Commradio CR-1 (USED)
SKU Part Number: U22239
The product is in good condition, including manual and DC cable. Frequency Coverage and Modes: MW-HF: General Coverage: 500 kHz - 30.000 MHz User...
Read More
£399.00
Availability: In stock
call

Seen this product cheaper elsewhere?

Call 0345 2300 599

The product is in good condition, including manual and DC cable.

Frequency Coverage and Modes:

MW-HF: General Coverage: 500 kHz - 30.000 MHz

User Configurable Band Key:

Amateur Band Selections: 160 m – 10 m

International Broadcast Bands: 120 m – 11 m

AM-SSB-CW manual or auto-mode selection (based on tuned frequency)

International Broadcasting: manual or auto-selection: 5 kHz steps

Automatic -Filter Width select with override (manual selection)

Tuning Resolution (cursor control): 1 MHz / 100 -10 - 1 kHz / 100 - 10 Hz

MDS (minimum discernible signal): nominal -130 dBm in 500 Hz Bandwidth

LW: 150 - 500 kHz is included for experimental purposes. See Hardware Limitations below.

VHF-UHF General Frequency Coverage and Performance:

VHF: Continuous Coverage: 64.0 - 260.0 MHz

UHF: Continuous Coverage: 437.0 - 512.0 MHz

FM Broadcast: nominal -88 dBm in 200 kHz bandwidth

VHF Sensitivity 108.0 - 150.0 MHz: nominal - 98 dBm (or better) for 12 dB SINAD, 15 kHz filter bandwidth (5 kHz deviation)

UHF Sensitivity: nominal -86 to-98 dBm for 12 dB SINAD, 15 kHz filter bandwidth (5 kHz deviation)

Standard frequency steps for each band

VHF-UHF Band Plan:

FM Broadcast: 87.7 - 107.9 - Monaural - 5 kHz audio bandwidth (76.0 MHz International)

Aircraft Bands: 108.000 - 136.975 MHz, AM auto-select -25 kHz channel steps

Amateur: 2 m, 1.25 m, 70 cm (upper portion starting @ 437.0 MHz).

NBFM mode default with SSB-CW mode selects.

Marine & NOAA Weather Radio

Public Service: 137.0 - 225.0: 12.5 and 25 kHz steps.

FRS-GMRS 462 – 467 MHz , 25 kHz Steps

General Coverage 467-512 MHz

Note: 6 m (54 MHz) is not available.

Receiver Architecture:

HF: Dual conversion (VHF-UHF: single conversion) with low -IF, I-Q digital sampling, 32-bit DSP with digital audio CODEC

DSP demodulation algorithms: DSB-AM, SSB, CW, WBFM, NBFM

User Selectable, DSP fixed bandwidth channel filtering selections

Audio System - Digital CODEC

Speaker Driver: 0.8 W into 8 Ohm load

Internal 2.5” diameter, mylar-cone communications grade speaker

External monaural speaker jack (3.5 mm stereo jack - back panel)

Headset Driver: 40 mW into 16 Ohms. (3.5 mm stereo jack - front panel).

Antenna Inputs

LW-MW-HF Port: 1000 Ohm – 3.5 mm jack – Retained S/N’s 601-749. Eliminated starting with S/N 750.

LW-MW-HF Port: 50 Ohm – BNC (female)

VHF-UHF Port: 50 Ohm – BNC (female)

Display

1.5" diagonal - 64 x 128 OLED Display with EMI-filtered lens

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request. Large items cannot be returned if they have been assembled, unless faulty.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]