main product photo
ACOM 1010 (USED)
SKU Part Number: 170167
The product is in good condition, including AC cable and manual. No box. Frequency Coverage All amateur bands from 1.8 through 29.7 MHz: 1.800...
Read More
Finance from £46.51 a month
£1,750.00
Availability: In stock
call

Seen this product cheaper elsewhere?

Call 0345 2300 599

The product is in good condition, including AC cable and manual. No box.

Frequency Coverage

  • All amateur bands from 1.8 through 29.7 MHz:
    • 1.800 - 2.000 MHz (160 m band)
    • 3.500 - 4.000 MHz (80 m band)
    • 5.020 - 5.455 MHz (60 m band)*
    • 7.000 - 7.300 MHz (40 m band)
    • 10.100 - 10.150 MHz (30 m band)
    • 14.000 - 14.350 MHz (20 m band)
    • 18.068 - 18.168 MHz (17 m band)
    • 21.000 - 21.450 MHz (15 m band)
    • 24.890 - 24.990 MHz (12 m band)
    • 28.000 - 29.700 MHz (10 m band)
  • (*) Please, refer the applicable regional band plans and laws for specific allocations and limitations;

Rated Power Output

  • 700 W ±0.5 dB PEP or 500 W ±0.5 dB continuous carrier;
  • The ACOM 1010 amplifier delivers its specified output power over both mains supply voltage ranges: 85-132 VAC and 170-264 VAC.

Intermodulation Distortion

  • Better than 35 dB below rated output;

Hum and Noise

  • Better than 40 dB below rated output;

Harmonic Output Suppression

  • Better than 50 dB below rated output;

Input and Output Impedances

  • Nominal value: 50 Ohm unbalanced, UHF (SO-239) type connectors;
  • Input circuit: broadband, SWR less than 1.3, 1.8-30 MHz continuously (no tuning, no switching);
  • Bypass path: SWR less than 1.1, 1.8-30 MHz continuously, 200 W maximum;
  • Output (antenna) impedance matching capability: SWR up to 3 or higher;

RF Gain

  • 11 dB typically, frequency response less than 1 dB (50-70 W drive power for rated output);

Mains Power Supply Voltage

  • 85-132 VAC / 170-264 VAC (100, 110, 120, 200, 210, 220, 230 & 240 V nominal taps, +10% -15% tolerance), 50-60 Hz, Single phase;

Mains Power Consumption

  • 1200 VA at rated output;

Safety and Electromagnetic Compatibility

  • Complies with European Union's CE safety and electromagnetic compatibility requirements;
  • Complies with the US Federal Communications Commission (FCC) regulations - FCC Identifier: SRRA1010, Date of Grant: 20 April 2005;

Size & Weight (operating, excluding connected cables)

  • WxDxH: 402x315x166 mm, 17 kg (15.9x12.4x6.6 inches, 37.5 lbs.);

Shipping Size & Weight

  • WxDxH: Approx. 610x520x370 mm, 20.0 kg (24x19.8x14.6 inches, 44.1 lbs.),
    actual as of September 2024;
  • Please, contact us for shipment details;

Operating environments

  • Temperature range: 0 to +50 degrees Celsius (32 degrees F to 122 degrees F);
  • Relative air humidity: up to 95% @ +35 degrees Celsius (95 degrees F);
  • Height above sea level: up to 3050 m (10000 ft) without output deterioration.

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request. Large items cannot be returned if they have been assembled, unless faulty.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]