ANAN-10E (Revised) HF & 6M SDR Transceiver ****DEPOSIT****
SKU Part Number: ANAN-10E
Price TBC - Secure yours with a £200 deposit today.  Reintroducing the ANAN-10E, this is a Pre-Order,  place yourself in the Queue you need to...
Read More
£200.00 £166.67
Pre-Order Deposit
call

Seen this product cheaper elsewhere?

Call 0345 2300 599

Price TBC - Secure yours with a £200 deposit today

Reintroducing the ANAN-10E, this is a Pre-Order,  place yourself in the Queue you need to place a Pre-Order, and you will only be charged once your order is ready to Ship. 

 

  ANAN-10E (Revised) AD9866 Based SDRs
Bands 160M - 6M 160M - 10M
Rx Dynamic Range 99dB 78dB
Tx Output 15-20W 4-5W
FCC Compliant YES Not on 10M
Antenna Ports 3 1
Audio Codec Yes Optional
Audio Amplifier Yes No
Mic/Headphone Ports Yes No+

Specifications & Highlights:

  • Continuous, uninterrupted, receive coverage from 10KHz to 55MHz.
  • 14bit ADC and DAC
  • Supports 2 fully independent receivers (sharing the same antenna - and with suitable PC software)
  • Each receiver can display 48/96/192kHz of spectrum
  • Blocking Dynamic Range (ARRL Method) no detectable gain compression below ADC overload
  • Transmit and receiver image rejection > 110dB
  • Full duplex operation, any split over the entire 160m to 6m range.
  • Transmitter two-tone 3rd order IMD of -50dBc on 20m @ 10W PEP
  • 10-20W RF output on 160 – 10m amateur bands, 8-10W on 6m
  • Built-in high-performance preamp, with a noise floor typically -135dBm in 500Hz
  • Software-selectable 31dB input attenuator in 1dB steps
  • High-performance receiver –  (ie Dynamic Range typically 125dB)
  • FPGA code can be updated via the Industry Standard TCP/IP network Ethernet connection
  • Seven user-configurable open-collector outputs, independently selectable per band and Tx/Rx (for relay control, etc - with sequencing via PC code)
  • Separate open-collector PTT connection for amplifier control, etc, with sequencer
  • Microphone PTT jumper-selectable from tip or ring connection
  • Bias for electret microphones via jumper
  • Four user-configurable 12-bit analogue inputs (for ALC, SWR etc)
  • Three user-configurable digital inputs (for linear amplifier over temperature, etc)
  • Operate from a 13.8v DC supply

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request. Large items cannot be returned if they have been assembled, unless faulty.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]