7m Telescopic Antenna Pole - DX Commander for Dipoles, Doublets and Verticals
SKU Part Number: DXCOM-POLE-7M
Legendary DX Commander introduces the new 7m telescopic pole. This is the small version of its big brother, the 10m DX Commander and delivers you...
Read More
£39.00 £32.50
Availability: In stock
call

Seen this product cheaper elsewhere?

Call 0345 2300 599

Legendary DX Commander introduces the new 7m telescopic pole. This is the small version of its big brother, the 10m DX Commander and delivers you just under 7m in height.

If you need a heavier pole, take a look at the 10m version.

Spec:

  • Length: 6.8m
  • Max diameter of pole inc screw-over end cap 45mm
  • Max diameter of lower tube: 36mm
  • Lower diameter of second tube: 32mm
  • Wall thickness: 1.3mm

 

The last section is solid fibreglass so that super-lightweight dipoles and doubles may be flown from the very top, albeit with some “curve”. This pole is not suitable for hard-drawn copper wire dipoles and doublets (for instance standard G5RVs) because that type wire is too heavy.

I have tested this with a 40m inverted V dipole using 1.2mm equipment hook-up wire with a spec of 7 x 0.2mm strands. I soldered the coax directly to the wire to cut any weight down at the feedpoint and used Aircell 5 coax (very light but similar spec to RG213) to good effect. But this pole will not accept a heavy head-load.

Verticals (Assumes insulated sheathed wire [velocity factor plays a part in the dimensions]:)

  • 40m vertical. Go all the way up the pole with your wire, through the little loop at the top and back down again. Cut the length to tune for perfect match. Total length will be around 12m long. Next time I build this, I’ll give you the exact dimensions
  • 30m Vertical. Cut your element length to 6.8m and fold back the end 6cms to form a loop. You’ll have a 10 MHz pure quarter-wave vertical and your ATU will easily tune 12m and 10m as a bonus.
  • 20m. Leave off the two top sections. Cut your wire to 4.95m. Fold back 6cms. You will have a top-performing 20m mono-bander that will probably out-perform most of your other wire antennas on TX.

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request. Large items cannot be returned if they have been assembled, unless faulty.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]