EAntenna 50LFA6XL (12,33 dBi 22,6 dB F/B) - R2010124
Dimensions 252x17x11cm, Weight 12.65kg
The EAntenna LFA antennas for 50 MHz represent the largest development in antennas with moderate boom length for a single performance.
This performance is characterized in that:
You can listen to very low signals without noise QRM and QRN alter audio clarity.
Direct feeding is 50 ohms, so there is no loss whatsoever regarding adaptation lines. (You can request an optional cable terminated with connector and soldered PL-UHF, N or BNC on the end if required)
The bandwidth covers the entire band with low SWR.
The radiation pattern is wide, so that the signal is not as selective as you rotate the antenna a minimum.
Its ratio of F/B is high, since only antenna boom lengths can get exaggerated.
The gain is comparable with other models of antennas always larger in dimensions.
35x35mm square boom.
Total lenght elements in 13mm diameter and 10mm the LOOP.
250x100mm mast plate with 6mm thick and square U-bolts M6 to attach to the boom and M8 U-bolts to the mast.
Features of the 50LFA6XL
G0KSC said, is the best antenna for 6 meters ever designed. This antenna has more than 12 dBi antennas something comparable only 7 elements and a 8 meter boom boom.
With an extremely wide lobe for this kind of antenna, makes it easy to hear the many latitudes stations without having to adjust the minimum grades of its rotor, relative to the direction where it points.
Simple and quick, because the boom joints are very easy to assemble. And the elements are attached by DIN 912, M3 and Hose Clamp the adjustable elements for fast installation and durable fastening.
Antenna very solid construction, and a very acceptable weight.
Available for stack 2 or 4 units in a short (under table include phasing), and to make a profit no big antenna can get.
* Gain in dBi (Gain over isotropic dipole at free space) -2,15= dBd ** Front to Back gain ratio “F/B” (The Gain in the back of the antenna)