Read More

Seen this product cheaper elsewhere?
Call 0345 2300 599*** When using 132ft wire, you may get 160m 'Top Band' with an external AMU/ATU ***
Note that the antenna will be working on multiple frequencies.
Half wave for 80m (~132 feet) will be half wave on 80m and two half waves on 40m, four half waves on 20m, eight half waves on 10m etc... So there may be some gain on the higher bands.
If you want to use it on any particular frequency, just cut the half wavelength wire for that frequency or any frequency from 3-30MHz.
Wire length can be calculated by the following formulas:
-
Length (feet)= 468/Frequency (MHz) or
-
Length (meters)=142.5/Frequency (MHz)
Tuning depends on height above ground and nearby objects.
There are so many ways to install the wire so experiment away.
You can use it as vertical against good radial counterpoise.
The Coax braid must be earthed at the rig end.
Long wires tend to collect electrostatic charge (usually when the weather is stormy) which can produce ESD (electrostatic discharge) at the end of your cable and damage your equipment.
If the transformer is used with an external tuner in conjunction with a single wire antenna, power should be reduced on those bands that show an SWR above 1.2 without the tuner.
*** PLEASE SEE ACCESSORIES FOR 50m LENGTH OF DIPOFLEX WIRE ***
Shipping:
We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.
Returns:
If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:
Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request. Large items cannot be returned if they have been assembled, unless faulty.
Warranty Terms and Conditions
Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.
For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.
International Warranty information
Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]





