FTdx5000MP HF/50 MHz 200W Transceiver
- Radio Features
- Customer Reviews
The Yaesu FTdx5000 is an awesome rig to look at, but it is even more impressive "under the hood". Yaesu engineers have achieved 112 dB dynamic range and an IP3 [3rd Order Intercept Point] of +40 dBm (CW, 500 Hz BW).
Newly designed, extra sharp roofing filters for VFOA/Main receiver are selectable between 300 Hz (optional on some versions), 600 Hz, 3 kHz, 6 kHz and 15 kHz. Yaesu incorporates two of their famous custom designed 32 bit floating point DSP chips based on the TI TMS320C6727B running at 300 MHz one for VFO A and one for VFO B.
Enjoy state of the art on the transmit side with a pair of reliable VRF150 FETS in a push-pull configuration yielding 200 watts (75 watts class A operation). Three electro-luminescent subdisplays indicate sub frequency, graphical wave and menu functions. The rear panel features a 9 MHz IF out from VFO Main receiver. Other enhancements include: large multi-function meter and variable CW audio peak filter.
SM-5000 Station Monitor Bandscope is Optional with the Limited Version
Download the brochure here
Download the review here
5MHz(60m) band is not activated as delivered from the factory. If you'd like to activate then please download the following instructions.
FT dx 5000MP LimitedIncluded; 300 Hz Roofing Filter – Included; ±0.05ppm OCXO – Included.Rugged 200 Watt Output PowerThe FTDX 5000MP robust and high-power Final Amplifier Stage incorporates two super reliable FET, VRF-150 (Drain-Source Voltage 170 V/Gate Source Voltage ±40 V, Total Device Dissipation 300 W) in a push-pull configuration, offers solid 200 W output (75 W Class A operation).Internal Power SupplyThe FT DX 5000MP has its own built-in power supplyTWO Totally Independent ReceiversAll FT DX 5000 Transceivers include Two (2) Totally Independent Receivers to give you Performance and Flexibility previously only provided by much more expensive radios.SUPERB 3rd-Order Dynamic Range & 3rd-Order Intercept Point (IP3)SSB (2.4kHz BW)Super Sharp “Roofing” Filters
10 kHz SEP.:106 dB, IP3 +40 dBm
CW (500Hz BW)
10 kHz SEP:112 dB, IP3 +40 dBm
2 kHz SEP. :105 dB, IP3 +36 dBm
1 kHz SEP. : 99 dB, IP3 +25 dBm
*VFO-A/Main Receiver @ 14 MHz, IPO1Super sharp “Roofing” filters for VFO-A/Main Receiver.High Performance Yaesu Custom-designed 32-bit Floating Point DSP
Filters are Selectable between *300 Hz, 600 Hz, 3 kHz (6-pole crystal filter), 6 kHz, 15 kHz (4-pole MCF)
*300 Hz filter is included in the FTDX 5000MPThe legendary high performance Yaesu Custom-designed 32-bit Floating Point DSP based on the TI TMS320C6727B (@300 MHz), one EACH for VFO-A and VFO-B.Variable CW Audio Peak Filter & High/Low-Cut FilteringVariable CW Audio Peak Filter, and High/Low-Cut filtering created through the very latest in DSP technology.True Analog Meter Precision
- CW Width: 50/100/150/200/250/300/350/400/450/500 Hz
- CW Pitch Frequency: 300~1050 Hz (10 Hz Steps)Enjoy the same Huge Size Metering System as the FT DX 9000 series with True Analog Precision and Instant Reaction Time.New Function Displays for Ease of OperationThree Electro Luminescence clear Displays included for easier operation and control of the Sub-Frequency, Graphical Wave and Menu function.IF Output AvailableIF Output (9 MHz) from VFO-A/Main ReceiverPractical Level Indication System for Most Important SettingsThe FTDX 5000MP provides loads of practical Level Indication that clearly show settings of Mic-Gain / RF Power / CW-Pitch / Keyer Speed / Processor Level / VOX Delay Time / Break-In Delay Time.Introducing the SM-5000 Station Monitor Bandscope - Optional with the Limited Version
-They can be controlled ON/OFF independently!If you need a good Bandscope to enhance your operations, you are going to love our all-new SM-5000 matching station monitor. Included with the Bandscope is a complete, enhanced stereo speaker system with superb audio quality - the speakers are point at you instead of up into the air above the radio!Other Valuable Options
- SM-5000 Station Monitor
- Yaesu Data Management Unit DMU-2000, and utilize its powerful Audio Scope, Oscilloscope, Spectrum Scope, logging, and Rotator Control capabilities using your own personally selected and purchased computer display monitor.
- Yaesu External Fully-Automatic Micro-Tuning Units. Three modes available: A (160 m Band), B (80 & 40 m Bands), C (30 & 20 m Bands)
FTdx 5000mp Ltd
Had this radio for just over a month now & slowly getting used to it. All I can say is \\\wow!!!. . So much better receiver than even my FTdx 3000 which was great. Amazing reports on Tx audio, and the Sm5000 station monitor is so good that I hardly ever need to use my panadapter. Great service from ML&S as always, would not by from anyone else. Doug GW6VEI
Best Transceiver I have Encountered
One word Wow I received the 5000mp on march 12th this year the performance of the receiver is second to none,I use a Heil PR-781 microphone with the radio and get reports of Crystal clear audio. All controls are right in front of you no having to troll menus to find the power Knob or Contour Control everything's there A+++ Well done Yaesu de G0UDG
Best I've ever owned
Got mine secondhand from ML&S (Traded in IC 756 pro 3 and Kenwood TS 480 HX) DSP is awesome. Transmit audio if mentioned at all is always praised. Spectrum scope not as useless as some reviewers claim but you can certainly live without it.. Bottom line is I can't see me replacing it in my lifetime unless it dies before I do
Yaesu FTdx5000 Accessories£324.95(Inc VAT at 20%)
You Might be interested in