We use
cookies and similar technologies
to help give you the best experience on our site and to show you relevant advertising. If you continue to use this site, we’ll assume that you’re happy to receive all cookies
LDG AT-1000ProII
SKU Part Number:
AT-1000PRO11
Building on the success of the AT-1000Pro, LDG Electronics has refined and expanded its flagship 1KW tuner. The new AT-1000ProII keeps many of the...
Read More
Read More
£599.95
£499.96
Availability: In stock
Seen this product cheaper elsewhere?
Call 0345 2300 599
Building on the success of the AT-1000Pro, LDG Electronics has refined and expanded its flagship 1KW tuner.
The new AT-1000ProII keeps many of the same features of the previous model, but simplifies the operation. With the two position antenna switch there are 2,000 memories that store tuning parameters for almost instantaneous memory recall whenever you transmit on or near a frequency you've used before. Just key and it tunes! The AT-1000ProII will operate at any power level between 5 and 1,000 watts peak RF input.
The Meter in the picture is optional
- Accessories
- LDG Autotuner Comparison
- What LDG Tuner is right for me?
The new AT-1000ProII keeps many of the same features of the previous model, but simplifies the operation. With the two position antenna switch there are 2,000 memories that store tuning parameters for almost instantaneous memory recall whenever you transmit on or near a frequency you've used before. Just key and it tunes! The AT-1000ProII will operate at any power level between 5 and 1,000 watts peak RF input.
The Meter in the picture is optional
- Accessories
- LDG Autotuner Comparison
- What LDG Tuner is right for me?
Building on the success of the AT-1000Pro, LDG Electronics has refined and expanded its flagship 1KW tuner. The new AT-1000ProII keeps many of the same features of the previous model, but simplifies the operation. With the two position antenna switch there are 2,000 memories that store tuning parameters for almost instantaneous memory recall whenever you transmit on or near a frequency you've used before. Just key and it tunes! The AT-1000ProII will operate at any power level between 5 and 1,000 watts peak RF input.
The AT-1000ProII has a large, easy to read bargraph with two selectable scale ranges (100 and 1,000 watts) as well as SWR meter. The AT-1000ProII will interface with many popular transceivers, enabling their TUNE button to control the AT-1000ProII's operation. Dedicated control buttons allow you to fine-tune capacitance and inductance on those rare occasions when the AT-1000ProII can't find a perfect match by itself.
The AT-1000ProII will tune from 1.8 to 54.0 MHz continuously, and will match an amazing range of antennas, from Yagis and dipoles to inverted-Vs and slopers; virtually any coax-fed antenna from 6 to 1000 ohms impedance (16 150 ohms on 6 meters). Tuning time is usually under 10 seconds. If you're transmitting near a frequency with stored tuning parameters, it will set those parameters in under 0.2 seconds. Longwires or antennas fed with ladder line require an external balun.
· High Power Microprocessor controlled Switched L tuning network
· Two position antenna switch with 2000 memories for each position.
· Adjustable threshold for Auto mode
· Continuous coverage 1.8 to 54 MHz
· Power rating HF (1.8 to 30 MHz):
- 1000 Watts Single Side Band
- 750 Watts CW
- 500 Watts Digital (RTTY, Packet, etc)
· 6 meters: 250 Watts (any mode)
· Capacitor / Inductor fine tune controls
· Tuning time: 0.2 recall, 10 seconds average, 30 seconds max
· Tuning impedance: 6 to 1000 Ohms (approximately 10:1 SWR)
· Dual meter scale 100/1000 watts and SWR
· Tuning power: 5 to 125 watts maximum
· Relay protection software prevents tuning when RF power is high
· LED indicators for Ant and Bypass.
· Optional External 4.5" analog, LED backlit Meter
· Includes 6 foot power cable 5.5 x 2.5 mm
· Power requirements: 11 to 15 volts DC @ 1 Amp (user supplies power source)
· Enclosure sizes: 10W x 11D x 3H (in inches)
· Weight: 5.0 pounds
The AT-1000ProII has a large, easy to read bargraph with two selectable scale ranges (100 and 1,000 watts) as well as SWR meter. The AT-1000ProII will interface with many popular transceivers, enabling their TUNE button to control the AT-1000ProII's operation. Dedicated control buttons allow you to fine-tune capacitance and inductance on those rare occasions when the AT-1000ProII can't find a perfect match by itself.
The AT-1000ProII will tune from 1.8 to 54.0 MHz continuously, and will match an amazing range of antennas, from Yagis and dipoles to inverted-Vs and slopers; virtually any coax-fed antenna from 6 to 1000 ohms impedance (16 150 ohms on 6 meters). Tuning time is usually under 10 seconds. If you're transmitting near a frequency with stored tuning parameters, it will set those parameters in under 0.2 seconds. Longwires or antennas fed with ladder line require an external balun.
· High Power Microprocessor controlled Switched L tuning network
· Two position antenna switch with 2000 memories for each position.
· Adjustable threshold for Auto mode
· Continuous coverage 1.8 to 54 MHz
· Power rating HF (1.8 to 30 MHz):
- 1000 Watts Single Side Band
- 750 Watts CW
- 500 Watts Digital (RTTY, Packet, etc)
· 6 meters: 250 Watts (any mode)
· Capacitor / Inductor fine tune controls
· Tuning time: 0.2 recall, 10 seconds average, 30 seconds max
· Tuning impedance: 6 to 1000 Ohms (approximately 10:1 SWR)
· Dual meter scale 100/1000 watts and SWR
· Tuning power: 5 to 125 watts maximum
· Relay protection software prevents tuning when RF power is high
· LED indicators for Ant and Bypass.
· Optional External 4.5" analog, LED backlit Meter
· Includes 6 foot power cable 5.5 x 2.5 mm
· Power requirements: 11 to 15 volts DC @ 1 Amp (user supplies power source)
· Enclosure sizes: 10W x 11D x 3H (in inches)
· Weight: 5.0 pounds
Shipping:
We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.
Returns:
If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:
Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request.
Warranty Terms and Conditions
Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.
For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.
International Warranty information
Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]