OM Power OM2000+
SKU Part Number: OM-2000+
General description of the OM2000+ HF and 50 MHz Amplifier The linear amplifier OM2000+ is designed for all short wave amateur bands...
Read More
£3,749.99 £3,124.99
Pre Order
call

Seen this product cheaper elsewhere?

Call 0345 2300 599

General description of the OM2000+ HF and 50 MHz Amplifier

The linear amplifier OM2000+ is designed for all short wave amateur bands from 1.8 to 29 MHz (including WARC – bands) + 50 MHz and all modes. It is equipped with a ceramic tetrode FU-728F.


Specification of OM2000+:

Frequency coverage: Amateur bands 1.8 – 29.7 MHz including WARC + 50 MHz
Power output: 2000+ W in SSB/CW on HF bands, 1500 W CW/SSB on 50 MHz 1500 W in RTTY
Input power: 40 to 60 W for full output power
Input impedance: 50 Ohm VSWR < 1.5 : 1
Output amplification: 15 dB
Output impedance: 50 Ohm unbalanced
Maximum output SWR: 2:1
SWR protection: Automatic switching to STBY when reflected power is 250W or higher
Intermodulation distortion: 32 dBc
Suppression of harmonics: min -50 dBc ( 30–54 MHz better than 70dBc)
Tube: FU-728F ceramic tetrode
Cooling: Centrifugal blower + axial blower
Power supply: Switchable 220, 230 , 240 V – 50/60 Hz
Transformers: 1 toroidal transformer 3 kVA
Protection circuits: - SWR too high
  - Anode current too high
  - Screen current too high
  - Grid current too high
  - Mistuning of power amplifier
  - Temperature to high
  - Soft start for fuse protection
  - “switch –on blocking “ at opened amplifier
Indications: - OLED display 4 x 20 character
  - Analog 2 systems meter for forward and reflected power
LED indicators: - ON status
  - STBY– standby
  - FAULT – warnings and faults indicator
  - ON AIR – amplifier in transmitting status
Features: - Antenna switch for 3 antennas
  - Memory for faults and warning, easy maintenance
  - Automatic set-up anode current (BIAS ) – no need to manual adjust after changing the tube
  - Temperature controlled 2-speed centrifugal blower ( turbine ) + axial blower
  - Full QSK with silent vacuum relay
  - The smallest and lightest 2000W PA on the market
Mechanical parameters: 390mm x 195mm x 370mm (width x height x depth)
Weight: 24 kg

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]