Sierra Radio Systems SIR-471 20A DC Power Relay Partial Kit with Powerpole Connectors
SKU Part Number: SIR-471
The Sierra Radio Systems SIR-471 is a 20A DC power relay partial kit for the Sierra Station Controller range. It is designed to switch DC power on...
Read More
£29.95
Availability: In stock
call

Seen this product cheaper elsewhere?

Call 0345 2300 599

The Sierra Radio Systems SIR-471 is a 20A DC power relay partial kit for the Sierra Station Controller range.

It is designed to switch DC power on and off to a connected load, making it useful for remotely controlling station accessories, DC-powered equipment, relay-driven systems, and other power circuits from a Sierra Station Controller installation.

The SIR-471 is normally connected to the open-collector relay control outputs on the SIR-321 General Purpose GPIO Module, allowing DC loads to be switched from the Station Controller dashboard or wider automation system.

This is a partial kit. The main relay board is supplied assembled, but the user must solder and install the Powerpole connectors, then assemble the mounting plate and DIN rail clips.

Key Features

  • 20A DC power relay partial kit
  • Designed for Sierra Station Controller systems
  • Used to turn DC power on or off to a connected load
  • Relay rated for 30A
  • PCB traces conservatively rated to 20A
  • 12V DC SPST power relay design
  • Normally controlled from the open-collector outputs on the SIR-321 GPIO module
  • Pull-to-ground relay control input
  • External connections for 12V power input
  • Voltage measurement points for voltage in and voltage out
  • LED indicator shows relay state
  • Includes mounting plate, DIN rail clips, and hardware
  • Powerpole connector installation required
  • Suitable for remote station, repeater site, and shack automation projects

Typical Uses

  • Remotely switching DC-powered station accessories
  • Turning equipment on or off from a Station Controller dashboard
  • Remote HF station power control
  • Repeater site power switching
  • Shack automation projects
  • Switching auxiliary DC loads
  • DIN rail mounted station control panels
  • Adding higher-current DC switching to an SIR-321 GPIO module installation

Station Controller System Role

The SIR-471 adds higher-current DC power switching to a Sierra Station Controller installation.

It is typically controlled by the SIR-321 General Purpose GPIO Module, using one of the GPIO module’s open-collector relay control outputs. This allows a relatively small control output to operate a larger DC power relay for switching equipment or accessories.

The SIR-471 does not communicate directly on the Sierra DCN network. Instead, it is used as a controlled accessory connected to a compatible GPIO or relay control output.

Assembly Note

This product is supplied as a partial kit.

The relay board is supplied with the power relay, LED indicator, and 8-pin connector already installed. The user must solder in the Powerpole connectors and assemble the mounting plate and DIN rail clips before installation.

Connections and Functions

Function Details
Relay type 12V DC SPST power relay
Relay rating 30A
Board trace rating 20A
Control input Pull-to-ground relay control
DC power connections 12V power input and switched output
Monitoring points Voltage in and voltage out measurement points
Status indication LED relay state indicator
Typical controller SIR-321 GPIO module open-collector output
Mounting Mounting plate and DIN rail clips supplied

Specifications

Specification Details
Brand Sierra Radio Systems
Model SIR-471
Product type 20A DC power relay partial kit
Relay type SPST DC power relay
Relay voltage 12V DC
Relay rating 30A
Conservative board rating 20A
Control method Pull-to-ground relay control
Typical control module SIR-321 General Purpose GPIO Module
Connectors Powerpole connectors, user installed
Status indicator Relay state LED
Assembly required Yes, soldering and assembly required

Important Note

This listing is for the SIR-471 20A DC Power Relay Partial Kit only.

SIR-321 GPIO module, SIR-310 host adapter, installation kit, DCN hub, power supply, DC load, wiring, fuses, station equipment, and other accessories are not included unless stated otherwise.

This is a partial kit and requires soldering and assembly before use. The user must install the Powerpole connectors, mounting plate, and DIN rail clips.

Please ensure that the connected load, wiring, fuse protection, power source, and installation are suitable for the voltage and current being switched.

Delivery Information

Shipping & Delivery

We offer a range of UK and international delivery services, including next working day delivery and selected weekend options for eligible orders. Available services, prices and estimated delivery times are shown at checkout.

All orders are despatched within 24 hours. UK domestic orders placed before 2pm are despatched the same day, provided no modification or labour service has been purchased.

Same-Day Despatch

UK domestic orders placed before 2pm are despatched the same day, excluding orders requiring modification or labour services.

Weekend Delivery

Orders requiring weekend delivery must be placed before 2pm on Friday. Orders placed on Saturday are not eligible for next-day or Sunday delivery, even if Sunday Delivery is selected at checkout.

Delivery Service Availability

Delivery options depend on the size, weight, contents and destination of your parcel. Express and weekend services are subject to availability and applicable cut-off times. Oversized or exceptionally heavy items may require a specialist delivery quotation.

Returns Information

Returns & Cancellations

To arrange a return, please contact our team at [email protected] or call 0345 2300 599.

Download Returns Form

Changed Your Mind?

Under the Consumer Contracts Regulations 2013, most purchases made online or by telephone can be cancelled within 14 days of receipt.

Cancellation Period

14 Days

Notify us of your cancellation within 14 days of receiving your goods.

Once you have notified us, you have a further 14 days to return the goods.

Condition of Returned Goods

Please handle all goods with care. Returned items must be in a resaleable condition, complete with their original packaging and all supplied accessories.

You may inspect goods as you would in a shop. However, handling beyond what is necessary for inspection may result in a lawful deduction from your refund to reflect any diminished value.

Important Conditions

Returns Exceptions

The following conditions apply to modified equipment, custom-made cable assemblies, software and labour services.

Modified Equipment & Reversal Charges

Additional return conditions may apply to equipment modified at the customer's request, including wideband transmit or receive modifications.

ML&S may charge a reasonable fee to reverse physical modifications and restore equipment to its original factory specification. Any applicable charge will be agreed in advance and deducted from your refund.

Custom-Made Cable Assemblies

Coaxial cable assemblies manufactured to a customer's specifications are excluded from the 14-day return policy and are non-refundable unless faulty.

Software & Labour Charges

Customer-requested labour and modification charges are non-refundable once the work has been completed.

Computer software may only be returned under the 14-day return policy if it remains sealed and unopened.

Postage Options

Return Postage Charges

Customers are responsible for the direct cost of returning unwanted or incorrectly ordered goods. You may arrange your own suitable return postage or choose one of our optional prepaid return services.

Standard Parcels

Royal Mail Return Label

£5.95

Per parcel

Suitable for eligible standard-sized parcels, subject to Royal Mail restrictions. Free collection is available.

Larger Parcels

DPD Return Label

£7.95

Per parcel

Suitable for larger or heavier parcels, including shipments containing batteries.

Collection Service

DPD Collection

£25.00

Per parcel

Available upon request for eligible addresses, subject to service availability.

Return Postage Information

All prepaid return charges will be confirmed before booking and deducted from your refund.

The prices above apply to eligible UK mainland returns. Oversized items, specialist products and returns from other destinations may require a separate quotation. Estimated return costs will be disclosed before purchase.

Faulty or Incorrectly Supplied Goods

Return postage charges do not apply to faulty, damaged or incorrectly supplied goods returned under statutory rights. In these circumstances, ML&S will arrange a free return using either the Royal Mail or DPD return label service described above.

DPD collection is an additional chargeable service and is not provided free of charge under your statutory rights.

Refund Information

Refunds

How Refunds Are Processed

Refunds are processed without undue delay following receipt and inspection of the returned goods, and no later than 14 days after we receive your returned parcel.

Refunds are issued to the original payment method. Any prepaid return postage charges or lawful deductions for diminished value will be itemised and provided upon request.

Product Support

Warranty Terms & Conditions

ML&S provides warranty cover on new and used equipment, subject to the conditions outlined below.

New Equipment

Minimum 2-Year Warranty

All new products supplied by ML&S include a minimum two-year warranty against manufacturing defects. Batteries are excluded and are covered by separate warranty terms.

Some manufacturers offer extended warranty cover, including a three-year warranty on eligible Yaesu equipment. Any additional cover is subject to the manufacturer's terms and conditions.

Used Equipment

3-Month Warranty

All used products supplied by ML&S include a three-month parts and labour warranty against manufacturing defects. Batteries are excluded from warranty cover.

Warranty Repairs & Exclusions

Our workshop may assess and repair faulty equipment on site or, where necessary, refer it to the manufacturer or an authorised service centre.

Warranty exclusions may include batteries, normal wear and tear, accidental damage, misuse and unauthorised modifications, as specified in the applicable warranty terms.

All warranties are provided in addition to your statutory consumer rights against ML&S, which are not limited by the warranty period.

Overseas Customers

International Returns & Warranty

Unless otherwise stated, ML&S warranty servicing is carried out in the United Kingdom. International customers must contact us before returning goods to confirm the appropriate shipping and customs requirements.

International Return Conditions

International customers are responsible for return postage unless the goods are faulty and ML&S has been notified within a reasonable time.

ML&S accepts no responsibility for additional charges arising from incorrectly completed customs documentation. Any additional duties charged to ML&S as a result will be billed to the customer before the goods are returned.

We're Here to Help

Need Help With a Return?

Our team can assist with returns, postage arrangements, equipment modifications and warranty claims.

Email ML&S

Alternatively, call us on 0345 2300 599.

Nothing in these terms excludes or limits your statutory consumer rights.