AlexLoop RC-2 Remote Control
SKU Part Number: ALEXLOOP-RC-2
Effective and comfortable tuning: AlexLoop RC-2   For successful operation of a loop antenna, very precise tuning to the desired operating...
Read More
£449.99 £374.99
Pre Order
call

Seen this product cheaper elsewhere?

Call 0345 2300 599

Effective and comfortable tuning: AlexLoop RC-2

 

For successful operation of a loop antenna, very precise tuning to the desired operating frequency is always essential due to its narrowband nature. Especially with a portable setup, however, it can sometimes be challenging and time-consuming to fully meet this requirement.

 

The AlexLoop Controller RC-2 is the result of several years of development work and takes over the function of a "steady hand" for the tuning process for you. 

 

With this upgrade, the existing tuning knob on the tuner of your AlexLoop Hampack Loop is simply replaced with a small motor unit, which in turn is connected to a controller, in just a few simple steps. In addition to a large tuning knob, this handy controller has another knob that allows you to select high and low tuning speeds as needed. Thus, both the band can be changed quickly and extremely precise fine tuning can be performed.

 

Especially practical: Thanks to the 5.80 m long connection cable between motor unit and controller and an additional RG-58 coaxial cable of the same length, you no longer have to go to the antenna for every tuning operation! You can operate the tuner of your loop comfortably from the table and thus effectively have more time to concentrate on the actual radio operation.

 

For transport to your next adventure, a small, padded bag serves. It offers ideal protection for all components and is visually adapted to the design of your AlexLoop Hampack backpack. Another bag contains the connection cable and the coax extension, equipped with BNC socket and plug. Of course, all necessary assembly material and tools are included, so that you can quickly modify your AlexLoop Hampack and put it into operation.

 

A standard 9 volt block battery is required for the power supply (not included).

Effective and comfortable tuning: AlexLoop RC-2

 

For successful operation of a loop antenna, very precise tuning to the desired operating frequency is always essential due to its narrowband nature. Especially with a portable setup, however, it can sometimes be challenging and time-consuming to fully meet this requirement.

 

The AlexLoop Controller RC-2 is the result of several years of development work and takes over the function of a "steady hand" for the tuning process for you. 

 

With this upgrade, the existing tuning knob on the tuner of your AlexLoop Hampack Loop is simply replaced with a small motor unit, which in turn is connected to a controller, in just a few simple steps. In addition to a large tuning knob, this handy controller has another knob that allows you to select high and low tuning speeds as needed. Thus, both the band can be changed quickly and extremely precise fine tuning can be performed.

 

Especially practical: Thanks to the 5.80 m long connection cable between motor unit and controller and an additional RG-58 coaxial cable of the same length, you no longer have to go to the antenna for every tuning operation! You can operate the tuner of your loop comfortably from the table and thus effectively have more time to concentrate on the actual radio operation.

 

For transport to your next adventure, a small, padded bag serves. It offers ideal protection for all components and is visually adapted to the design of your AlexLoop Hampack backpack. Another bag contains the connection cable and the coax extension, equipped with BNC socket and plug. Of course, all necessary assembly material and tools are included, so that you can quickly modify your AlexLoop Hampack and put it into operation.

 

A standard 9 volt block battery is required for the power supply (not included).

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request. Large items cannot be returned if they have been assembled, unless faulty.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]