Ciro Mazzoni Baby Loop - Latest version!

All Baby Loops now come pre-installed with RS-232 modules worth £79.95

We ship internationally including the USA daily. Please add your address on check out and we will ship to the USA for approx £395 due to the size of the box. Conversion to $US is handled by your credit card provider or paypal. We suggest you use xe.com for latest exchange rate. Remember to add the USA power supply if required (accessory option - shown top right)

Huge demand for this product! 

New ATU Loop Antenna Contoller 2.0 ver 232 New 32-bit CPU new LCD 16x2 high contrast keyboard USB fully automatic with RS-232. 

Included in the price supports protocol ICOM-YAESU-ELECRAFT (KENWOOD DUE MARCH 2016)

Firmware update via RS USB

Support LAN Ethernet optional (2016)

Support Optional RS232 (with I/RS232) - select your option on drop down box. Adding this option, you can control your new Ciro Baby or Midi Loop via either a Yaesu or Icom transceiver. As you change bands the loops follows automatically, no need to enter the frequency used via the keypad.

Continuous coverage from 6.6MHz to 29.8MHz

The smallest and most popular selling loop-antenna. Diameter is only 1m (ca. 38 inch). For this antenna space is not a problem: on the balcony, on the roof (as long as it's 5m away anything that can interact). The gapless frequency-range is 6,9 up to 29,7 MHz. It comes ready to use with mast clamp.

Over the years manufacturers and indeed home brewers have been trying to make reliable Magnetic Loops because of their extreme compact size, frequency range and immunity to noise.

Finally, an Italian manufacturer Ciro Mazzoni has perfected the design and is able to offer two versions covering the entire 80m-10m range built to ultra-professional standards.

Ciro Mazzoni loops are made of pure aluminum and even the Baby-Loop uses 50mm ( 2 inch) diameter of tubing. Because of the large surface area, there is less loss of gain and both ends are welded onto the socket, with zero screw connections so no contact resistance.

The tuning capacitor on both loops is not a simple variable capacitor but a huge variable plate capacitor fabricated out of aluminum, with an air-dielectric. Both plates are also welded directly to the loop and are virtually indestructible on high power. The distance between the plates is 14mm (ca. 1/2 inch) on the smallest Baby-Loop antenna.

A weather resistant actuator opens or closes the loop and thus tunes the plate capacitor (SWR tuning).

Capacitance can be varied by the motor and can be adjusted to achieve best SWR via a control unit in your shack. In spite of their compact size, the antennas are resonant in a wide frequency-range - do you know of any antenna which has a diameter of just one meter (ca. 38 inch) but a frequency range of 40m-10m without gaps?? Check out the new Baby & Midi-Loops from Ciro-Mazzoni.

The automatic control unit has a tuning circuit installed and is operated via a small keypad: just enter the desired frequency, wait a few seconds for automatic tuning of the antenna and go. No trying, no lost notes on settings, no checking with the SWR meter. The current frequency and SWR is shown on the LCD display. Maximum power load is 250W continuous with the automatic control unit.

ML&S are the sole distributors of Ciro Mazzoni Loops for UK & Ireland.

TROUBLE SHOOTING GUIDE - CLICK HERE.   PDF MANUAL - CLICK HERE

A weather resistant actuator opens or closes the loop and thus tunes the plate capacitor (SWR tuning).

The capacitance can be varied by a motor and can be adjusted to the best SWR via a control unit in your shack. In spite of their compact size, the antennas are resonant in a wide frequency-range - do you know of any antenna which has a diameter of just one meter (ca. 38 inch) but a frequency range of 40m ... 10m without gap?? Take this one...

Tuning of the antennas is done with an automatic control unit. The control units are powered by an external 24V DC power supply (Only supplied within the EU).

Download: Loop-Manual (PDF, EN, 5MB)