This performance is characterized in that:

• You can listen to very low signals without noise QRM and QRN alter audio clarity.
• Direct feeding is 50 ohms, so there is no loss whatsoever regarding adaptation lines.
• The bandwidth covers the entire band with low SWR / SWR.
• The radiation pattern is wide, so that the signal is not as selective as you rotate the antenna a minimum.
• Its ratio of F / B is high, since only antenna boom lengths can get exaggerated.
• The gain is comparable with other models of antennas always larger in dimensions.

All this is explained because in EAntenna:

• Millimeter by millimeter, manufacture and build CNC machines and / or prepared to hundredths of a millimeter measurements for an accurate measurement.
• It takes care of every piece of aluminum, by filing them smooth exterior and interior. All this by hand, by skilled and prepared for a final product of extreme quality.
• All hardware we use is in stainless steel AISI 304
• The T5 aluminum used is 6061/6063 and 6082 T6, the best alloys for manufacturing antennas and resistant to the weather elements.
• Always LFA EAntenna antennas are insulated from the boom, with German clamps PP (Polypropylene, -30 ° C / +60 ° C).

• 30x2mm square boom. Available for both FM and SSB, as the mast plate is behind the elements, thus eliminating mast interactions with the elements.
• 10mm diameter elements except LOOP is 13mm and 10mm at the tips.
• Mast plate 100x100mm with 6mm thick with M6 U-bolts are available for bars up to 55mm. in diameter.

Features of the 144LFA4

• With this antenna may realize, that just 4 elements results can be achieved with few antennas of this size can be made. This antenna has a provision that only for 2 or 4 antennas enfasadas improve long boom lengths.
• Simple and quick, because the boom of the antenna is delivered in one piece.
• Antenna very light weight but very robust.
• Available for enfasar 2 or more units in a short (under table include phasing) with our Power Splitter.