EAntenna 50LFA9 (14,69 dBi ﾖ 27,11 dB F/B) - R2010123
Notify Me When Available
The EAntenna LFA antennas for 50 MHz represent the largest development in antennas with moderate boom length for a single performance.
This performance is characterized in that:
You can listen to very low signals without noise QRM and QRN alter audio clarity.
Direct feeding is 50 ohms, so there is no loss whatsoever regarding adaptation lines. (You can request an optional cable terminated with connector and soldered PL-UHF, N or BNC on the end if required)
The bandwidth covers the entire band with low SWR.
The radiation pattern is wide, so that the signal is not as selective as you rotate the antenna a minimum.
Its ratio of F/B is high, since only antenna boom lengths can get exaggerated.
The gain is comparable with other models of antennas always larger in dimensions.
Telescopic boom sections in 60/55/50x2mm square boom.
Telescopic elements in 2 sections; central 13mm diameter and 10mm tips, except LOOP made in 6mm.
250x150mm mast plate with 10mm thick and square U-bolts M8 to attach to the boom and M8 U-bolts to the mast.
Features of the 50LFA9
If you think it falls short in gain with 50LFA7 or 50LFA8, the next step is the 50LFA9. This antenna is designed for Amateur Radio Band seeking magic in its “life”. Operators are only at 50 MHz on the run of DX in this band, and of course, with this antenna you will not miss any.
Would you like contest?, As well as, this antenna is ready to win contests without using great powers.
Simple and quick, because the boom joints are very easy to assemble. And the elements are attached by DIN 912, M3 and Hose Clamp the adjustable elements for fast installation and durable fastening.
Antenna very solid construction, and a very acceptable weight.
Available for stack 2 or 4 units (under table include phasing). * Gain in dBi (Gain over isotropic dipole at free space) -2,15= dBd ** Front to Back gain ratio “F/B” (The Gain in the back of the antenna)