Read More

Seen this product cheaper elsewhere?
Call 0345 2300 599The product is in good condition, including box.
Frequency Coverage
- All amateur bands from 1.8 through 54 MHz:
- 1.800 - 2.000 MHz (160 m band)
- 3.500 - 4.000 MHz (80 m band)
- 5.250 - 5.450 MHz (60 m band)*
- 7.000 - 7.300 MHz (40 m band)
- 10.100 - 10.150 MHz (30 m band)
- 14.000 - 14.350 MHz (20 m band)
- 18.068 - 18.168 MHz (17 m band)
- 21.000 - 21.450 MHz (15 m band)
- 24.890 - 24.990 MHz (12 m band)
- 28.000 - 29.700 MHz (10 m band)
- 50.000 - 54.000 MHz (6 m band)*
- (*) Please, refer the applicable regional band plans and laws for specific allocations and limitations;
Rated Output Power
- 700 W ±0.5 dB, PEP or continuous carrier;
- You will have to reduce the output power to about 450 W in order to keep the mains current consumption below 16 A if the amplifier is operated at below 200 VAC mains supply voltage.
Intermodulation Distortion (IM3)
- Better than 31 dB below rated PEP;
Harmonic and Parasitic Emissions Output Suppression
- Better than 60 dB (65 dB typically);
Input and Output Impedances
- Nominal value: 50 Ohm unbalanced, UHF (SO-239) type connectors;
- Input circuit: Broadband, SWR below 1.2:1 (1.1:1 typically), 1.8-54 MHz continuous range without retuning or switching;
- RF bypass path: SWR - below 1.1:1, 1.8-54 MHz;
- Acceptable SWR at the output load (the antenna): up to 3:1 with proportional power reduction and up to 1.5:1 for full output power;
RF Power Gain
- 14 dB ±1 dB (typically 27 W drive for 700 W output power);
Mains Power Supply Voltage
- 100-240 VAC, ±10%, 50-60 Hz, Single phase;
Mains Power Consumption at Full Output Power
- 1350 VA or less with power factor of 0.95 or higher;
Mains Power Consumption in Low Energy (Waiting) Mode
- Less than 1 VA;
Safety and Electromagnetic Compatibility
- Complies with European Union's CE safety and electromagnetic compatibility requirements;
- Complies with the US Federal Communications Commission (FCC) regulations - FCC Identifier: 2AJXZ700S, Date of Grant: 22 December 2017;
Size & Weight (operating, excluding connected cables and opened tilt foot bar)
- WxDxH: 326x388x155 mm, 11.6 kg (12.9x15.3x6.1 inches, 25.6 lbs.);
Shipping Size & Weight
- WxDxH: Approx. 535x595x375 mm, 16.0 kg (21.1x23.5x14.8 inches, 35.3 lbs.);
- Please, contact us for shipment details;
Operating environments
- Temperature range: -10 to +40 degrees Celsius (14 degrees F to 104 degrees F);
- Relative air humidity: up to 95% @ +35 degrees Celsius (95 degrees F);
- Height above sea level: up to 3050 m (10000 ft) without output deterioration.
Shipping:
We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.
Returns:
If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:
Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request. Large items cannot be returned if they have been assembled, unless faulty.
Warranty Terms and Conditions
Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.
For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.
International Warranty information
Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]
