EAntenna 144LFA16 (17,45 dBi ヨ 33,7 dB F/B) - R2010118
Product Information
- Overview
- Description
Dimensions 255x17x11cm, Weight 13.7kg

EAntenna LFA antennas for VHF represent the largest development in antennas with moderate boom length for a single performance.

EAntenna LFA antennas for VHF represent the largest development in antennas with moderate boom length for a single performance.
This performance is characterized in that:
- You can listen to very low signals without noise QRM and QRN alter audio clarity.
- Direct feeding is 50 ohms, so there is no loss whatsoever regarding adaptation lines.
- The bandwidth covers the entire band with low SWR / SWR.
- The radiation pattern is wide, so that the signal is not as selective as you rotate the antenna a minimum.
- Its ratio of F / B is high, since only antenna boom lengths can get exaggerated.
- The gain is comparable with other models of antennas always larger in dimensions.
All this is explained because in EAntenna:
- Millimeter by millimeter, manufacture and build CNC machines and / or prepared to hundredths of a millimeter measurements for an accurate measurement.
- It takes care of every piece of aluminum, by filing them smooth exterior and interior. All this by hand, by skilled and prepared for a final product of extreme quality.
- All hardware we use is in stainless steel AISI 304
- The T5 aluminum used is 6061/6063 and 6082 T6, the best alloys for manufacturing antennas and resistant to the weather elements.
- Always LFA EAntenna antennas are insulated from the boom, with German clamps PP (Polypropylene, -30 ° C / +60 ° C).
Specifications 144LFA16
- Square Boom 40/35/30 telescopic sections × 2 mm wall.
- 10mm diameter elements except LOOP is 13mm and 10mm at the tips.
- Mast plate of 150x100mm with 6mm thick with square U-bolts M6 boom to the plate and U-bolts of M8 to the plate to the mast.
Features of the 144LFA16
- This antenna is what I was looking final. Winner of competitions (EA4LU with one 144LFA16, has won the Spanish championship in 2010 and 2011).
- With a gain unmatched in this length of boom, large understand what makes our antennas. And of course, a F / B greater than 33 dB, for the most demanding.
- Simple and quick, because the boom joints are very easy to assemble.
- Antenna very solid construction, and with a moderate weight to withstand the wind.
- Available for enfasar 2 or 4 units in a short (under table include phasing), and to make a profit no big antenna can get.
SPECIFICATIONS | EAntenna 144LFA16 |
---|---|
Frequency Range: | 144 ~ 146 MHz |
Gain: | 17.45 dBi |
F / B: | 33.7 dB |
SWR: | 1:1 ~ 1:2 |
Impedance: | 50 Ohm |
Maximum Power: | 5 kW. |
Boom length: | 10.92 m. / 35.8 ' |
Wind Resistance: | ≥ 160kmh / 100mph ≥ |
Weight: | 13.7 kg / 30.2 pounds |
* Gain dBi (gain over isotropic dipole in free space) = -2.15 dBd
** Ratio Gain Front / Back "F / B" (gain when the antenna is rotated 180 ° azimuth direction)
Recently Viewed
- EAntenna£304.95(Inc VAT at 20%)