EAntenna 432LFA15 (15,69 dBi – 32,87 dB F/B) - R2010139
£125.95 ( £104.96 EXC. VAT )
Add to cart
Product Information
  • Overview
  • Description
Dimensions 164x10x10cm, Weight 4.1kg  



EAntenna LFA antennas for UHF represent the largest development in antennas with moderate boom length for a single performance.

This performance is characterized in that:

  • You can listen to very low signals without noise QRM and QRN alter audio clarity.
  • Direct feeding is 50 ohms, so there is no loss whatsoever regarding adaptation lines. 
  • The bandwidth covers the entire band with low SWR / SWR.
  • The radiation pattern is wide, so that the signal is not as selective as you rotate the antenna a minimum.
  • Its ratio of F / B is high, since only antenna boom lengths can get exaggerated.
  • The gain is comparable with other models of antennas always larger in dimensions.

All this is explained because in EAntenna:

  • Millimeter by millimeter, manufacture and build CNC machines and / or prepared to hundredths of a millimeter measurements for an accurate measurement.
  • It takes care of every piece of aluminum, by filing them smooth exterior and interior. All this by hand, by skilled and prepared for a final product of extreme quality.
  • All hardware we use is in stainless steel AISI 304
  • The T5 aluminum used is 6061/6063 and 6082 T6, the best alloys for manufacturing antennas and resistant to the weather elements.
  • Always LFA EAntenna antennas are insulated from the boom, with German clamps PP (Polypropylene, -30 ° C / +60 ° C).
Specifications 432LFA15
  • 30x2mm square boom.
  • 6mm diameter elements except LOOP is 13mm and 10mm at the ends.
  • Mast plate of 150x100mm with 6mm thick with square U-bolts M6 boom to the plate and U-bolts of M8 to the plate to the mast.

Features of the 432LFA15

  • This antenna is designed for people with just 322 centimeters boom, want to aim for optimum results at 432 MHz in contests such as daily QSOs to do with people who are at least 250-400 kms away.
  • An extra wide and clean lobe, haca of this antenna ideal for beginners in DX in this band.
  • Simple and quick, because the boom joints are very easy to assemble.
  • Antenna very solid construction, and a very acceptable weight.
  • Available for enfasar 2 or 4 units in a short (under table include phasing), and to make a profit no big antenna can get.
SPECIFICATIONSEAntenna 432LFA15
Frequency Range:432 ~ 433 MHz
Gain:15.69 dBi
F / B:32.87 dB
SWR:1:1 ~ 1:2
Impedance:50 Ohm
Maximum Power:5 kW.
Boom length:3.22 m. / 10,55 '
Wind Resistance:≥ 200kmh / 125mph ≥
Weight:4.1 kg / 9 pounds

* Gain dBi (gain over isotropic dipole in free space) = -2.15 dBd

** Ratio Gain Front / Back "F / B" (gain when the antenna is rotated 180 ° azimuth direction)

If you’d like us to let you know as soon as this product comes back into stock, please enter your email address and mobile number below.
Yaesu
Icom