RF Space CloudIQ The next chapter in #connected software defined radios

RF Space CloudIQ The next chapter in #connected software defined radios
RRP: £ 839.94
£599.95 ( £499.96 EXC. VAT )
Not Available to Order
Shipping to:
Add to cart
Product Information
  • Overview
  • Downloads and Files
No longer available. 

The Cloud-IQ is the latest high performance software defined receiver from RFSPACE. The Cloud-IQ offers two modes of operation. The IQ mode, offers 24 bit, IQ streaming to the PC over ethernet. This mode uses our SpectraVue software or third party programs like SDR-Radio, SDR# and GNU radio. The stand-alone “Cloud” mode includes a built-in internet server. In this mode, the radio performs the tuning and demodulation of signals and transmits the demodulated information back to a PC, OS-X, Linux or Android client anywhere in the world. 

How does it compare to the SDR-IQ:
  1. -Cloud-IQ offers 1.2288 MHz IQ sample rate vs. 196 kHz of the SDR-IQ. NEW 1.8 MHz IQ rate.
  2. -Uses ethernet interface vs. USB. Can be placed far away from computer.
  3. -Sensitivity is over 15 dB better.
  4. -Broader frequency coverage of 9 kHz to 56 MHz
  5. -Includes low bandwidth cloud mode for access anywhere in the world.
  6. -Powered by a small power supply or USB powered.
  7. -Includes an internal adjustable trigger for capture of repetitive signals (pulsars, Codar, chirps).
  8. -2 antenna input ports for remote or local selection of two antennas.
  9. -All HD2, HD3 products better than -90dBc at -1dB below clipping point.
  10. -Includes a wideband 56 MHz wide spectrum analyzer mode.
  11. -10x faster interface
  12. -Optional RS-232 3.5mm to DB9 cable for external radio control.
  13. -Built-in TCXO

    1. -HF and VHF monitoring
    2. -External high resolution panoramic and spectrum displays
    3. -GMDSS networks
    4. -Internet of Things (IoT) remote access point
    5. -Geolocation of remote signals
    6. -Distributed radio and sensor systems
    7. -Remote signal surveillance
    8. -Ionospheric sounding

      1. -Cloud-IQ receiver
      2. -USB power cable
      3. -5V 1 Amp USB output power supply with US blade connector 240 V capable.
      4. -Ethernet cable
      5. -SpectraVue software CD
      6. -SDRanywhere application for Android, PC and Mac OS
Cloud-IQ Files Section:
  1. Click the following for the Getting Started Guide - This are the getting started instructions.
  1. Click the following for the CloudSetup User Guide - This guide explains networking basics and use of the CloudSetup application to configure IP addresses etc.
  1. Click the following for the CloudSetup Application - CloudSetup application to configure Cloud-IQ

 Click the following for RemoteSDRclient Application for Windows - Application used to operate the Cloud-IQ in remote Cloud mode
  1. Click the following for RemoteSDRclient Application for Mac OS - Application used to operate the Cloud-IQ in remote Cloud mode
  1. Click the following for the RemoteSDRclient User’s Guide

    Click the following for the SDRanywhere Android Client
     - Application used to operate the Cloud-IQ in remote Cloud mode from an Android device.
Recently Viewed
If you’d like us to let you know as soon as this product comes back into stock, please enter your email address and mobile number below.