PortaPack For HackRF One, KIT

PortaPack For HackRF One, KIT
£209.95 ( £174.96 EXC. VAT )
In Stock
Shipping to:
Add to cart
Call Now
Product Information
  • Overview
BEWARE COPIES!! You may see much cheaper versions advertised on eBay and similar. These are not the genuine article. 

PortaPacks use name-brand components sourced from large and reputable component distributors. The boards are assembled to higher-than-necessary standards. The manufacturer tests each unit using a very persnickety tester that was purpose built for the job. You will have access to the
 designer's expertise if you need any support questions or have problems. Of course, purchase of PortaPacks from us supports my ongoing efforts to enhance the hardware and software, and develop new hardware.

Add a PortaPack H1 to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack H1 attaches to your HackRF and adds a touchscreen LCD, navigation controls, headphone jack, 2.5ppm clock reference, real-time clock, micro SD card slot, and custom aluminum case.

Just add a USB battery, and you're ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast ARM processors in your HackRF. No computer is necessary (except for reprogramming firmware).

SSB, AM, narrowband FM, wideband FM audio reception, with spectrum waterfall. [Details]
Wideband (18MHz) spectrum analysis and waterfall.
Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT). [Details]
HackRF mode runs HackRF firmware for use with host computer SDR software.
PPM calibration for more accurate tuning.
Sleep mode saves power by turning off just the display.
You may also find the Furrtek HAVOC firmware very interesting!

The PortaPack H1 is open-source -- hardware and firmware. The source files are published on GitHub. Contributions, forks, and bug reports are welcome!

2.4 inch, 240 x 320 RGB LCD with resistive touch panel.
Four-way arrow keys, rotary jog wheel, and select button.
Headphone/microphone jack, compatible with recent Samsung and Apple mobile headsets (possibly others).
2.5 parts-per-million temperature-compensated clock reference.
Coin battery for preserving settings and date/time.
Micro SD card slot for data and code storage.
Custom milled aluminum case, anodized black.

Some assembly is required. The PortaPack comes with a "spudger" (guitar pick) you can use to remove your HackRF One from its case. Bolts, washers, spacers and a wrench are included to install the two boards into the aluminum case. The assembly steps are documented in the support wiki and videos.

PortaPack H1 does not include a HackRF One. You can buy a HackRF One from the Great Scott Gadgets retailers. Many PortaPack resellers also have the HackRF One, so you can purchase them together.

Your HackRF will continue to function with computer-based SDR software, when you put the PortaPack into "HackRF Mode".

PortaPack H1 is compatible only with the HackRF One. It is not compatible with the earlier HackRF Jawbreaker design. If you have an RF shield installed on your HackRF, the PortaPack should fit just fine.

PortaPack H1 requires an external battery. Any USB-connected battery should work, though they vary widely in quality and poorly-designed batteries may inject voltage regulator noise into the radio.

The PortaPack H1 and HackRF One will not replace your handheld ham radio receiver. Receive sensitivity varies from band to band, but will not perform as well as a true ham radio receiver.
Recently Viewed
If you’d like us to let you know as soon as this product comes back into stock, please enter your email address and mobile number below.