We use
cookies and similar technologies
to help give you the best experience on our site and to show you relevant advertising. If you continue to use this site, we’ll assume that you’re happy to receive all cookies
Yaesu FT-710AESS (USED)
SKU Part Number:
U21609
The product is in good condition, including microphone, DC cable, manual, external speaker and...
Read More
Read More
£799.00
Availability: In stock

Seen this product cheaper elsewhere?
Call 0345 2300 599The product is in good condition, including microphone, DC cable, manual, external speaker and box.
SPECIFICATIONS
| GENERAL | |||||||||||||||||||||
| Type: | Amateur HF/VHF transceiver | ||||||||||||||||||||
| Frequency range: | TX: 10-160 m + WARC / 6 m (And 4 m for Europe) RX: 0.03-75 MHz |
||||||||||||||||||||
| Tuning steps: | 1 / 5 / 10 / 20 Hz (AM/SSB/CW) 100 Hz (FM) |
||||||||||||||||||||
| Frequency stability: | ±0.5 ppm @ 0 to 50°C (32 to 122°F), after 1 minute warmup | ||||||||||||||||||||
| Mode: | AM / FM / SSB / CW | ||||||||||||||||||||
| Channels / memory management: | 99 regular with alpha tags (12 characters) 5 QMB (Expandable to 10) 9 scan edge pairs (PMS) Non-volatile EEPROM storage |
||||||||||||||||||||
| Repeater shift / offset: | ±0-1 MHz in 10 KHz steps (10 m) ±0-4 MHz in 10 KHz steps (6 m) |
||||||||||||||||||||
| Power supply: | 13.8 VDC ±15% (4-pin connector) | ||||||||||||||||||||
| Current drain / power consumption: | RX: 1.8 to 2.2 A TX: Max 21 A |
||||||||||||||||||||
| Antenna impedance / connector: | 50 ohm / SO-239 (16.7-150 ohm HF and 25-100 ohm 6 m with ATU on) |
||||||||||||||||||||
| Dimensions (W*H*D): | 239*80*247 mm (9.41*3.15*9.72") | ||||||||||||||||||||
| Weight: | 4.5 Kg (9.92 lb) | ||||||||||||||||||||
| Other features: | CTCSS/PL. 4.3" color TFT. 3D spectrum. DVI display port. Width & bandwidth shift. Contour feature. SD card slot. Voice recording. AESS (Acoustic Enhanced Speaker System). |
||||||||||||||||||||
| RECEIVER SECTION | |||||||||||||||||||||
| Receiver system: | Direct sampling superheterodyne / SDR technology IF: 18 KHz (SSB/CW) - 24 KHz (AM/FM) |
||||||||||||||||||||
| Sensitivity: | AM (10 dB S+N/N, 6 KHz BW) 0.5-1.8 MHz: 6.3 uV 1.8-30 MHz: 2 uV 50-54 MHz: 1 uV 70.0-70.5 MHz: 2 uV FM (15 dB SINAD, 12 KHz BW) 28-30 MHz: 0.25 uV 50-54 MHz: 0.2 uV 70.0-70.5 MHz: 0.25 uV SSB/CW (10 dB S+N/N, 2.4 KHz BW) 1.8-30 MHz: 0.16 uV 50-54 MHz: 0.125 uV 70.0-70.5 MHz: 0.16 uV |
||||||||||||||||||||
| Squelch sensitivity: | |||||||||||||||||||||
| Noise figure: | |||||||||||||||||||||
| Selectivity: |
|
||||||||||||||||||||
| Image rejection: | 70 dB (HF) 60 dB (6 m) |
||||||||||||||||||||
| AF output power / speaker: | 2.5 W at 10% distortion / 4 ohm | ||||||||||||||||||||
| External speaker connector: | TS "Minijack" (3.5 mm), 4-16 ohm | ||||||||||||||||||||
| TRANSMITTER SECTION | |||||||||||||||||||||
| RF output power: |
|
||||||||||||||||||||
| Modulation system: | AM: Low-level (Early stage) FM: Variable reactance SSB: Balanced |
||||||||||||||||||||
| Max FM deviation (Factory set): | Normal: ±5 KHz Narrow: ±2.5 KHz |
||||||||||||||||||||
| Spurious emissions: | Better than -50 dB (HF) Better than -63 dB (6 m) |
||||||||||||||||||||
| Microphone impedance / connector: | 200 ohm to 10 Kohm (600 ohm nominal) / 8-pin (Modular) | ||||||||||||||||||||
| Microphone input level: | ? mV |
Shipping:
We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.
Returns:
If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:
Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request. Large items cannot be returned if they have been assembled, unless faulty.
Warranty Terms and Conditions
Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.
For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.
International Warranty information
Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]
