DX Engineering 12 Meter BTV Add-On Kits DXE-AOKB-12M
SKU Part Number: DXE-AOKB-12M
DX Engineering 12 Meter BTV Add-On Kits add 12 meter coverage to the Hustler BTV series of vertical antennas without giving up any existing band...
Read More
£100.00 £83.33
Availability: In stock
call

Seen this product cheaper elsewhere?

Call 0345 2300 599
DX Engineering 12 Meter BTV Add-On Kits add 12 meter coverage to the Hustler BTV series of vertical antennas without giving up any existing band coverage.

These kits will operate across the entire 12 meter band, 24.890 through 24.990 MHz, with an SWR of 1.5:1 or less. They can handle full legal limit power and add negligible wind loading to the antenna. Simply install the kit, check the tuning (if needed, make some minimal tuning adjustments to the vertical) and you're on the air with an additional band!

If your BTV is installed on the roof or in an elevated position, four resonant radials for 12 meters should be added (9 ft., 4-5/8 in. long, each).

Your BTV vertical can have both the DXE-AOKB-12M 12 Meter add-on-kit and the DXE-AOKB-17M 17 Meter add-on-kit installed at the same time. They do not interact with each other.

Materials supplied with these kits include:

* Pre-assembled 12 Meter element wire with #10 soldered ring terminals 
* Four Stainless Steel Band Clamps with Threaded Studs 
* Bottom Mounting Bracket 
* Spring-loaded End Insulator to keep the 12 Meter element wire tight 
* Upper Insulated Mounting Bracket 
* Two 11-1/4 in. long Tuning Rods 
* Scotch-Brite® Pad for cleaning the 12 Meter element connections 
* All Necessary Stainless Steel Hardware 

Note: Whenever the DX Engineering "Documentation" tab is available, please look at the associated files for additional product information.

The 12 meter band can be lots of fun. Be ready for the next band opening! Add one of these DX Engineering 12 Meter BTV Add-On Kits to your BTV antenna!

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]