Installation (instructions provided)
- 125W Continous Data / 250 Watts PEP
Specifications
Electrical
Frequency Range: 4.9-30 MHz
Input Impedance: 50 OHM
Power Input: 125 Watts Continuous (CW) Data or Broadcast (250 Watts PEP)
Input Connector: UHF-type socket
Mechanical
Shipping Weight: Approx 2.3KG
Antenna Length: 34m
Electrical
Frequency Range: 4.9-30 MHz
Input Impedance: 50 OHM
Power Input: 125 Watts Continuous (CW) Data or Broadcast (250 Watts PEP)
Input Connector: UHF-type socket
Mechanical
Shipping Weight: Approx 2.3KG
Antenna Length: 34m
Recently Viewed
Bushcomm Wire Antennas£349.95(Inc VAT at 20.00%)
If you’d like us to let you know as soon as this product comes back into stock, please enter your email address and mobile number below.
|
We’re sorry, we are not able to process your request because of following errors. Please rectify them:
|
