We use
cookies and similar technologies
to help give you the best experience on our site and to show you relevant advertising. If you continue to use this site, we’ll assume that you’re happy to receive all cookies
Dual Ports Handheld Network Analyzer KC901K 9kHz-4GHz Deepace
SKU Part Number:
MYDEL-KC-901-K
Product Highlight
9KHz-4GHz frequency range
1Hz frequency resolution
>42dB Relative directionality
Transmission dynamic range 100dB
Multi...
Read More
Read More
£1,949.00
£1,624.17
Availability: In stock
Seen this product cheaper elsewhere?
Call 0345 2300 599Product Highlight
- 9KHz-4GHz frequency range
- 1Hz frequency resolution
- >42dB Relative directionality
- Transmission dynamic range 100dB
- Multi calibration support
- Built-in RF&AF generator function
- Lightweight, reliable and easy to operate
Product Features
- S11/S12/S21/S22 measurement
- Phase/Return lose/VSWR/SmithChart/Impedance measurement result display
- Spectrum display and Field mode
- RF/AF generator with modulation and level adjusting
- Data save in TF cards
- PC software connection
What in package
- KC901K *1
- User manual *1
- Calibration certification *1
- DC adapter *1
- Strap *1
Main Parameters
Name | Conditions | Minimum | Typical | Maximum | Notices |
Frequency range | valid value | 5kHz | 4GHz | ||
Frequency range | Allow set | 0 | 4GHz | ||
Sweep frequence range | valid value | 1kHz | 4GHz | ||
Maximum Output Level | -6dBm | 0dBm | 6dBm | ||
Internal attenuation range | 0 | 60dB | |||
Receiver normalized noise floor | -130dBm/Hz | ||||
S21 dynamic range | 100dB | RBW:1kHz | |||
Directionality | Absolute | 27dB | |||
Relative(after calibration) | >42dB | ||||
Trace noise | RMS, Port through | 0.005dB | |||
Sweep speed | RBW:10kHz | 0.8ms/pt | |||
Sweep points | 101 | 10001 | |||
Temperature | -40°C | 55℃ | Depends on the battery | ||
Battery life | 3h | Depends on different function | |||
Net Quality | 1.3kg | 1.5kg | |||
Volume | Connector included | 210×120×46mm(L×W×Th) |
Product Highlight
- 9KHz-4GHz frequency range
- 1Hz frequency resolution
- >42dB Relative directionality
- Transmission dynamic range 100dB
- Multi calibration support
- Built-in RF&AF generator function
- Lightweight, reliable and easy to operate
Product Features
- S11/S12/S21/S22 measurement
- Phase/Return lose/VSWR/SmithChart/Impedance measurement result display
- Spectrum display and Field mode
- RF/AF generator with modulation and level adjusting
- Data save in TF cards
- PC software connection
What in package
- KC901K *1
- User manual *1
- Calibration certification *1
- DC adapter *1
- Strap *1
Main Parameters
Name | Conditions | Minimum | Typical | Maximum | Notices |
Frequency range | valid value | 5kHz | 4GHz | ||
Frequency range | Allow set | 0 | 4GHz | ||
Sweep frequence range | valid value | 1kHz | 4GHz | ||
Maximum Output Level | -6dBm | 0dBm | 6dBm | ||
Internal attenuation range | 0 | 60dB | |||
Receiver normalized noise floor | -130dBm/Hz | ||||
S21 dynamic range | 100dB | RBW:1kHz | |||
Directionality | Absolute | 27dB | |||
Relative(after calibration) | >42dB | ||||
Trace noise | RMS, Port through | 0.005dB | |||
Sweep speed | RBW:10kHz | 0.8ms/pt | |||
Sweep points | 101 | 10001 | |||
Temperature | -40°C | 55℃ | Depends on the battery | ||
Battery life | 3h | Depends on different function | |||
Net Quality | 1.3kg | 1.5kg | |||
Volume | Connector included | 210×120×46mm(L×W×Th) |
Dual-Port Network Analyzer
KC901K
- 9KHz-4GHz frequency range
- Dynamic range 100dB
- Multi calibration support
- Built-in RF&AF generator function
- 60dB rf-source attenuation range
- Lightweight, reliable and easy to operate
Dual-port network analysis
S11/S21/S12/S22 Measurement function
Phase/Loss/VSWR/SmithChart/Impedance display method support
Built-in 4 extremely consistent receivers and 24bit synchronized sampling ADCs
Better amplitude measurement linearity
100dB Dynamic Range
Anti-crosstalk circuit design and strict shielding allows the KC901 to obtain a better dynamic range of transmission measurements.
Multiple Calibration Methods
Response and Enhanced Response Calibration
Support cal-kit parameters input to precision calibration
Calibrator female/male conversion
Cable cancelling setting support
Built-in utilities
Based on the network analyzer architecture
We adds Spectrum, RF-source, Comparator, AF-source and Field-meter functions.
Multiple connection modes for remote control via network or USB
Easily store measurement data with TF card
Type-C port for data transfer and battery charge
TF-card solt for data storage
RJ-45 port for ethernet remote connection
5.5×2.5 DC jack support wide range power input
Shipping:
We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.
Returns:
If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:
Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request. Large items cannot be returned if they have been assembled, unless faulty.
Warranty Terms and Conditions
Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.
For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.
International Warranty information
Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]