Digirig Mobile
SKU Part Number: DRMOB-CONFIG
USB Cable not included. See cable here   Digital modes interface for amateur radio combining audio codec, serial CAT interface and PTT control....
Read More
As low as £119.99 £99.99
Availability: In stock
call

Seen this product cheaper elsewhere?

Call 0345 2300 599

USB Cable not included. See cable here

 

Digital modes interface for amateur radio combining audio codec, serial CAT interface and PTT control.

This listing is for Rev 1.9 using TRRS connectors. Backward compatible to Rev 1.6

  • combines audio codec, serial CAT interface and PTT switch
  • supports full featured CAT interface: PTT, bands, tuning etc. (not just VOX based PTT)
  • uses a single USB connection to computer minimizing the cables mess
  • serial computer aided transceiver (CAT) port can be configured for logic levels, RS-232, CI-V or TX-500 (learn more)
  • works with all major OS flavors: Windows, MacOS and Linux
  • permanently available independently from CAT port an open-collector PTT switch controlled by RTS signal of the COM port to interface HTs and mobile radios
  • axillary connection points to CM108 codec – for simple Allstar homebrew node builds
  • uses widely supported CP2102 serial interface (latest driver) and CM108 audio codec (generic audio device – no driver necessary)
  • small rugged aluminum enclosure ideal for mobile operations
  • interfaces the transceiver using widely available 3.5mm jacks (TRRS) for simple homebrew cable builds
  • growing collection of pre-made cables including popular Icom, Yaesu, Elecraft, Baofeng, Xiegu transceivers
  • isolation can be easily added using inexpensive USB isolator dongle

 

Notes regarding the interface configuration:

  • PTT option is always available independently from CAT and it works with any radio
  • CAT configuration is done with solder jumpers and can not be changed operationally
  • Digirig’s default configuration for serial CAT is 3.3V logic levels. If the interface is ordered together with the transceiver cables and there is no ambiguity the configuration will be changed to match the cables. Please use order notes field or follow up with the email if you have a specific preference.
  • Learn more about CAT configurations here


Use schematic for the pinout reference if building homebrew cables.

 
 
Cable Conntection Guide:
 

Yaesu FT-8xx:

Select for Yaesu FT-8xx, Xiegu, HTs or any radio without CAT support

SKU: FT8XXMOBILE Categories: Cables, Data Cables Tags: Alinco DR-735E, Alinco DR-735T, cables, digirig mobile, Icom IC-207, Icom IC-207H, Icom IC-208H, ICOM IC-2720H, Icom IC-2800, Icom IC-2820, Icom IC-7000, Icom IC-706MKIIG, Icom IC-7100, Icom IC-7400, Icom IC-746PRO, Icom IC-9100, Icom IC-910H, Icom ID-880, Kenwood PG-5G, Kenwood PG-5H, Kenwood TM-251, Kenwood TM-255, Kenwood TM-451, Kenwood TM-455, Kenwood TM-733, Kenwood TM-733A, Kenwood TM-D700, Kenwood TM-D700A, Kenwood TM-D710, Kenwood TM-D710A, Kenwood TM-D710E, Kenwood TM-D710G, Kenwood TM-G707, Kenwood TM-G707A, Kenwood TM-G707E, Kenwood TM-V71, Kenwood TM-V71A, Kenwood TM-V71E, Kenwood TM-V71G, Kenwood TM-V7A, Kenwood TS-480HX, Kenwood TS-480SAT, Kewnood TM-V708, Yaesu FT-100D, Yaesu FT-100DE, Yaesu FT-100DR, Yaesu FT-1500, Yaesu FT-1500M, Yaesu FT-450, Yaesu FT-450D, Yaesu FT-7100, Yaesu FT-7800, Yaesu FT-7800E, Yaesu FT-7800R, Yaesu FT-7900R, Yaesu FT-8000, Yaesu FT-8000R, Yaesu FT-8100, Yaesu FT-817, Yaesu FT-817ND, Yaesu FT-818, Yaesu FT-818ND, Yaesu FT-840, Yaesu FT-847, Yaesu FT-8500, Yaesu FT-857, Yaesu FT-857D, Yaesu FT-8800, Yaesu FT-8800E, Yaesu FT-8800R, Yaesu FT-8900, Yaesu FT-8900R, Yaesu FT-891, Yaesu FT-897, Yaesu FT-897D, Yaesu FT-950, Yaesu-FT-100

Complete set of transceiver side Digirig Mobile cables for your Yaesu FT-8xx.

  • cables work for FT-100, FT817, FT-857, FT-897, FT-817ND, FT897D, other Yaesu, Kenwood and ICOM transceivers
  • one serial CAT (Mini Din-8) cable and one Audio+PTT (Mini Din-6) cable
  • coiled cable keeps things nice and tidy by preventing knots and kinks
  • about 24″ relaxed, 72″ fully stretched
  • shielded and RF choked with ferrite beads on both ends to prevent RFI
  • premium quality materials and craftsmanship

The cables in this listing use TRRS connections for Digirig revision 1.6 or later. Please leave a note with your order if you want TRS cables for previous revisions of the interface.

Yaesu and ICOM transceivers typically require logic levels configuration of Digirig, Kenwood radios use RS-232 levels

Note: Yaesu FT-891 only uses audio/PTT cable. This transceiver model does not expose the serial interface lines and instead implements serial CAT internally via its own USB connection. More info here.

Note: Yaesu FT-991A has an internal sound cards and a serial USB bridge. No external interface is required for this transceiver.

Discovery TX-500

Configuration for Lab599 TX-500 transceivers

Kenwood - RS-232

RS-232 levels used in Elecraft KX, Kenwood with DB9 connector

Icom CI-V

CI-V configuration for ICOM radios

Compatible radios feature 13 pin Mini Din connector and 3.5mm TRS CI-V CAT connector.

  • IC-7000
  • IC-703
  • IC-706
  • IC-706MKII
  • IC-706MKIIG
  • IC-7100
  • IC-718
  • IC-7200
  • IC-78
  • IC-970A
  • IC-970E
  • IC-970H
  • IC-7410
  • IC-9100

Kenwood TS-480

Digirig Mobile 1.6+ cables for Kenwood transceivers using MiniDin6 and DB9 connectors

SKU: TS480MOBILE Categories: Cables, Data Cables Tags: Kenwood TS-480, Yaesu FT-450, Yaesu FT-450D, Yaesu FT-950, Yaesu FTDX-1200, Yaesu Ftdx-3000, Yaesu Ftdx-3000d

Xiegu G90

Xiegu G90 and Xiegu X5105 cables for Digirig Mobile

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request. Large items cannot be returned if they have been assembled, unless faulty.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]