EAntenna 50LFA5L (11,26 dBi ヨ 25 dB F/B) - R2010116

EAntenna 50LFA5L (11,26 dBi ヨ 25 dB F/B) - R2010116
Part Number: 17800.06-5L
£306.95 ( £255.79 EXC. VAT )
Pre-Order. Click to notify me
Shipping to:
Add to cart
Call Now
Product Information
  • Overview
  • Description
Dimensions 207x10x10cm, Weight 9kg  

The EAntenna LFA antennas for 50 MHz represent the largest development in antennas with moderate boom length for a single performance.

This performance is characterized in that:

  • You can listen to very low signals without noise QRM and QRN alter audio clarity.
  • Direct feeding is 50 ohms, so there is no loss whatsoever regarding adaptation lines. (You can request an optional cable terminated with connector and soldered PL-UHF, N or BNC on the end if required)
  • The bandwidth covers the entire band with low SWR.
  • The radiation pattern is wide, so that the signal is not as selective as you rotate the antenna a minimum.
  • Its ratio of F/B is high, since only antenna boom lengths can get exaggerated.
  • The gain is comparable with other models of antennas always larger in dimensions.
Specifications 50LFA5L
  • 35x35mm square boom.
  • Telescopic elements in 2 sections; central 13mm diameter and 10mm tips, except LOOP made in 6mm.
  • 250x100mm mast plate with 6mm thick and square U-bolts M6 to attach to the boom and M8 U-bolts to the mast.

Features of the 50LFA5L

  • When you have an installation thinking something more serious, think, Why not May 1 elements?, Since starting out there, this antenna is the first that must consider.
  • 50LFA5 If you fall short, no doubt, with an option 50LFA5L substantially better than his little sister. His 5.72 meters of boom help get low signals when the F2 is active.
  • With this lobe as the antenna, the noise will not be problem for you. Width without noise, symptom of adjacent noise levels.
  • Simple and quick, because the boom joints are very easy to assemble. And the elements are attached by DIN 912, M3 and Hose Clamp the adjustable elements for fast installation and durable fastening.
  • Antenna very solid construction, and a very acceptable weight.
  • Available for stack 2 or 4 units in a short (under table include phasing), and to make a profit no big antenna can get.

* Gain in dBi (Gain over isotropic dipole at free space) -2,15= dBd
** Front to Back gain ratio  “F/B” (The Gain in the back of the antenna)

Recently Viewed
If you’d like us to let you know as soon as this product comes back into stock, please enter your email address and mobile number below.