We use
cookies and similar technologies
to help give you the best experience on our site and to show you relevant advertising. If you continue to use this site, we’ll assume that you’re happy to receive all cookies
4O3A Rotator Genius Sensor single
SKU Part Number:
4O-RGSENS
Rotator Genius is a smart rotator controller that uses a magnetic sensor for reading azimuth. It can be controlled by a Windows or Android...
Read More
Read More
£139.00
£115.83
Pre Order
Seen this product cheaper elsewhere?
Call 0345 2300 599Rotator Genius is a smart rotator controller that uses a magnetic sensor for reading azimuth. It can be controlled by a Windows or Android app.
Motor Control Unit
The central unit can be mounted on the tower base or placed inside the shack.
Rotator Genius can control:
- Low Range DC motors – 3 to 48V, up to 15A of current
- Low Range AC motors – 3 to 48V, up to 15A of current
- High Range AC motors single phase – 110 to 220V
- High Range AC three phase motors – 110 to 380V
- Prop Pitch motors
One Rotator Genius can control two separate motors.
Sensor
The sensor uses a magnetic compass that reads azimuth. This insures you will never have problems with pulse, pot meter sensors, broken indicators or innacurate readings.
Housed in a waterproof box for tower or boom mounting.
Accuracy within 1 degree. No need for initial calibration.
User programmable true north and magnetic north correction.
The sensor can now be used independently from the motor control unit with our AzimuthReader Windows app.
An additional RS485 to USB or RS485 to RS232 converter is required to interface the sensor with your PC.
Network Control
RG can be controlled from a computer or mobile device by an intuitive UI.
It can be setup for remote control over the internnet.
Will be integraded with FlexRadio SSDR and the Mestro panel in a future software update.
Flexibility
Motor control unit is compatable with most rotators on the market.
DIP switches on the device are used to configure:
- AC or DC motors.
- Output voltage is configurable in 25% steps of the input voltage. (25%, 50%, 75% or 100%)
- Low or High Range motors.
- Slow Start or Break motors.
- Single or Three Phase motors.
You can create custom azimuth maps with your QTH in the center by using the NS6T website: https://ns6t.net/azimuth/
Third Party Software
Rotator Genius is now supported and can be controlled by N4PY software. Communcation is performed using a TCP/IP connection insuring maximum stabillity and reliability. The documentation is available in the application help files.
Rotator Genius is a smart rotator controller that uses a magnetic sensor for reading azimuth. It can be controlled by a Windows or Android app.
Motor Control Unit
The central unit can be mounted on the tower base or placed inside the shack.
Rotator Genius can control:
- Low Range DC motors – 3 to 48V, up to 15A of current
- Low Range AC motors – 3 to 48V, up to 15A of current
- High Range AC motors single phase – 110 to 220V
- High Range AC three phase motors – 110 to 380V
- Prop Pitch motors
One Rotator Genius can control two separate motors.
Sensor
The sensor uses a magnetic compass that reads azimuth. This insures you will never have problems with pulse, pot meter sensors, broken indicators or innacurate readings.
Housed in a waterproof box for tower or boom mounting.
Accuracy within 1 degree. No need for initial calibration.
User programmable true north and magnetic north correction.
The sensor can now be used independently from the motor control unit with our AzimuthReader Windows app.
An additional RS485 to USB or RS485 to RS232 converter is required to interface the sensor with your PC.
Network Control
RG can be controlled from a computer or mobile device by an intuitive UI.
It can be setup for remote control over the internnet.
Will be integraded with FlexRadio SSDR and the Mestro panel in a future software update.
Flexibility
Motor control unit is compatable with most rotators on the market.
DIP switches on the device are used to configure:
- AC or DC motors.
- Output voltage is configurable in 25% steps of the input voltage. (25%, 50%, 75% or 100%)
- Low or High Range motors.
- Slow Start or Break motors.
- Single or Three Phase motors.
You can create custom azimuth maps with your QTH in the center by using the NS6T website: https://ns6t.net/azimuth/
Third Party Software
Rotator Genius is now supported and can be controlled by N4PY software. Communcation is performed using a TCP/IP connection insuring maximum stabillity and reliability. The documentation is available in the application help files.
Shipping:
We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.
Returns:
If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:
Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request. Large items cannot be returned if they have been assembled, unless faulty.
Warranty Terms and Conditions
Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.
For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.
International Warranty information
Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]