We use
cookies and similar technologies
to help give you the best experience on our site and to show you relevant advertising. If you continue to use this site, we’ll assume that you’re happy to receive all cookies
DX Engineering EZ-BUILD® UWA Center-T and End Insulator Kits DXE-UWA-KIT
SKU Part Number:
DXE-UWA-KIT
DX Engineering EZ-BUILD® UWA Center-T and End Insulator Kits are designed for building wire antennas for high-power operations. This model will...
Read More
Read More
£30.00
£25.00
Pre Order
Seen this product cheaper elseware?
Call 0345 2300 599DX Engineering EZ-BUILD® UWA Center-T and End Insulator Kits are designed for building wire antennas for high-power operations. This model will mount to any DX Engineering Balun for a balanced and isolated wire antenna, or this insulator kit may be used directly with DX Engineering 300 Ohm Ladder Line for a non-resonant multi-band dipole.
All EZ-BUILD® kits include our lightweight, high strength, UV-protected center-T and end insulators. They feature an exclusive serpentine wire grip for insulated DX Engineering antenna wire and our high strength, high power 300 ohm ladder (window) line. Threading the wire or window line through the center and end insulator openings in a serpentine manner creates a grip that is so strong, the wire ends do not need to be looped, wrapped, or soldered. EZ-BUILD® kits allow for fast and easy field adjustments!
The DX Engineering EZ-BUILD® Center-T includes a centered top 3/8 in. hole for the attachment of an antenna support rope, and the End Insulators accept up to 5/16 in. antenna support rope.
Our EZ-BUILD® kits simplify the construction of your wire antenna, with wire crimp terminals and stainless steel hardware. For a wire antenna, built with a DX Engineering Balun at the feed-point, the coax feedline may be secured with the optional DX Engineering Coax Strain Relief which features an aluminum bracket, neoprene-cushioned P-clamps, and stainless steel hardware. This method supports the feedline without subjecting the balun connector to the strain of the coaxial cable's weight or movement.
DX Engineering EZ-BUILD® UWA Center-T and End Insulator Kits let you create any type of wire antennas, including single-band, multi-band, multi-frequency, folded dipole, doublet and inverted-V, off-center fed, Windom, Zepp, long wires, rhombic, V-beam, or loop antennas.
EZ-BUILD® UWA Center-T may be used as a strain relief for our 300-ohm ladder line at the ground end or house end of the run, or as the strain relief on the feed end of a vertical wire or long wire antenna.
Since soldering is not necessary when building an antenna with this kit, it is perfect for Field Day use, portable operations, or even for the weekend experimenter. However, it is certainly the best choice for your permanent wire antenna system.
This UWA-KIT is for building a wire antenna with any DX Engineering Balun or 300 Ohm Ladder Line.
Use the EZ-BUILD® UWA213-KIT for the construction of an RG-213 or RG-8U coax fed wire antenna without a balun, that will be operated at high power and high duty cycle modes of operation, such as AM, RTTY, or FM. The UWA8X-KIT will handle low and medium power levels and tolerate low SWR levels.
DX Engineering EZ-BUILD® UWA Center-T and End Insulator Kits include:
-- One center-T insulator featuring an exclusive no-loop, no-solder wire, multiple wire, or 300 ohm ladder line serpentine grip design, which allow for the rapid field adjustment of wire lengths; the center-T includes a centered top hole for attaching support ropes
-- Two end insulators featuring the no-loop, no-solder, serpentine grip design
-- Two stainless steel wire connection bolts, nuts, and washers.
-- Six crimp ring terminals for antenna and ladder line wire connections
-- Additional stainless steel hardware for mounting DX Engineering baluns
DX Engineering baluns, antenna wire, 300 ohm ladder line, and support rope are sold separately.
Only your imagination is the limit to the practical applications for which this useful insulator system may be used. It is made from a very strong UV resistant poly-resin plastic that can handle the weight of huge wire antennas, and a DX Engineering balun as well as the attached coaxial cables.
Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
So, keeping an inexpensive EZ-BUILD® DXE-UWA-KIT on hand for your next wire antenna project is a great idea!
All EZ-BUILD® kits include our lightweight, high strength, UV-protected center-T and end insulators. They feature an exclusive serpentine wire grip for insulated DX Engineering antenna wire and our high strength, high power 300 ohm ladder (window) line. Threading the wire or window line through the center and end insulator openings in a serpentine manner creates a grip that is so strong, the wire ends do not need to be looped, wrapped, or soldered. EZ-BUILD® kits allow for fast and easy field adjustments!
The DX Engineering EZ-BUILD® Center-T includes a centered top 3/8 in. hole for the attachment of an antenna support rope, and the End Insulators accept up to 5/16 in. antenna support rope.
Our EZ-BUILD® kits simplify the construction of your wire antenna, with wire crimp terminals and stainless steel hardware. For a wire antenna, built with a DX Engineering Balun at the feed-point, the coax feedline may be secured with the optional DX Engineering Coax Strain Relief which features an aluminum bracket, neoprene-cushioned P-clamps, and stainless steel hardware. This method supports the feedline without subjecting the balun connector to the strain of the coaxial cable's weight or movement.
DX Engineering EZ-BUILD® UWA Center-T and End Insulator Kits let you create any type of wire antennas, including single-band, multi-band, multi-frequency, folded dipole, doublet and inverted-V, off-center fed, Windom, Zepp, long wires, rhombic, V-beam, or loop antennas.
EZ-BUILD® UWA Center-T may be used as a strain relief for our 300-ohm ladder line at the ground end or house end of the run, or as the strain relief on the feed end of a vertical wire or long wire antenna.
Since soldering is not necessary when building an antenna with this kit, it is perfect for Field Day use, portable operations, or even for the weekend experimenter. However, it is certainly the best choice for your permanent wire antenna system.
This UWA-KIT is for building a wire antenna with any DX Engineering Balun or 300 Ohm Ladder Line.
Use the EZ-BUILD® UWA213-KIT for the construction of an RG-213 or RG-8U coax fed wire antenna without a balun, that will be operated at high power and high duty cycle modes of operation, such as AM, RTTY, or FM. The UWA8X-KIT will handle low and medium power levels and tolerate low SWR levels.
DX Engineering EZ-BUILD® UWA Center-T and End Insulator Kits include:
-- One center-T insulator featuring an exclusive no-loop, no-solder wire, multiple wire, or 300 ohm ladder line serpentine grip design, which allow for the rapid field adjustment of wire lengths; the center-T includes a centered top hole for attaching support ropes
-- Two end insulators featuring the no-loop, no-solder, serpentine grip design
-- Two stainless steel wire connection bolts, nuts, and washers.
-- Six crimp ring terminals for antenna and ladder line wire connections
-- Additional stainless steel hardware for mounting DX Engineering baluns
DX Engineering baluns, antenna wire, 300 ohm ladder line, and support rope are sold separately.
Only your imagination is the limit to the practical applications for which this useful insulator system may be used. It is made from a very strong UV resistant poly-resin plastic that can handle the weight of huge wire antennas, and a DX Engineering balun as well as the attached coaxial cables.
Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.
So, keeping an inexpensive EZ-BUILD® DXE-UWA-KIT on hand for your next wire antenna project is a great idea!
Shipping:
We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.
Returns:
If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:
Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request.
Warranty Terms and Conditions
Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.
For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.
International Warranty information
Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]