This performance is characterized in that:

• You can listen to very low signals without noise QRM and QRN alter audio clarity.
• Direct feeding is 50 ohms, and one run.
• The bandwidth of the OWA is the best technology development to cover the entire width of the band, and have low SWR / SWR.
• The radiation pattern is similar to the LFA, but has more gain than these.
• Its ratio of F / B is medium to high, offsetting the high gain front.

All this is explained because in EAntenna:

• Millimeter by millimeter, manufacture and build CNC machines and / or prepared to hundredths of a millimeter measurements for an accurate measurement.
• It takes care of every piece of aluminum, by filing them smooth exterior and interior. All this by hand, by skilled and prepared for a final product of extreme quality.
• All hardware we use is in stainless steel AISI 304
• The T5 aluminum used is 6061/6063 and 6082 T6, the best alloys for manufacturing antennas and resistant to the weather elements.
• Always LFA EAntenna antennas are insulated from the boom, with German clamps PP (Polypropylene, -30 ° C / +60 ° C).

• Boom 30x2mm square sections.
• 13mm elements. in diameter divided into 2 parts for 50 MHz to 70 MHz and complete, for better transport.
• Mast plate of 250x100mm with 6mm thick with square U-bolts M6 boom to the plate and U-bolts of M8 to the plate to the mast.

Features of the 5070OWA9

• If your problem is the space to put antennas for 2 bands, with this simple boom, you get a very good gain in the 2 bands. And most importantly, we are all on the same coaxial drop.
• Even going to the field or portable, with a simple TV rotor can move without problems.
• Simple and quick, because the boom joints are very easy to assemble.
• Antenna very solid construction, and with an acceptable weight.