0 0

Gap Voyager DX 4-Band 160/80/40/20m

  1. Home
  2. AERIALS
  3. Antenna Manufacturers
  4. GAP Antennas
    5. Gap Voyager DX 4-Band 160/80/40/20m
Gap Voyager DX 4-Band 160/80/40/20m
Gap Voyager DX 4-Band 160/80/40/20m
Gap Voyager DX 4-Band 160/80/40/20m
Write a review
£489.95 ( £408.29 EXC. VAT )
ESTIMATED SHIPPING COST:
£11.95
Shipping to:
Add to wishlist
Add to cart
Product Information
  • Overview
 
 
 
This is the first antenna manufactured specifically to provide efficient low band operation. Emphasis was given to 160m and 80m when designing the VOYAGER. 
Unlike the Challenger, the VOYAGER employs a capacity hat with circular ring to reduce the physical height to 13.5m while maintaining an electrical height of 20 m. A capacity hat is the most efficient way to reduce height, maintain bandwidth and eliminate corona. 
The entire band on 80m (!!), 40m and 20m, 90 KHz bandwidth on 160m. 
As is the case with the CHALLENGER three insulated counterpoises of 17m are required, the deployment pattern is very flexible - also possible around corners. 
Four guy anchor points 7.5m from the base mount are required. The guy brackets and aluminum pivot are supplied but not the guy rope itself. 

Weight39 lbs
Dimensions104 x 10 x 3 in
Bands
160m, 80m, 40m, 20m
Bandwidth Under 2:1
Entire band on 80m, Entire band on 40m, Entire band on 20m, 160m over 90 KHz
Height
45 ft
Weight
30 lbs
Wind Load
7 sq ft (Requires two sets of guy ropes)
Mount
Ground. Aluminum pivot and guy brackets supplied.
Counterpoise
3 at 57 ft, Deployment pattern is very flexible.
Ground Area Required
4 guy anchor points 25 ft from base mount
Recently Viewed
If you’d like us to let you know as soon as this product comes back into stock, please enter your email address and mobile number below.
Yaesu
Icom