|
The switch is designed specially to be used for remote (over the Internet ) controlled systems, but can of course be used in other applications also. The switch can be manually controlled via an internal web interface. Together with Remoterig RRC-1258 it can be setup to automatically follow your band changes. The switch connects to the RRC over IP, no serial port is needed. Normally it is powered with 48V via the Ethernet cable according to the PoE standard. This means that the switch can be placed in a tower 100m from the schack. The switch is built in stainless steel and can be placed outdoor. It can be ordered with N-connectors or SO-239 both with PTFE dielectric.
Specifications
Frequency Range:…………………………1,6-55 MHz
Characteristic impendance:………………….50 ohm Outputs:(*1)……………………………………………10 Inputs:……………………………………………………1 Supply voltage PoE (IEEE802.3af):……………..48V Supply voltage Local:………………………….12-15V Power consumption PoE:……………………….60 mA Power consumption Local:………………….Connectors:…………….PTFE dielectric N or SO-239 SWR (1.8-50 MHz):……………………………..<1.1:1 Insert loss (1.8-30 MHz):……………………Insert loss (50 MHz):…………………………Power rating (1.8-30 MHz, SWR <1.3:1)………5kW Power rating (1.8-30 MHz, SWR <2:1)……….2.5kW Power rating (1.8-30 MHz, SWR <3:1)……….1.5kW Ethernet connection(*2):…. RJ45 or 10 pos terminal Mast clamps:…………………….Stainless Steel 51mm Operating temp:……………………………-40 -+60 C Dimensions (WxDxH):……………..200x155x140mm Weight:……………………………………………..0.5 Kg |
|
(*1) All unused antenna outputs are grounded, The RF card control lines are surge protected with Metal Oxide Varistors
(*2) The control cable should be shielded (FTP) CAT-5e or better.
Users manual can be downloaded from the Users manaul page
Orders can be placed in the webshop
|
|
There is a less lower cost version available also which has no built in remote control. You select the antenna by grounding the the input (screew terminal). The RF data is exactly the same as for the remote switch only the control is different. |
|
A PoE Power supply is available in the webshop
Vin =100-240VAC
Vout = 48VDC/0.6A
|
We use
cookies and similar technologies
to help give you the best experience on our site and to show you relevant advertising. If you continue to use this site, we’ll assume that you’re happy to receive all cookies